@jofre100 said in Heart rate belt turns off heart rate wrist: @Dimitrios-Kanellopoulos no, should I? Yes, try this and see what happens. I do not have my 9 peak with me but will check all this tonight.

@andreas-mandrides said in Indication for notifications: @ttsirkia How can a smartwatch not have an icon telling you you’ve got missed notifications??? Totally mind boggling The Race (Pace?) is a sport watch.

@mjp2504 yes, 24/7 HR monitor is possible

@Mff73 it should be already back to normal, but I doubt that activities that ended up in the period of low TSS will be automatically recomputed.

@imperial001 Endurance mode on Vertical is better than the 9 Peak on performance mode. The Vertical has extra storage for recording because of chip for map storage. Shouldn’t be a problem for your races. The memory of 9 peak hard to assess as HR takes up space and more space with higher intensity. A general guide is the watch will safely store #of hours that battery will last in the chosen mode.

@freeheeler I can answer that, it’s called drill mode, once you enable it, you get another screen where every time you reach the end of pool, you manually press a button to add 25 meters and so forth. Once you’re done with legs only or any other type of technique specific swim where hands don’t move at all, you disable it, you’re back to your normal swim screen. The distance swam under this mode gets appended to your total distance of that swim session. This feature has been missing pretty much since the S line of Suunto watches. However it’s a core feature of any swim training, most pool swimmers won’t skip this, only the Suunto watches do

@herlas You can’t turn the automatic off on Suunto Vertical. So if you manually lap do you get autolaps and manual laps recorded. I have the same issue that brief rests/turns are added to my speed and this adds up over the workout to reduced pace. I’d just like to see my pace more accurately.

Yes, agree with the above comment. Just add in a data field that shows speed and that will show what you are asking for

I have the problem, that the suunto app is not syncing any steps apple, it worked for two days, since then no sync. I already tried to delete and relink the apps. didin’t help. The Settings should be correct (see screenshorts) Using Iphone 12pro on newest iOS and Sunnto 9 and App are also on the newest version.[image: 1707726683340-photo_2024-02-12_09-30-15.jpg] [image: 1707726683354-photo_2024-02-12_09-30-14.jpg] [image: 1707726683371-photo_2024-02-12_09-30-13.jpg] [image: 1707726683379-photo_2024-02-12_09-30-10.jpg]

@Lutz-H https://forum.suunto.com/post/133070

@Alex-Gascón Good to know!! My recommendation is: DO NOT sync your watch actively just before your GPS activity, if you have to do it, do it at least 20/30 minutes before. Let me explain: If for some reason the app/watch sends the AGPS just before the activity the AGPS file needs to be deployed and you won’t get GPS lock easily, you will have to wait at least the 15 minutes that are needed to install the AGPS. If you do a soft reset the AGPS will be deleted as well and will need to be installed again. In my experience if your watch and phone are connected (SA app running in the background, BT on the phone always on) you shouldn’t have any problem and you shouldn’t notice long GPS lock times.

@Someguy22 unfortunately some apps are not compatible with S9 Peak and older watches. Currently there is no weather S+ for your watch.

I’m curious, why doesn’t FusedAlti correct @snafflehound ’s altitude issue? At least at the end of the activity? I have had a similar issue ski touring (suspect it is due to interaction with my clothing), but I thought it might get adjusted by FusedAlti. Also, I assume there is no way to turn off the barometric altitude and just use GPS? How much more accurate is the barometric altitude vs the GPS altitude? Or maybe it depends on many factors…

@Petri-Väisänen said in Zwift for cycling: @Mads-Hintz-Madsen thank you for this suggestion, I’m going to try this. Have you seen any connection issues with Zwift and indoor trainer having a watch recording the ride? I think it’s basically broadcasting only so I wouldn’t expect any issues there? Hi Petri! I have not had any connection issues. As you said the watch just records the broadcasted signal from the indoor trainer which doesn’t affect the Zwift connection. But there is one issue that one could face is if you want to use Bluetooth to connect the trainer to Zwift and the watch. If the trainer only supports 1 Bluetooth connection then this won’t work as you need two Bluetooth connections (1 for Zwift and 1 for the watch). My Wahoo Kicker supports 2 (or is it even 3?) Bluetooth connections so I have no issue with using a full Bluetooth setup. One workaround is to use ANT+ connection from the trainer to the computer running Zwift and use Bluetooth from the trainer to the watch. This is in fact the setup I normally use.

@hardcoresinceeightyfour I also wish various features would be “exercise only”, with raise-to-wake being one of them.

@Tieutieu this is true for vertical and peak pro i think it’s a simple and useful function to put in watch and if is necessary activate it… Not big thing… older watches like ambit series exist the lock button.

@Regis-Letowski-0 as tu exploré le manuel et les différentes options de rétro éclairage ? Ce n’est pas un bug, tu as dû laisser le paramètre du menu panneau de configuration/retroeclairage sur « on » et dans panneau config/parametres/general/affichage, choisi le niveau de luminosité, vérifie que veille est décoché, puis que tourner et activer n’est pas sur off.

@Tieutieu support for multiple sensors of the same kind for example. It’s so inconvenient having to unpair and pair sensors every time when using multiple hr sensors