Software Update 2.40.38 (2025 Q1)
-
@Jeffrey-Tillack
Also my Race is much better than Garmin F7Pro, which was counting steps while tooth cleaning, ironing, etc… -
Guys, relax. Suunto plays on the safe side. This time - a day before the public release, next time - a week before. Remain calm, no need to rush
S9PP 2.40.38
-
My Vertical is now much faster when scrolling through the settings. Great job!
-
@Stefano-M64 said in Software Update 2.40.38 (2025 Q1):
@Stefano-M64 Got the of Route Warning Yesterday quite quickly just about 20m after missing a turnpoint by decision. This was on the 9PP. Maybe it comes a bit late.
mmm, I’ll give a try again in the afternoon, thanks
First try of going off-route (at ca 90 degrees; perpendicular) with my Race S, nothing happened for a long time. It felt like an eternity so I returned, thinking you were right about this being a bug. Afterwards I can now see that I was 90 metres from the route. Second try, also going 90 degrees off-route, I had switched to a data screen showing running distance. The warning about being off-course came at exactly 100 metres (in this scenario).
Regarding the Turn-by-Turn prompts: Setting the Map display at 25 metres I could see, on the watch, that the turn prompt indeed was initiated at 20 metres. But in the physical world my body then already was ca 5 to 10 metres from the turn - this while running at 6:30/km to 7:15/km on gravel roads, trail and technical trail (Avg NGP 6:31/km). Even with this slow pace it felt as quite abrupt turn reminders.
SuuntoPlus ZoneSense App has been updated 2025-03-20 and now are not blocked while running a second S+ app (tried with TrainingPeaks - Run) AND following a route at the same time. Previously this made ZS display ‘waiting for data’ until the second S+ app was disabled.
-
Hi,
after the update, the accentuated color doesn’t seems to work on some of the watchfaces, it remains white.
-
@Jeffrey-Tillack my wife’s Race S doesn’t count around 80% of her steps, if we go out together on a walk and I make 10,000 steps in my Race, she only gets around 2500/3000 on her Race S.
We have already tried switching watches and the result is the same, Race S undercount most of the steps
-
@sartoric I hope there are many people who test the firmware, but looking back the last month I would say, they didn‘t test enough
-
@Łukasz-Szmigiel The update has already been rolled out to everyone, at least from the number of phone calls I receive.
-
Any information about when the new watch faces will be available?
-
Here is my quick feedback after just coming back from a 44km road bike ride :
- even if i’m a reaaaallllly fast rider, the 20 meters turn notification was useless at every turning point. It arrives to late ; I was already turning whe the alert was diplayed
- no more full screen alert might be a good idea, but I missed it
I would have rather kept the full screen notification (unless when two turning point would be distanced from less than 100m) and have a reminder maybe for bike 50 or 40m before turn instead of those 20meters.
For the rest, watch works flowly !
Let’s test further, with trail running when my ankle will be back -
@Tieutieu said in Software Update 2.40.38 (2025 Q1):
the 20 meters turn notification was useless at every turning point. It arrives to late
Exactly! Looks like most of us agree that a single notification at 20m just isn’t enough for anything over a walking speed. I thought for sure that the omission of the initial ~100m notification was a bug or mistake, but, according to this chart, it is as intended.
It feels like Suunto is trying to reinvent something that doesn’t need reinventing. Just copy what everyone else does and give us two turn notifications: one at enough distance to give us a heads up and one at the turn as a reminder.
Vertical Ti
-
I haven’t installed this update yet, so I haven’t been able to test the new TBT mode.
But doing the math:
· Running at approximately 5 min/km, the turn notification (20-25 m before) should appear about 6-7 seconds before the turn.
· Riding MTB at approximately 20 km/h, the turn notification (20-25 m before) should appear about 4-5 seconds before the turn.
· Fasteners, at approximately 30 km/h, the notification would appear just 3 seconds before the turn.
Suunto 9 Peak Pro (all black version)
-
@enriqueescoms
And if you ride with a higher speed, the notification will appear after you take the turn
Suunto Race
Polar H10
Iphone 14 Pro
Suunto 9 Baro [sold] -
@enriqueescoms said in Software Update 2.40.38 (2025 Q1):
I haven’t installed this update yet, so I haven’t been able to test the new TBT mode.
But doing the math:
a “perfect” implementation would require to compute the average speed in order to show the notification with a given time interval (e.g. 10s) before the turn, instead of a given distance (e.g. 20m)
Suunto Vector . Vector HR . Core . Race & Race S
-
@Clément-Lavabre
OMG! That´s exactly one of the reasons why I left the Garmin and buy Suunto. And now, first update, bugs in beta and after few hours we got release to everyone.
But OK, this is just small BUG. Hope it will be better next time and longer time for beta testing. I like my Race, instead of F7Pro which I sent back for warranty. -
@Jan-Suchánek like you said it a small “bug”. So far, with 3 watches updated and few testing, this update seem quit stable. Let’s test the improvements !
-
@enriqueescoms Thanks for the maths
. I’ve done two running activities with the new TbT and the reality is the notifications are nearly worthless even at slow trail running speeds. The 20m distance is dependent on the accuracy of the watch’s GNSS (which is still crazy good) and the accuracy of the route. The watch could be 5-10m off at times (rarer these days) and routes and trail maps can be even farther off in places. In such scenarios, that baked-in 20m threshold is useless.@Stefano-M64 said in Software Update 2.40.38 (2025 Q1):
a “perfect” implementation would require to compute the average speed in order to show the notification with a given time interval (e.g. 10s) before the turn, instead of a given distance (e.g. 20m)
This is the way.
Vertical Ti
-
Hello,
After Update to 2.40.38 I can’t enable Wi-Fi on my Race S, both from phone or watch, so I can’t download offline maps.
Is there anyone who has the same problem? -
After analyse of my lunch ride, the « small elevation peaks » that I’ve been experimenting since few weeks, due to wind probably, are still there. (I didn’t had such things the past months).
Here are 3 sections where it was either pure uphill or downhill.
-
A note on readability - the timer displayed (if it is running) when activating the screen is definitely smaller than it used to be. I can’t recall if it had the little white vertical line next to it before, but it’s now more in line with the barometric pressure font size, albeit harder to read. I’d also suggest that it has shifted a few too many pixels up in this version of the K14 watch face, it’s notably a jump up a few pixels from the usual complication there, or at least appears that way due to the small timer signal above it.
