Running in a tunnel caused issues in the total distance computation
-
@dimitrios-kanellopoulos this option, right after syncing activity?
I’ll try to reproduce in the evening, thank you.
-
It happened today again: the distance under the tunnel was counted twice: https://www.suunto.com/move/thomas430851/61812f0036da4049ddedc17f
(I sent logs to Suunto)
-
Today was a bad day for my watch (S9P) : the tunnel was counted twice
https://www.suunto.com/move/thomas430851/619ce16e0400d73f7c48dc8c
-
Another bad day (S9P): https://maps.suunto.com/move/thomas430851/61a61fcae8d0ae379d8af479
Kilometres pace shown in the Suunto App make it clearer:
I can’t run at 0’33/km or even 1’12/km
I’ll wait for the next firmware to post here again.
-
the same as before with my watch. the tunnel length is counted twice. in wuppertal there are many tunnels on my running routes. the evaluation is hardly useful.
that seems to be a software bug and could be eliminated well 🤨
-
Hi all, we might have a fix for this on the next release. Hold on there.
-
@dimitrios-kanellopoulos Looks good after two tests with new firmware, thanks
-
The update does not result in a major improvement. Some tunnel distances are calculated correctly. Other tunnel distances are not evaluated correctly. Does it depend on tunnel length and GPS accuracy? I will verify it.
Is it possible to downgrade to firmware 2.13.18? Everything worked fine there. -
@ddausw please dont confuse posts. This was a bug fix for double distance.
Distance in tunnels can vary due to calibration and other factors
-
Hm, looks like my tunnel is stubborn one
Yesterday I ran my route again and bug has returned 
It was always 5,9km-6km, then bug arrived and route expanded to almost 6,5km, fix was at 6,2km (not perfect, but ok) and now again at 6,44km. Tunnel is around 230m in length, so running out and back 0,5km is added. I’ll test again and send logs… -
I did another test this morning (first time since a couple of months and firmware releases), and the tunnel was counted twice again
Firmware version: 2.20.30
You can find the track here: https://maps.suunto.com/move/thomas430851/6267d46cecb30d719c92f7d0
-
@tuxella Not clear on the issue here, I looked at your track. You did an out and back and went through the tunnel 2 times. correct?
-
@brad_olwin Yes, I went past the tunnel for ~250m before going back into the tunnel.
I did the same thing and illustrated it here: https://forum.suunto.com/post/80538
-
After the firmware update to 2.20.30, the tunnel distances are calculated incorrectly. It looks like the old bug (double tunnel distance) has crept back in.
Surprisingly, the tunnel distances are calculated correctly with the Bike setting.My suspicion is that the error is something related to FusedSpeed.
-
L Likarnik referenced this topic on
-
This bug is definitely there in FW 2.20.30, confirmed by my unusual ‘cave run’, as I described here: https://forum.suunto.com/post/107721
@Dimitrios-Kanellopoulos can my data help to fix it? -
I ran into the same issue today, in a shorter tunnel.
I was with a friend running with a suunto 9 peak as well, and she had the same issue.
Links to our activities:
https://maps.suunto.com/move/thomas430851/63302284911a6a6cd8036306
https://maps.suunto.com/move/oliviacolle/63302566d56fb73077f414e4Let’s hope the next firmware fixes this.
-
@tuxella thanks I’ll report this today, hope that from your activities they can fix it.
-
@isazi I have an example with 2km in a cave counted twice, hopefully it can also help: https://maps.suunto.com/move/halajos/63132dce955dae0f3a247721
-
@halajos what I can share is that the developers at Suunto are looking into this and plan to fix the issue. Unfortunately the next firmware release is already closed (and it is very close), so this will have to wait until the one after. I will keep you posted with information, if I get updates.
-
Hello,
It is something new about tunnel issue. I have a short tunnel (280 m) but the same issue. In the tunnel my pace on S9 is like KipchogeWhen the new version it will be released.
Thanks, Jaka.
