@JohnC120 you don’t need to switch modes to see what you want, you only need to rotate between screens. My set up is. First Screen basically distance Second Screen Distance to next waypoint Third screen distance to end Then forth screen is breadcrumb (no map, but easy to follow) then altitude profile You can then move between the screens. This is very simplified I have other data like altitude ETA ect which you can program what is important to you. And you can choose how many fields you have in each screen except the breadcrumb and altitude profile.

@Tiago-Gabriel I will check,

@fof1618 Push middle button and screen should wake up for few seconds and then goes back black again. It is a battery saving option, and it remains in custom battery option.

Hi, Samedi problem here Every 2-3 days my watch is disconnected from my phone and i have to remove it from bluetooth paired device and to do the pairing process again.

I’ve preformed hard reset of the watch and now it’s working normally. Duuno why it happened in the first place and I hope it won’t repeat. Thanks all for suggestions.

@zadow said in Pause does not stop the Suunto 9 from reading HR: hat you are interrested in specific data recorded during active time only, however, I would recommend you to open this issue with intervals.icu, or use some 3rd party SW, which is able to cut data recorded during the pause. Good luck and let us know how you dealt with it, once you will Thank you @zadow and yes it is a intervals issue and I have taken up with the the developer.

@Ars-Vitae I cycle but don’t record cadence. So what ever Suunto did would not be perfect for everyone. Custom profile is the way to go. And very easy.

@Phillip-Morgan That is the issue and I am sorry! Nice work on the run! If you continue using the 9baro use ultra mode, which should give you 120h of recording but HR will be off. If you want HR use a belt and you will be fine. The other option is to purchase a Suunto Vertical Solar where Performance mode will be fine for an event that is ~100h.

@Giovanni-Pianigiani Well, you can create your own Sport mode, or use one of the predefined. There are plenty of them. For the ABS, I would be deciding among Aerobics, Circuit training, Cross Training or Gymnastics. The beauty of the Custom sport mode is, that you can create it and adapt it according your needs.

@Gilles-D I was tired with the maths…Sorry 13.3 - 7.8 = 5.5 km, still some meters missing. I also did the theoretical distance of the run : 20.4 km vs 19.3 km measured during the workout. Puzzling.

@Rokic3 I just came here to say that I had the same issue as you and didn’t find much information on the internet. The touchscreen generally works but from time to time it gets stuck or captures the wrong input… I do not know if this is the normal behavior because it is the first one I have but I consider it unacceptable. I will try to change it for a new one of the same model and see if it was just my watch.

Dears, I just wanted to confirm that after longer observation period, it seems that hard reset solved this issue. Guides are being loaded to watch and removed from watch exactly as they are planned in the SA calendar.

@Tieutieu merci pour ta réponse

@Brad_Olwin I was thinking about upgrading to Vertical or Race, but 9 Baro are still working perfectly fine so I will see in the summer, whether there is an improvement as well.

@freeheeler Had another crash today during a structured workout. How do I get the logs off the watch to send them to you?

@Mff73 @freeheeler Thanks both for your reply, and thanks for fixing the fit file / explaining how you did that! Really appreciate it.

@MartinGT I believe the reason for that might be that when not recording the 9B takes less frequent HR datapoints than the Garmin. As a solution you could just record the cycle as an indoor cycle to record the heart rate.