Hiking with battery mode Ultra
-
@surfboomerang More of a discussion. For now, I think what I stated is correct but I should eventually have more information. If you want to use Endurance or Ultra mode at this time with a route loaded I recommend no ETE/ETA fields in custom sport modes or any distance to waypoint fields. Then, Best GPS should only be active when on route Navigation and Good GPS on other screens including the altitude profile screen. Keep bugging me about this and I will check into it. I will also be doing my own testing on long runs over the next two to three weeks.
Vector/T6c/Ambit 3 Peak/S5 Copper/S3/S7 Ti/S9 baro Ti/S9P Ti/S9PP Ti/Vertical Ti/Race Ti/RaceS/Ocean/Wing
-
@brad_olwin said in Hiking with battery mode Ultra:
@surfboomerang More of a discussion.
Our opinion of how it should work differs from Suunto’s opinion?
-
@brad_olwin Any news about the discussion outcome?
-
@surfboomerang Nope, I will update when I know more. I think that WP distance fields and ETE/ETA fields may like stay as implemented. Users dislike “————“ being displayed as typically one thinks something is broken. The real question is whether Best GPS fix can be off unless the user is looking at these fields in the watch face. I would prefer it this way but still awaiting information on this. For now, when a route is loaded and no fields for distance/ETE/ETA the only screen that will revert to Best fix is the route screen itself.
Vector/T6c/Ambit 3 Peak/S5 Copper/S3/S7 Ti/S9 baro Ti/S9P Ti/S9PP Ti/Vertical Ti/Race Ti/RaceS/Ocean/Wing
-
@brad_olwin Best GPS can also be off if the value is “----” even if i’m looking at these fields.
Btw, do you know how the Suunto Plus “Weather” screen influences this behaviour? This screen also takes ETA into account right?Suunto Vertical Titanium Solar
OnePlus Nord 4 -
@brad_olwin said in Hiking with battery mode Ultra:
Users dislike “————“ being displayed as typically one thinks something is broken
What do these fields actually read when Nav is inactive (but GPS is switched on by their presence)? As currently implemented, if I understand S9s correctly. Sb’s original point was that no route was loaded.
As one has to activate Navigation manually, isn’t the value-less-ness more a clear indication/reminder that the user hasn’t done so? A step not taken, rather than something broken?
The real question is whether Best GPS fix can be off unless the user is looking at these fields in the watch face. I would prefer it this way but still awaiting information on this.
Also a very valid, if different usage case.
-
@surfboomerang said in Hiking with battery mode Ultra:
@brad_olwin Best GPS can also be off if the value is “----” even if i’m looking at these fields.
Btw, do you know how the Suunto Plus “Weather” screen influences this behaviour? This screen also takes ETA into account right?Excellent point and frankly, I have not tested this since the Endurance/Ultra modes were fixed (there was a long time where this was broken in test firmware) as I need a long run and both S9s. I will soon though and I think we need long runs >3h to get good information on this. I have been hampered by snow as I am this weekend and won’t run sloppy trails when I can SkiMo fresh pow…these modes don’t work for SkiMo:)
-
@brad_olwin Just curious… any new information in the meantime?
-
@brad_olwin said in Hiking with battery mode Ultra:
@surfboomerang More of a discussion. For now, I think what I stated is correct but I should eventually have more information. If you want to use Endurance or Ultra mode at this time with a route loaded I recommend no ETE/ETA fields in custom sport modes or any distance to waypoint fields. Then, Best GPS should only be active when on route Navigation and Good GPS on other screens including the altitude profile screen. Keep bugging me about this and I will check into it. I will also be doing my own testing on long runs over the next two to three weeks.
No new information yet?
-
@surfboomerang Nope.
-
@brad_olwin I’m commenting on this from S5 user’s perspective, which shares some firmware and is related to some extent (by default not “Ultra” but “Good”, that is - 1 min fix mode). If it’s necessary - I’ll create a separate thread in S5 forum.
I went on a hike today on a route I know well so I thought I’ll go with orange mode which in S5 means no OHR and 1 min fix (Endurance in S9).
I didn’t load a route in watch. However - I have ETA on my second screen as I have only one hiking profile that I usually use with navigation and routes loaded. I have two data screens - one related purely to ETAs so if no route is loaded I simply disregard this screen and all is well.
I did notice that the watch didn’t switch to 1 min fix after initial 1 s warmup that lasts a while and it used 1 s fix for the whole activity.
Why I believe this is a problem?
- I got 20+ hours of estimated battery life (starting at ~70%) which was impossible in such conditions. After 2:48 hours of activity (GPS + Galileo) I was left with 51%.
- I didn’t get a notification while starting the activity that the watch is unable to lock on 1 minute fix despite my preference because I’m using ETA on my screens (an easy solution that would take away the confusion why the battery is dead way sooner than expected and maybe the watch is faulty - just tell the user what’s going on if it’s not obvious).
- The watch didn’t record ascent / descent as per 1 min fix mode (S5 can’t do this in other mode than 1 s fix) - but in fact the ETA field forced 1 s fix mode for the whole activity. So it kind of switched to performance but at the same time it didn’t.
The solution?
- Simplest: Just tell people what’s going on after pressing the middle (start) button when watchface configuration (ETAs) interferes with battery settings. Display a message with ability to change the setting or accept it (top / bottom button).
- Better: Same as above but make it route dependent. Let me use 1 minute fix when using ETA on screen if there’s no route loaded - it’s not used anyway, blank field not doing anything. Switch to 1 s after loading the route and display the message when loading the route (the battery life will suffer as we need more precision blah blah are you sure).
