S9B crash during navigation.
-
I can send you the record files from SA, both times it crashed it still saved the file. Sadly, I deleted the GPX in SA I was navigating with, can you undelete in SA?
-
https://www.suunto.com/move/joejord/5fe5d50d5041ef742cb08434
https://www.suunto.com/move/joejord/5fe5d50b7b9a556a54830886
SA version 4.33.1 release (4033001) on Android. Watch was updated on the 20th to latest version.
I have uploaded original GPX, I also added POI on the route in SA. And navigated in reverse. Navigated fine up to the first crash just under 6km in. Then I just recorded the walk and tried to turn on navigation again and it crashed as soon as navigation was selected.
As a test I loaded another route in the Navigation menu of the watch and that seems OK, then tried to load the one attached again, watch crashed again and download arrow appeared and did not go until I connected to a PC back home. Suunto Link them updated and wiped all the user data and settings from watch.
-
@Audaxjoe thank you
-
@Audaxjoe you don’t need to connect to sl. Next time just hold the upper button 12s
-
@Audaxjoe the Christmas gpx doesn’t have waypoints right ?
If you manage to reload it at the watch and crash the watch please send the logs !
-
Hi guys ,
The same problem I don’t know the but 3 restart in one route of 8Km , configuration if helps to fix the issue…
Route Create with :
https://www.plotaroute.com save to gpx and upload by https://quantified- self.io/ ( Note : Use POIS of plotaroute)
Watch config : Trail running with Climb Hill Trainning , and Route navigation.
S9B Fw: 2.13.18
SA 2.0.0 (8608) -
@Dimitrios-Kanellopoulos that is the original, I then uploaded it to SA and added waypoints. It crashed just a few hundred meters past the first waypoint. The route was being reversed also.
Unfortunately, I then deleted the one in SA when I got home.
-
Guys I’ll need logs about this. The log id. So after finishing your activity , connect to suunto app or preferably suuntolink.
Connect the watch to suunto link and press send logs. Paste the log id here.
Connect the watch to suunto app. There is a menu at the watch section to send logs. I need the time you performed the send logs and your email then.
Please try to use suuntolink as it contains more data.
-
Going to try and see if I can repro.
3rd party app to create route
Waypoints added in SA after import
Reverse direction + S+ features enabled -
I send logs/registers by SA
-
No dice in getting mine to crash w the above steps
-
@omunoz email and time you did it . Pm me
-
@Dimitrios-Kanellopoulos
Where email can I send ?Thanks
-
@omunoz pm me here in the forum or Facebook
-
Saturday 26th December 26/12/2020 at 10:11
Watch and config Specs:
S9B Fw: 2.13.18
SA 2.0.0 (8608)
Route create with https://www.plotaroute.com and imported with https://quantified-self.io/ : https://api.sports-tracker.com/apiserver/v2/routes/export/R2szSmpzc093M2J5K21rTmpOT2krUXN2WGYvckNNdmZHR0V5eW4rdXhLWT0=?brand=SUUNTOAPP
Fail 1:
- Begin workout 10:11 (hour:minute)
- Track : (S9B crash during navigation) : https://www.suunto.com/move/omunoz/5fe70cfc1e158b59550ac572
- Sunto Climb Activate
- Navigation Active with route created with https://www.plotaroute.com
- GPS + QZSS
- 10:23:16 crash the workout (hour:minute:second)
Fail 2:
- Begin workout 10:38 (hour:minute)
- Track : (S9B crash during navigation) : https://www.suunto.com/move/omunoz/5fe70cfd9dc5b72d972b9fce
- Sunto Climb Activate
- Navigation Active with route created with https://www.plotaroute.com
- GPS + QZSS
- 10:43:31 crash the workout (hour:minute:second)
Correct 3 (Change the Gps options and not detect the position):
- Begin workout 10:45 (hour:minute)
- Track : (S9B no crashing detect no gps found ) :https://www.suunto.com/move/omunoz/5fe70cfb05a1bd2de8389e3c
- Sunto Climb Deactivate
- Navigation Active with route created with https://www.plotaroute.com
- GPS + QZSS + BEIDOU
- 10:47 Stop workout (hour:minute)
Correct 4 :
- Begin workout 10:51 (hour:minute)
- First use the option your location to detect quickly the position with gps.
- Track : **(S9B no crashing detect no gps found )**https://www.suunto.com/move/omunoz/5fe70d08aa9b555744cfee0d
- Sunto Climb Deactivate
- Navigation Active with route created with https://www.plotaroute.com
- GPS + QZSS + BEIDOU
- 11:09:04 Stop workout (hour:minute)
Send the logs by Suunto App 26/12/2020 at 21:00, not connect with Suuntolink.
Now today connect with Suunto Link and send the logs : 3801051312397
@Dimitrios-Kanellopoulos In my case seems that the watch hung when pass the second POI in spanish “Punto de referencia”, in the both watch hangs is with the second POI
Thanks a lot
-
Can you explain what chnages with the correct versions of the tests ? Thanks
-
Hi , the changes is not use Suunto Plus Climb and the GPS+QZSS+GLONASS to GPS+QZSS+BEIDU , but I don’t know if is a problem to use POI with external platform https://www.plotaroute.com that’s hangs or a problem with Suunto Plus Climb or GPS+QZSS+GLONASS
-
@Dimitrios-Kanellopoulos OK watch crashed again today and I managed to send the log. It was sent at 10.57 UK time.
Few similarities to last time:
location was similar.
It was the second waypoint
And I was using the 2nd best GPS performance - I hardly ever use this mode, I normally have it on best, could this cause an issue?After crash I rebooted the watch, loaded the GPX with top tracking and had no further issues.
This time I was following the route the correct way around but had left the route for around 3km, and it crashed just after joining back on the route.
-
@Audaxjoe said in S9B crash during navigation.:
And I was using the 2nd best GPS performance
Isn’t navigation always in “best” GPS mode? No matter what GPS mode you select?
-
@surfboomerang meaning if you’re on the nav screen? Think yes