Software Update 2.44.46 (2025 Q3)

Brad_Olwin

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

Tieutieu

@JonasLarsson I had battery drain on my SV after update. After first charge cycle like every time after update, it’s back to normal, and even more : it drains slower than before.
l

JonasLarsson

@Brad_Olwin said in Software Update 2.44.46 (2025 Q3):

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

I’ve done charge cycle, still 10 % per day.

JonasLarsson

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@Brad_Olwin said in Software Update 2.44.46 (2025 Q3):

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

I’ve done charge cycle, still 10 % per day.

Correction: 13 % battery drain last 10h.

Tieutieu

@orzechszek indeed, even if special zones for running are off, auto tag is still wrong.
Also I had not checked properly but my HR zones had been reseted after update

This activity was tagged has Vo2max (I was wearing chest strap) :

Miroslava

@Tieutieu i have no problem today i was run z2 slow run and tag is good aerobic

larrybbaker

@JonasLarsson I am not seeing the battery drain with the last update. I just recharged it today and will try and see if I can track it a little closer.

kriskus

@borgelkranz I wish we also had the Vertical watchface fixed: with color accents in the top part just like it was when the watch was initially released.

JonasLarsson

@larrybbaker

Thanks. It’s frustrating but I can handle it

orzechszek

@Tieutieu Thanks, I hope it will be covered.

safari

@kriskus
My dream is to modify the Race 2 interface and add three or four complications to the top instead of the graphics at the bottom. The calendar is great, as I wanted, and the large clock fonts are great, but the graphics on the main screen are unnecessary. The main screen should function as a dashboard. But for me, Athletics is still number one, and Race 2 has moved into second place.

loopylou72

Repaired my sensors after the update but now have to re-pair every single time I use my watch (Vertical) as when I start a new activity the sensor is not paired (HR monitor, Stryd) - why is this? Super annoying! HR senor shows under connected devices but it is not connected - the heart icon shows wrist HR not monitor so I have to unpair and repair which takes ages because it has trouble finding the HR mnonitor again. Basially the connecting monitors function is not working.

Also where can I select to NOT use auto calibrate for my Stryd - this option seems to have gone.

Wish I had not installed this update

JonasLarsson

@loopylou72 said in Software Update 2.44.46 (2025 Q3):

Repaired my sensors after the update but now have to re-pair every single time I use my watch (Vertical) as when I start a new activity the sensor is not paired (HR monitor, Stryd) - why is this? Super annoying! HR senor shows under connected devices but it is not connected - the heart icon shows wrist HR not monitor so I have to unpair and repair which takes ages because it has trouble finding the HR mnonitor again. Basially the connecting monitors function is not working.

Also where can I select to NOT use auto calibrate for my Stryd - this option seems to have gone.

Wish I had not installed this update

I’m not sure this will help but try to disconnect them and reconnect in different order. It helped for me.

sky-runner

@pavel.samokha I posted a description of what I consider a climb guidance 2.0 bug in a separate thread here:
https://forum.suunto.com/topic/13601/climb-guidance-2.0-issue-not-all-zoom-levels-are-available-at-the-end-of-the-route-see-picture

Mattg576

@Tieutieu @orzechszek
Likewise, default zones now being used (that appear correct in the watch) & TSShr selected for all future activities but last nights run was tagged as VO2max again when it should have been Aerobic/Anaerobic.

I might un-install/re-install the app to see if that helps as not sure what else I can do & others report no issues…

Stefan Kersting

Have battery drain too on my SV. Charged sunday evening and have now (wed 10.37 am) 72 % left. Did a workout of 1 hour.

soisan

@Mattg576 You should just correct your power and pace zones. Check the pace and power zones diagrams of your activity in the app and compare them with your heart zones one. I bet they don’t match at all.

helgonet12

Does any one else facing that after the latest firmware the Zone sense do not work any more. On the previous firmware it worked for me everything. I have not change any thing. At the moment I’m using Race 2 but it does not work on vertical either.

brechtvb

@Stefan-Kerstin

Rebooted, charged 100% at 22:00 yesterday

No sport activity, always on (screensaver), hr monitoring on, sleep monitoring on

Currently at 90% after 21 hours

Stavrogin

I wrote a long post in the Race S area but have received zero replies. Usually if someone is having issues that others are not having they will at least say as much. I am going to copy and paste it here to see if I can get any help or suggestions. I made a couple edits to save time. Sorry it is so long.

TL;DR
Experiencing persistent heart rate sensor (HRM) connectivity issues, unreliable climb guidance, and problematic sleep tracking on Race S after recent software updates. Looking for confirmation from other users and troubleshooting advice.

I thought a lot about whether to write this or not. I have loved my Race S and it has done a great job 85% of the time. I am noticing little quirks that my COROS either does not have or cannot have due to the fact it does not have Ciimb Guidance.

Issues with having more than one HRM available to the watch.
Since updating to the new software version my Garmin HRM Pro +. It has been really bad at keeping connected.

If other Bluetooth devices (like a Garmin watch or my phone) are nearby, the Race S connects/disconnects from the HRM erratically, impacting Zone Sense reliability.

During a recent run, the HRM stayed “connected,” but produced a flat, incorrect HR trace for 28 minutes before suddenly recognizing Zone Sense.

The watch will randomly connect to HRMs even when not doing an activity.
Having multiple HRMs on the watch seems to swap mid-activity, causing further instability. Not sure if this is because I am using the HRM Pro +

Turn by Turn Guidance and Climb Guidance Issues:

Today during a hike with 2400 ft of climbing the climb guidance would not show were I was in the picture (it shades blue to show progress). The only way it would work is if I scrolled down to the second climb guidance screen and back. This happened over and over.

Also it announced the first climb, but it never showed up in the guidance. It was red in the graph, but…nothing.

As I approached the second peak I stopped short of the summit of the planned route by about 20-30 feet. There were a ton of people and I did not want to deal with it all so I started to head to the third peak. Because I did not “stay on the route” this cancelled any turn by turn navigation and climb guidance from there on out. It all disappeared.

There was cell signal so I stopped and did a replan of the rest of the route. This worked and the watch started working correctly. Shading in the climbs was also correct now. However about 30 minutes in I could not leave the navigation screen. It got stuck. I had to reload the route again to get it to go back to normal.

Sleep Tracking & Recovery Data

Sleep tracking is crucial for recovery metrics and HRV, but the Race S’s implementation is unreliable:

Initial sleep tracking only worked if worn in a non-standard way (inside right wrist after months of experimentation)

Recent “improvements” appear to have broken this function again, with frequent missed HRV readings.

When use competing platforms (Garmin, COROS, Whoop, Oura) I rarely have sleep tracking failures.

Are other people seeing little bugs like these?

Thoughts?