Software Update 2.44.46 (2025 Q3)

JonasLarsson

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

Brad_Olwin

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

Tieutieu

@JonasLarsson I had battery drain on my SV after update. After first charge cycle like every time after update, it’s back to normal, and even more : it drains slower than before.
l

JonasLarsson

@Brad_Olwin said in Software Update 2.44.46 (2025 Q3):

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

I’ve done charge cycle, still 10 % per day.

JonasLarsson

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@Brad_Olwin said in Software Update 2.44.46 (2025 Q3):

@JonasLarsson said in Software Update 2.44.46 (2025 Q3):

@brechtvb said in Software Update 2.44.46 (2025 Q3):

@Theo-Lakerveld @Chris_Dx

I also see serious battery drain since the update.

Same here. We need an update (or a new Vertical…)

My Vertical is not having battery drain, seems fine. Wait for a charge cycle, you can leave the GPS on to drain through a charge cycle faster.

I’ve done charge cycle, still 10 % per day.

Correction: 13 % battery drain last 10h.

Tieutieu

@orzechszek indeed, even if special zones for running are off, auto tag is still wrong.
Also I had not checked properly but my HR zones had been reseted after update

This activity was tagged has Vo2max (I was wearing chest strap) :

Miroslava

@Tieutieu i have no problem today i was run z2 slow run and tag is good aerobic

larrybbaker

@JonasLarsson I am not seeing the battery drain with the last update. I just recharged it today and will try and see if I can track it a little closer.

kriskus

@borgelkranz I wish we also had the Vertical watchface fixed: with color accents in the top part just like it was when the watch was initially released.

JonasLarsson

@larrybbaker

Thanks. It’s frustrating but I can handle it

orzechszek

@Tieutieu Thanks, I hope it will be covered.

safari

@kriskus
My dream is to modify the Race 2 interface and add three or four complications to the top instead of the graphics at the bottom. The calendar is great, as I wanted, and the large clock fonts are great, but the graphics on the main screen are unnecessary. The main screen should function as a dashboard. But for me, Athletics is still number one, and Race 2 has moved into second place.

loopylou72

Repaired my sensors after the update but now have to re-pair every single time I use my watch (Vertical) as when I start a new activity the sensor is not paired (HR monitor, Stryd) - why is this? Super annoying! HR senor shows under connected devices but it is not connected - the heart icon shows wrist HR not monitor so I have to unpair and repair which takes ages because it has trouble finding the HR mnonitor again. Basially the connecting monitors function is not working.

Also where can I select to NOT use auto calibrate for my Stryd - this option seems to have gone.

Wish I had not installed this update

JonasLarsson

@loopylou72 said in Software Update 2.44.46 (2025 Q3):

Repaired my sensors after the update but now have to re-pair every single time I use my watch (Vertical) as when I start a new activity the sensor is not paired (HR monitor, Stryd) - why is this? Super annoying! HR senor shows under connected devices but it is not connected - the heart icon shows wrist HR not monitor so I have to unpair and repair which takes ages because it has trouble finding the HR mnonitor again. Basially the connecting monitors function is not working.

Also where can I select to NOT use auto calibrate for my Stryd - this option seems to have gone.

Wish I had not installed this update

I’m not sure this will help but try to disconnect them and reconnect in different order. It helped for me.

sky-runner

@pavel.samokha I posted a description of what I consider a climb guidance 2.0 bug in a separate thread here:
https://forum.suunto.com/topic/13601/climb-guidance-2.0-issue-not-all-zoom-levels-are-available-at-the-end-of-the-route-see-picture

Mattg576

@Tieutieu @orzechszek
Likewise, default zones now being used (that appear correct in the watch) & TSShr selected for all future activities but last nights run was tagged as VO2max again when it should have been Aerobic/Anaerobic.

I might un-install/re-install the app to see if that helps as not sure what else I can do & others report no issues…

Stefan Kersting

Have battery drain too on my SV. Charged sunday evening and have now (wed 10.37 am) 72 % left. Did a workout of 1 hour.

soisan

@Mattg576 You should just correct your power and pace zones. Check the pace and power zones diagrams of your activity in the app and compare them with your heart zones one. I bet they don’t match at all.

helgonet12

Does any one else facing that after the latest firmware the Zone sense do not work any more. On the previous firmware it worked for me everything. I have not change any thing. At the moment I’m using Race 2 but it does not work on vertical either.

brechtvb

@Stefan-Kerstin

Rebooted, charged 100% at 22:00 yesterday

No sport activity, always on (screensaver), hr monitoring on, sleep monitoring on

Currently at 90% after 21 hours