Software Update 2.44.46 (2025 Q3)

borgelkranz

@borgelkranz Turned out that the unnamed sensor was my Fazua Ride 60.

When entering the Sport mode, the Race showed a green overlay that told me that the Sensor is connected. But neither speed nor cadence were transmitted during the workout.

So I removed the Sensor and paired it again. Interestingly it now has a different name…

I am curious what happens when cycling home from work…

Edit:
Rode home. Race reported sensor as being connected but did not receive data. I am really unhappy with the way sensor support was changed. 🤬

ggrego

Hello since the last update my guides no longer indicate the steps but only the repetitions?

brechtvb

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

JonasLarsson

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

Brad_Olwin

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

Tieutieu

@JonasLarsson I had battery drain on my SV after update. After first charge cycle like every time after update, it’s back to normal, and even more : it drains slower than before.
l

JonasLarsson

@Brad_Olwin said in Software Update 2.44.46 (2025 Q3):

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

I’ve done charge cycle, still 10 % per day.

JonasLarsson

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@Brad_Olwin said in Software Update 2.44.46 (2025 Q3):

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

I’ve done charge cycle, still 10 % per day.

Correction: 13 % battery drain last 10h.

Tieutieu

@orzechszek indeed, even if special zones for running are off, auto tag is still wrong.
Also I had not checked properly but my HR zones had been reseted after update

This activity was tagged has Vo2max (I was wearing chest strap) :

Miroslava

@Tieutieu i have no problem today i was run z2 slow run and tag is good aerobic

larrybbaker

@JonasLarsson I am not seeing the battery drain with the last update. I just recharged it today and will try and see if I can track it a little closer.

kriskus

@borgelkranz I wish we also had the Vertical watchface fixed: with color accents in the top part just like it was when the watch was initially released.

JonasLarsson

@larrybbaker

Thanks. It’s frustrating but I can handle it

orzechszek

@Tieutieu Thanks, I hope it will be covered.

safari

@kriskus
My dream is to modify the Race 2 interface and add three or four complications to the top instead of the graphics at the bottom. The calendar is great, as I wanted, and the large clock fonts are great, but the graphics on the main screen are unnecessary. The main screen should function as a dashboard. But for me, Athletics is still number one, and Race 2 has moved into second place.

loopylou72

Repaired my sensors after the update but now have to re-pair every single time I use my watch (Vertical) as when I start a new activity the sensor is not paired (HR monitor, Stryd) - why is this? Super annoying! HR senor shows under connected devices but it is not connected - the heart icon shows wrist HR not monitor so I have to unpair and repair which takes ages because it has trouble finding the HR mnonitor again. Basially the connecting monitors function is not working.

Also where can I select to NOT use auto calibrate for my Stryd - this option seems to have gone.

Wish I had not installed this update

JonasLarsson

@loopylou72 said in Software Update 2.44.46 (2025 Q3):

Repaired my sensors after the update but now have to re-pair every single time I use my watch (Vertical) as when I start a new activity the sensor is not paired (HR monitor, Stryd) - why is this? Super annoying! HR senor shows under connected devices but it is not connected - the heart icon shows wrist HR not monitor so I have to unpair and repair which takes ages because it has trouble finding the HR mnonitor again. Basially the connecting monitors function is not working.

Also where can I select to NOT use auto calibrate for my Stryd - this option seems to have gone.

Wish I had not installed this update

I’m not sure this will help but try to disconnect them and reconnect in different order. It helped for me.

sky-runner

@pavel.samokha I posted a description of what I consider a climb guidance 2.0 bug in a separate thread here:
https://forum.suunto.com/topic/13601/climb-guidance-2.0-issue-not-all-zoom-levels-are-available-at-the-end-of-the-route-see-picture

Mattg576

@Tieutieu @orzechszek
Likewise, default zones now being used (that appear correct in the watch) & TSShr selected for all future activities but last nights run was tagged as VO2max again when it should have been Aerobic/Anaerobic.

I might un-install/re-install the app to see if that helps as not sure what else I can do & others report no issues…

Stefan Kersting

Have battery drain too on my SV. Charged sunday evening and have now (wed 10.37 am) 72 % left. Did a workout of 1 hour.