@mechanic maybe there is a misunderstanting of the conception of the alti/baro.

There is one fixed value (absolute pressure) and two variable values (altitude / pressure at MSL). You can adjust both the cuurent altitude and the MSL pressure manually in the watch.
If the absolute value is off though, this cannot be changed afaik.
It is then a sensor malfunction which cannot be overcome with a software change.

@zadow YES!!! It will work! It is a good solution. Thanks!!! Stay strong!

@Mff73
Fridge, not freezer 😁

@surfboomerang not really. Although unlikely. But maybe worth trying, at least before buying a new watch.

@NickK said in Suunto 9 - Alarm for modern days:

@Prenj Can I offer you Suunto 7? It has as many alarms as you wish! On any schedule 😂

LOL believe it or not. I’d only accept a gift to sell it and buy another A3P 😁, or some Gar… if Suunto keeps screwing around with software

Don’t be sorry. ☺

@isazi said in A few 9 Baro Suggestions:

@jthomi sorry, I’m a freak 🙂

I moved the topic, soon we will have the correct places for these

@sartoric said in Navigating with Baro s9:

Because you should always give a try to the tool RTFM

😁 😁

I am man FFS 😂 😂 😂

@silentvoyager there is for sure room for improvement. I created an issue for this btw. I don’t leave these stuff undocumented. 😄

If I were you, I’d try synchronize it to movescount via cable

@sartoric yeah it was accurate. I’m not really tech savvy so I don’t understand how you can get a ‘bad reset’, to then get a ‘good reset’. Still I will try it and reset the watch again.

@surfboomerang said in [S9 watchface FR]: distinguish of tapping to upper half of screen:

unfortunately no new firmware release after 19th of november 2018. So no changes.

I hoped there’s some FW being under testing which could give us some hope… 😉

Same methodology, but same day and continuous run. Just Navstar.
0_1543485452278_navstar_2.5.18.png

0_1543485461486_navstar_2.5.18_sat.png

@rfernandes79 in short: GPS only data are very erratic.

On Flat they can register too much On great ascents they look ok.

Suunto uses a 7m filter (you have to climb 7 to get 7m ascent or more).

however! On strava you can correct this! If that is what interests you

@loopylou72 j This should probably be moved to the appropriate OS, are you on iOS or Android? Could you try this on a stock sport mode? I will check with my watch today too.

sw up -to-date?

@Halcon
Well, first view are common compass navigation indicators. The red is always the North
https://www.suunto.com/Support/Product-support/suunto_spartan_ultra/suunto_spartan_ultra/features/points-of-interest/

The others are zones indicators
https://www.suunto.com/Support/Product-support/suunto_9/suunto_9/features/intensity-zones/#topic_XY1NkxikIEO4TyozWstYig

@gerasimos this is a fantastic idea. I like the idea of customizable long press features for each button. I do like quick access to settings with the middle button, but maybe some additional features could be long press the top/bottom buttons for backlight, screenlock, stopwatch/timer, alarm, start last performed activity (ie. run,swim,bike)[useful for those of us who have one predominant activity]…just to name a few. I am sure that there are many others that people could think of.

@johann-fuehrer … btw: Ambit 3 fails with the same, Ambit 2 (with ANT+) has Power, cadence, HR, speed but no DISTANCE updated. So also not 100% what I need.

@Matteo-Danelli let us know if you have other issues.