Suunto Vertical is here

[netsrak]

Received mine yesterday too. Solar version with black band. Beautiful watch.
Installed the latest firmware and downloaded my map. Smallest version for Lower Saxony (Germany) is almost 800 MB, so it took quite a while.

I have a question regarding the backlight. It appears quite uneven on my watch. Especially at ‘4 o’clock’ is a very noticeable shadow if the background colour is white.

Is it just mine or do they all look like this?

[zhang965]

@renton82 said in Suunto Vertical is here:

I have a question: isn’t possible to disable backlight completely? During the day is useless…

Setting>general>backlight
Turn off all

[freeheeler]

@renton82
you can switch off raise to wake.
by the way: I found it to be too reactive and noticed that setting it to “low” reduces the sensitivity of lighting up

[renton82]

@freeheeler Ok, i have set it as you said, but i would have preferred an option to turn off backlight completely…

[surfboomerang]

@freeheeler I agree, it’s way more sensitive then the S9P. Maybe even too sensitive. I even noticed the backlight came on even in full sunlight.
Isn’t the light sensor suppose to prevent that?

[isazi]

@dombo send me a PM if you have not contacted anyone else already.

[Likarnik]

@freeheeler there is no ‘Exercise only’ option anymore or am I missing something? I used this on my S9P as I do not need to light up screen in watch only mode…

[surfboomerang]

@Likarnik I think a lot has changed here. I also missed the “Adaptive” option for standby-light.

[Likarnik]

@Tieutieu do you have iOS? For me on Android (beta) it shows watch name:

[Egika]

@Likarnik Vertical clearly made you faster

[freeheeler]

@renton82
if you toggle off standby and select off in raise to wake, there shouldn’t be any light anymore, no?

[surfboomerang]

@renton82 Also make sure backlight setting is off if you scroll down from the watch face

[Egika]

@freeheeler I think there is no way to switch off the light that comes on when pushing the buttons on the watch…

[renton82]

@Egika said in Suunto Vertical is here:

@freeheeler I think there is no way to switch off the light that comes on when pushing the buttons on the watch…

It’s exactly what i mean.

[freeheeler]

@renton82
@Egika
ok I didn’t catch that. was this possible with previous models? I can’t remember to be honest

[Tieutieu]

@Likarnik yes I’m on iOS => just ckecked again. Name watch is not displayed. Not a big deal a guess it will be correct in a next update of SA.
But I will try again this afternoon and see if it is linked to the fact that I was on flight mode when I synchronised yesterday.

[isazi]

@Likarnik @surfboomerang the backlight settings have been heavily modified, new UI watches will have a different behavior than old UI watches.

[Tieutieu]

@isazi said in Suunto Vertical is here:

@Likarnik @surfboomerang the backlight settings have been heavily modified, new UI watches will have a different behavior than old UI watches.

I find that it works very well !!

[isazi]

@Tieutieu my configuration (tested for few months now) is:

• Brightness: low
• Standby: off
• Raise to wake: low

Battery consumption is minimal, and it is bright enough when needed.

[A Former User]

@Tieutieu no it’s not there. I have noticed and asked the same yesterday. (I’m on iOS too) I hope it’ll be added in the next update. Not a big deal but nice to have.