Software update 2.39.20 (2024 Q4)
-
@BrunoH I also had the same - initially after updating it looked as many here did, but a couple of hours later, it was fine. Hey ho.
-
@BrunoH It is broken again after a power off/on
Can you please confirm it is not broken anymore even after restarting the watch? Thanks for your help.Suunto Vertical
Suunto Traverse -
@pavel-samokha …installed it this morning, got the Christmas watchface… And it immediately crashed already two times on that watch face.
I couldn’t see it, but two times today already, the watchface switched back to the default watch face… And: when you enter watch faces in the store, it locks and says it’s syncing… Every single time I go to a watch face.
I restarted the device, it happened again.
Seems the quality is not where it should be.
-
@supergroover said in Software update 2.39.20 (2024 Q4):
@Francesco-Pagano said in Software update 2.39.20 (2024 Q4):
@dulko79 I updated my S9PP yesterday and I had no sleep tracked last night. The OHR was off when I took it off my wrist this morning. Both settings were on, though.
OHR turned back on after soft reset.Also, I had an alarm set at 06:00 and it rang at 06:30
After update OHR stopped after one or two hours. After soft reset it works again for that time and stops again reproducable. Never had issues with OHR before.
Exactly the same happened to me on my Race S. I realised this morning after not receiving my sleep metrics. The watch didn’t track sleep and wasn’t updating my resources.
After soft reset, the OHR appeared to be working again. But after a couple of hours it stopped again. I’ve manually turned it off and on again, OHR is working now let’s see for how long!I hope we can get a bugfix soon; it’s rather annoying
-
@pavel-samokha and here is another REALLY REALLY annoying fact: this night at 2 o’clock I woke up with my watch illuminated so bright, it woke me up.
It asked with bright screen whether it should install the update now… Grrrr!!
My Race is in DND mode every night, but WHY om earth would it be allowed to do this stupid thing?!?
I had a similar issue a few weeks ago with a storm alert and a bright, yellow screen… Also in the middle of the night - waking me up.
Could you please change the firmware to really do not disturb if it shouldn’t? Thanks!
-
@Dario-Lemos said in Software update 2.39.20 (2024 Q4):
@supergroover said in Software update 2.39.20 (2024 Q4):
@Francesco-Pagano said in Software update 2.39.20 (2024 Q4):
@dulko79 I updated my S9PP yesterday and I had no sleep tracked last night. The OHR was off when I took it off my wrist this morning. Both settings were on, though.
OHR turned back on after soft reset.Also, I had an alarm set at 06:00 and it rang at 06:30
After update OHR stopped after one or two hours. After soft reset it works again for that time and stops again reproducable. Never had issues with OHR before.
Exactly the same happened to me on my Race S. I realised this morning after not receiving my sleep metrics. The watch didn’t track sleep and wasn’t updating my resources.
After soft reset, the OHR appeared to be working again. But after a couple of hours it stopped again. I’ve manually turned it off and on again, OHR is working now let’s see for how long!I hope we can get a bugfix soon; it’s rather annoying
I have a question for the others with the OHR disconnecting problem. Did you have the new Christmas face in the watch when that happened?
That’s the only thing that changed yesterday that might explain this situation.
My routine was:
8am - updated the watch
10 am - did a 52 minute workout (all great)
1pm - took a shower, the OHR blinded me as usual when I took my watch off
~6pm - changed the watch face to the Christmas tree one
Today at 7:15am - no daily sleep update, OHR was off
12pm - soft reset, OHR back to work
~3:30pm - I realised OHR wasn’t working again, manually turned it off and on again; I also changed the watch face to the one I previously hadI’ll keep you posted!
-
@Olaf-Gottschalk said in Software update 2.39.20 (2024 Q4):
@pavel-samokha …installed it this morning, got the Christmas watchface… And it immediately crashed already two times on that watch face.
sad to hear and not expected ofc, could you send logs and remind me in DM your username?
-
OHR problem is known and is being investigated
-
@pavel-samokha Great, thanks for the info!
-
@gerasimos i think he refers to his apple watch ultra?
-
@Francesco-Pagano Same problem. OHR stopped working again today during the day. I’m not sure but on 12:00? After turning the watch off and on again it works normally. Compas does not calibrate itself automatically. So if this update should improve sleep tracking it failed totally for me. I will see next morning. If OHR stop again I will try to find how to get old FW back. Christmas tree is on training device the most important thing…
-
@Dimitrios-Kanellopoulos @pavel-samokha For all those experiencing issues with OHR, I updated my 9PP and wore it sleeping as well as during the day. No gaps or interruptions of OHR. I will keep wearing and testing.
After about 24h of recording my OHR stopped as well. I filed a bug report with Suunto and sent my logs. Occurred with a 9PP.
-
@Dario-Lemos I use Christmas tree watchface.
But if I remember correctly, 1st time yesterday when OHR stopped working, I had another watchface (from Race). So I don’t think it depends on it.
-
@pavel-samokha Good evening, I’m sorry to write off topic, but can you pass on to the developers of the suunto program the following problem, the previous version on android 14 phone oscal s80, the problem is that after updating the program the phone is overloaded when I enter the program. I noticed how I give some permission to the watch in the program, the phone is overloaded when I enter the program, before I reset to factory settings, and then put the program and so on.
-
@Александр-Даниленко Yeah, I guess it’s implausible. It’s probably impossible that it’s related.
I was just curious
-
since my last update, the watch RACE seems to be loosing connection with the phone app.
also, the phone notification flashes too fast to be read, and you have to got to the notification in the watch.
before the update, the notification lasted longer.
another thing, during the sleep, the watch stopped measuring HR, and after restarting the watch several time, he started measuring HR again. -
@dzembronja said in Software update 2.39.20 (2024 Q4):
Good evening, I’m sorry to write off topic, but can you pass on to the developers of the suunto program the following problem, the previous version on android 14 phone oscal s80, the problem is that after updating the program the phone is overloaded when I enter the program. I noticed how I give some permission to the watch in the program, the phone is overloaded when I enter the program, before I reset to fa
Do you mean that you open Suunto App on your Android 14 phone and it reboots?
-
@pavel-samokha Sorry, I wrote the wrong version of android 12 phone oscal s80, the program works fine on android 11 of another smartphone, but I use oscal s80
-
@dzembronja maybe better to do this in a separate thread. This one is about watch FW update.
Thx -
@dzembronja When I delete the program, the smartphone does not overload itself, in my opinion, when I give permission to some program, it terminates the program or overloads the smartphone, it was in the previous version of the suunto program
