@awehbe Hi, eventually try to put it in shipping mode (ie watch off, and then when plugged again it will reset itself). Follow this post or search forum for “Shipping+Mode” https://forum.suunto.com/post/46365

@spartan not possible in Spartan watches.

@Mff73 said in Problems with transferring data to Movescount: @Filip-Košár @regger Glad it works now, but I am a bit perplex here. You both use SA, and your issue was not to see your moves in Movescount, and now it works. SA doesn’t sync to Movescount. Seems that SA to Strava didn’t sync. I also connect my watch with the cable and Suuntolink to have the moves also in Movescount. And this move has been transferred with a delay also.

@Fenr1r I never tried other GPS in the parking lot. I wasn’t used to running there. I only did it recently because of the Corona Virus. But it’s an interesting thing to try!

@mountainChris Searched this forum for the issue and it seems that this issue with multiple sets of intervals not showing up properly in SA is actually an issue with FW. According to another thread this was fixed for S9 a long time ago so my guess is that with Spartan series this will go unfixed until the bitter end.

@RegtMarx Did you already connect once with suuntolink also after the update ? Are you trying to get a fix ? Are you outside ?

@Sagi-Agiv yes please contact support.

@Brad_Olwin said in Training program/planned moves: @Roox911 said in Training program/planned moves: @sartoric got it to work with the mc app (found it on the web) Basically you have to unpair it from SA and pair with MCapp - then let it sync the planned training days - then reverse the pairing/un-pairing. Works perfectly (well… i mean its cludgy and unnecessarily silly, but it works!) Currently have about 2 months of my training plan synced… will probably finish up till end of summer after dinner tonight. edit: well, ok… its not seamless, turns out i lost all of my custom exercises, which is a bit of a pain in the ass. Guess i’ll have to fix that tonight as well. Every time you sync with MC app you will lose the custom sport modes in SA. I simply do not customize in SA. The routes work just fine. Well not entirelly true. I use Movescount (WEB) and I use SA. I have custom sport modes and heart rate graph on some sports (from SA). I sync watch with cable to movescount (routes, moves, settings) and I sync watch wirellesly with SA (moves only not setting and routes). Works perfect, jou just need 20 minutes to configure this settings. One note, I if have to edit sport modes i need to fully connect to SA and disconect from Movescount, than forget pairing with SA and connect to movescount again and partially connect to SA (no sport customization, only connection)

@Viking1291 we are all here to learn from our heroes, don’t worry

Hello, I`m back again. I started “running” with this famous audioguide from SUUNTO App. After 20 seconds I started “running” from the Spartan Sport. Autostopp off on both. It was really great. I got all informations I wanted from the audioguide and sometimes I took a look on the watch to see my heardrate and so on. What concerns me a little bit is the different distance between app and watch. (2km app - 2,15watch, 3km app - 3,19 watch, and 4.10km app to 4.32 watch.) Even I started the watch later. I was accompanied by my my wife and her Huawei tracker and its distance was very close to the SA. The results of this workout are shown in the same way in the Suunto app and in the Sports tracker app. As Mff73 mentioned, there are 2 workouts in the apps and I have to delete one of them. From now, I will start workouts from SA and the watch (because of the audioguide) and will keep the “Watch-workout” for my statistics. [image: 1588418835843-dsc_0001.jpg] Thanks and best greetings !

@isazi even stranger - Since gettign the watch a few days ago, i was thinking ot myself that the screen was a bit low resolution and blurry, worse than my old fenix 3 (it was hard to make out the definition in the small numerals around the edge of the bezel on the sunrise/sunset watchface)… turns out that after the reboot, its crystal clear and much easier to read… such a happy coincidence.

@Ahmet-Kayhan-Öğretir Hello! Do you tried these steps: https://www.suunto.com/en-gb/Support/faq-articles/lifecycle/how-to-reset-your-suunto-watch/ ? Also, if nothing else works, you can try to wait until the full battery uncharge. After this, the watch may work fine. It helped me once.

@Roox911 said in suunto app vs Spartan sport modes: on Strava (as it syncs to strava before i can update to skateboard) you could turn off any data service on the phone before syncing activites then correct and re-enable it

@Bulkan Thank you very much for your reply! I’d like to use my Spartan just for recording my training data, i.e. the Neo is controlled by the Apple TV (Rouvy) which gets its data from the Neo via BLE. It’s also connected to a Wahoo Tickr HRM via BLE. I have configured the CABLE such that there are three BLE devices visible: a) the HRM device (from Wahoo Tickr/ANT), b) Cycling Power (from Garmin Vector), and c) Speed/Cadence (from Tacx Neo ANT). All other devices (e.g. Wahoo configuration utility) recognize all three devices and show values; SSU randomly connects only to one or two devices, never to all three.

Thanks @NickK that is helpful. I’ll try some of these strategies out.