Software update 2.13.18 for S series (S3,S5,S9)

[Brad_Olwin]

@zrumlow said in Software update 2.13.18 for S series (S3,S5,S9):

@stromdiddily I’ve had this happen the first run after almost every update. It doesn’t recurr though. There must be some sort of bug in the software. It won’t be a problem going forward, unless it is.

It is not a bug, it takes 15 min or so for the GPS update data to populate appropriately in the watch. So make sure AGPS is updated and don’t outdoor exercise immediately after the update.

[stromdiddily]

@Brad_Olwin our definitions of immediate are different apparently but point taken to wait longer next time

[isazi]

@stromdiddily I had no issues getting a fix after the update, but between the update and me going outside hours passed. If you go into the About menu you can see if the agps is still being unpacked.

[Brad_Olwin]

@stromdiddily I am not sure how long it takes but this came up before and Dimitrios stated it can take 15 min or maybe a bit more for the AGPS data to be unpacked and utilized. Someone who knows better can correct me.

[surfboomerang]

@stromdiddily Same here, after the firmware update I noticed the '“In Progress” text under AGPS in the About menu. After a while, it changed to the date of that day. When I started an activity a couple of hours later, I had instant GPS fix.

[pacos]

Hello
“ Fix increased power consumption when in endurance or ultra mode and at the altitude chart screen (navigating)” could you explain this please? Not too clear for me. Thanks!

[Brad_Olwin]

@pacos It means when you are in ultra or endurance mode, and have a route loaded, best GPS fix will activate only when you are on the route screen or altitude profile screen. So if you use those modes, you do not want to leave the watch on either of those screens, but use them only when you need them. In Performance mode it does not matter.

[pacos]

@Brad_Olwin ok, very clear, that is great! Thanks

[Dimitrios Kanellopoulos]

@Brad_Olwin said in Software update 2.13.18 for S series (S3,S5,S9):

or altitude profile screen.

We fixed that @Brad_Olwin ( I triple checked) .

So now also at the altitude screen it will retain it’s endurance or Ultra settings.

Only in Navigation / breadcrumb screen will it go to full power mode.

[Brad_Olwin]

@Dimitrios-Kanellopoulos Thanks, did not know that, super

[lexterm77]

I don’t what magic sauce was put into Sony FW but my tracks are as good as they can get now, and that is GPS only. I do not use BeiDou as every time I set route on it, it notifies me every minute that I am off route then back on route then on route again. I will give it a try next time I do a trail run where half of the sky is obscured by a river dam.

[surfboomerang]

@lexterm77 I can agree. I use GPS+GLONASS at the moment and last track I recorded I could even distinguish on which side of the road I was running and where I changed sides.

[Mff73]

@surfboomerang
And do you remember passing near those people ?

[surfboomerang]

@Mff73

[stromdiddily]

@lexterm77 thirded - tracks, instant pacing, and distance have been pretty stellar. Now hopefully they remain that way

[lexterm77]

There is one thing that remains unrealistic.

My running effectivenes seems to be out of wack by a lot.

[pacos]

@Dimitrios-Kanellopoulos this is great, you anticipated this a while ago… guess like me, many ultratrail runners use at most the altitude navigation, so we can use at full the endurance mode!
I am thinking Suunto should describe better this on the fix/enhancements as it’s valuable.
Thanks

[stromdiddily]

@lexterm77 I haven’t found that useful with any of the watches listed in my signature tbh

[lexterm77]

@stromdiddily

It keeps going up for some reason

[stromdiddily]

@lexterm77 well that’s positive news I guess lol