Thx for your suggestions but unfortunately they didn’t help. Here is what I did: Somehow the magnetic charging pod doesn’t connect properly. So I have to get the watch in the right position. I used a tiny, empty honey jar on top and two candles at both sides to stabilize. Than I moved the whole system around and back and forth until the charging icon appeared. Hands off and don’t touch for several hours. Et voila, the watch is fully charged again. Let’s see what kind of objects i have to use next time ;-).

@Leonid-Yasyukevich good idea. I’ll try that. Thanks.

@Mihail-Kulagin Hi, you need go to general settings -> about -> scroll list down and press few sec bottom button -> scroll again list down to OTA pkg -> here you can see three last firmware updates. And i got a question for you…how do you installed 2.19.42?.

Well, i must say “new” features mostly useless for us, they are for marketing and money profit to company. For us is better to take a laboratory vo2 test, it shows you what you need to train and show your correct hr and pace zones. As example of “new” feature which they sell was fused track to 9 peak, if you check right now at manual for 9 peak you cant find it. I like my 9 peak and i specially buy ti version when they appeared. After a couple of failures due to the mismatch of the suunto + (zonesense and box breathing) there are problems with the battery, I’m trying to solve it, but in Russia it is impossible to get service center support. I think that reliability should be at the top of everything, and then all the newfangled things.

@moreusernameftw I uninstalled and reinstalled the Suunto app on my phone and htat seems to have fixed it. I can now do custom sports.

@jjorgemoura, Other people can verify, but I believe this is a ‘feature’ of the custom battery mode to use the custom mode if there is any change to the default settings ( such as GPS quality, screen off in 10s, etc…). As a test, try starting a training in custom battery mode, with all the default settings, you can end|discard that training, then start a new training. If my hunch is correct, the battery mode should now use the Performance option.

And i forgot to mention 3.Perform a full reset to factory settings. Settings->General->Reset settings

@mrogue_83 bonjour, je fais un retour d’expérience. Après MAJ hier et plusieurs reboot à partir du bouton supérieur de la montre, cette nuit le sommeil a été enregistré. Je pense donc que le problème est résolu. A voir dans le temps.

Hello! I have a similar problem and tried different methods. I even created a similar topic to yours. I think I found a solution, but I need some more time to check. I will write a detailed message under my topic with the solution soon (two or three days to check approximately).

@SensixSicily The 9Peak does not have the hardware to support customization. It is similar to the 9 Baro. Even though the 9PP and 9Peak look similar, the hardware inside is radically different.

Merci beaucoup pour les informations mais il me semble que Fusedati n’apparait pas sur la 9 peak

@moreusernameftw First you need to pair the Verity Sense to the watch. You can do this now, no need to wait until you’re ready to run/exercise. To pair the VS sensor, put it on your arm and turn it on. Then go through the settings/connectivity/pair sensor menus on your watch and select “pair HR sensor”. It’ll tell you to moisten the sensor, which you can obviously ignore for an optical sensor and click to the next step. The watch will then search for and pair to the sensor within a few seconds. When you want to run or whatever exercise using the VS sensor, put it on, turn it on and then go to the exercise start menu in the watch. The watch will automatically connect to the VS, overriding the watch wrist sensor (no need to disable it). As above, you’ll know it’s connected because the heart symbol will have the little “wings” (belt). If you’re still not sure if it’s connected to the VS before you start running, take the watch off and check that the wrist sensor lights are off.

@seanvk thanks

@JonasLarsson Nope, I’ve only used the belt with this Peak 9 The workout starting screen doesn’t even show the icon for belt when this happens, just a blinking grey heart icon. I’ve triple checked that I have wrist HR disabled and HR belt enabled for the exercise to no avail. If I go to watch settings, remove HR belt and pair it again then it works as expected and the pre-workout screen has HR belt icon flashing. But then again when starting the next exercise of same type it doesn’t detect anything.

@Gustavo-Arriola Some news here : https://forum.suunto.com/post/156958

@Roadwarrior I am also having this same issue. Thought it may be a firmware update issue, but the latest update has come and gone and I still can’t see HR history. Hopefully someone can shine a light for us.

@b1kka Hi, I’ve been struggling with a battery issue for at least 6 months, since the last software update. I think I found the problem and a solution. Suunto support has been clueless and just says to send it in for repair. When I put my watch on charge, when the watch thinks it’s at 100% it stops charging. Then I shutdown the watch and turn it back on. Then it will charge more. Keep doing that until it’s close to 100%. My watch used to die in a single day just wearing it normally. Now it lasts a week with FC on and all the normal features. I believe the battery life calibration goes out of whack if the software updates happen when the watch is not 100% and plugged in. And unfortunately Suunto support doesn’t know how to help us.

@guy-s I have recently upgraded from Spartan Ultra to the Peak Pro Titanium. I wear the watch every day and I have noticed that my steps have reduced about 20% just by changing watches. For example, today I did a 10.2 km suburban walk and only recorded 8,971 steps during the walk. I am a rogainer and I know my actual is about 1,200 steps per km. I had nothing in my watch hand. I am very happy with the Peak Pro Titanium, but I am disappointed that my step counts have been hammered by a watch change.