- Best: Calculate ETA with less precision? Like - this seems obvious that if navigation data is refreshed rarely then ETA calculation will be less accurate. Maybe use parts of snap to route to achieve this?
-
@łukasz-szmigiel Is Sport Mode still the first selection stage in the S5’s activity recording?
If so, how about the act of loading any Sport Mode with those Best-GPS-invoking fields disables (and greys out) the Battery Modes other than Performance?
The user will learn pretty quickly, and before they start the activity (even if they have to go back to that User Guide Note). Time to create a Sport Mode free of those fields.
Alternatively …
The Spartan lacks battery control nuance but the sequence works: pick Sport Mode -> setting “Power Saving” to “OK” disables the pre-set GLONASS option* (as well as doing the 1 fix/min thing).
So your idea of retroactive Sport Mode ET/distance quality adjustment has a kind of precedent, too. Unless Sport Modes, once saved and invoked, are pure and inviolable.
I wonder which is more difficult for Suunto: adding a warning screen vs disabling or reconfiguring a function.
(*At least I think it does: it greys out the toggle at its last setting, even if it was left ON. Can’t see that actually locking it ON makes sense as saving power.)
-
@fenr1r I simply find it absurd having to create a separate training profile - a double - with and without ETA fields just to workaround being unable to use different GPS quality modes.
I was thinking about a workaround with different modes even - with multisports functionality - to avoid loosing ETA if I start the activity with a profile without them and when the need arises during the activity by simply switching to different sports and then switching back but with a different profile (which has an ETA).
But still - this is pretty awkward.
But number one bummer to me is not knowing the issue is there. There’s a tiny info in the manual and that’s it.
In contrast - I’m bombarded with “keep moving to see direction” whenever I stop as my watch stubbornly reminds me that it lacks compass. But I’ve no idea that I won’t get 20+ hours when I need it.
-
@łukasz-szmigiel said in Hiking with battery mode Ultra:
I simply find it absurd having to create a separate training profile - a double - with and without ETA fields just to workaround being unable to use different GPS quality modes.
You’re not alone. But maybe those modes have … a “seniority” or “primacy” or whatever that is harder to override in Suunto’s FW …
-
@fenr1r I think it may be so and it’s ok - people are throwing request here and there and who’s been programming for a while knows how complex it really is.
But as I said - I think that number 1 priority is information: users should be aware what’s going on.
I see an orange GUI and notice that my estimates changed from 10 to 20 hours. I trust that this information is correct (with some inaccuracy of course). Off I go. Aaaaaaand there goes my battery half the way. In the meantime after a walk or a run I get a notification that HR readings weren’t perfect with suggestions of how to improve them next time. But there’s no indication that I won’t be able to use the battery mode of my preference due to ETA present.
-
@łukasz-szmigiel Battery collapse is indeed a nasty surprise. Totally agree on misleading info.
The thing about priority #1 is what one then does with that info. Barring a battery life>GPS quality override*, one will still need that ET-/distance-field-free Mode anyway to avoid said collapse.
If one absent-mindedly dismisses the warning: mid-activity surprise and later self-recrimination. If the option is greyed-out: one already knows one has missed something and can get the self-recrimination in earlier, before one runs out of power and/or gets out of range of the App. (Where a quick Sport Mode clone function would be useful.)
It might be even more work (and therefore less likely a FW revision than Sport Mode override) but perhaps a warning/reminder (c.f. sleep tracking & Bearing Nav instructions) AND the disabling of low-battery-consumption modes?
*Maybe asking Suunto to provide ET/distance data at a sub-optimal standard is like asking a proud chef to add salt to his/her dish? (And we should know not to.)
Plus, in some ways, Suunto’s modern house style tends towards single-process insistence and preclusion rather than customisation and user-responsibility, so disabling rather than advising may fit that better. -
@fenr1r I suspect ETA is somehow related to how route is being computed with 1s mode - that’s why it can’t be done easily with other modes - even if approximated. It may not be as simple as pace for example (which works fine with 1 min or 2 min - it’s just less accurate and refreshed less frequently).
But perhaps now that we have stick to route - parts of this algorithm could be used to determine user’s location and ETA with other modes than 1s.
Graying out fields could do or simply displaying “–”. I’d argue that battery life is priority if one decides to go with something else than default performance mode.
Regardless - I’d display a note “ETA is impossible in selected battery mode” with continue or back to workout preparation screen.
-
@łukasz-szmigiel This is known. All S series watches have this issue. Personally I think this shouldn’t happen. I do not know if it will get resolved. But if you want to use extended battery modes do not use ETE/ETA fields.
-
@brad_olwin hm isn’t it regarded as a bug to be fixed? I find it pretty hard hitting for an unsuspecting user and while it might be hard to redo entirely a warning displayed on screen pre-activity would be a good starting point and not hard to implement.
BTW. You do run ultras - do you use ETA with modes that invoke FusedTrack? How do you get around this bug?
-
@łukasz-szmigiel I do not use ETA with Ultra or Endurance modes for the reason you found. I think this is a difficult problem as users would complain a great deal if ETA/ETE was way off. It does make sense that using this switches Navigation to 1s fix, however, there should be a clear warning. I do not find ETA/ETE to be that accurate for what I do as my pace will vary greatly depending on the terrain. For example, yesterday on a 9h trail “run” 2/3 was off trail moving at a walking pace and the latter 1/3 on trail was running. The ETE/ETA would be useless and would only provide accuracy at the end of the trail run, giving me information I already know. One solution would be to disable ETE/ETA in the extended modes and show ——— in those fields.
