Live location S+ app
-
@Nikolai-Simonov hey Nikolai
had many Breaks today with Connection! Last Version and a second bug: i import a route ITS 44km but the live App only shows 23km and ends in top of the Mountains… Whats Up? 
)
-
Hey @GiPFELKiND !
could you share .gpx of this route?
-
-
Mittenwald_Trail_ZUT_2025_fa6c0d4010(2).gpx
Thanx! I looked this track, found an issue.
TL;DR - it’s a bug in preproccesing tracks, to avoid it you should use gpx with route not a track that bypass preprocessing.
The root cause is here:
gpx format has a two tags for holding routes
<trk>and<rte><trk>- represents a saved by device route and usually contains timestamps on points, telemetry extensions etc…<rte>- represents planed route by some software.in live.τ we can use both of them, however for
<trk>we’re making some preprocessing to reduce amount of points on straight lines, collapse stops etc, it allows us save quite a lot of cpu and memory while navigating, but, you found a bug in this preprocessing, due to this route points in<trk>tag app thinking that it’s a recorded route and should be sanitized, but sanitizing faced up with issue in it’s logic trackpoint without timestamp and gap more than 100m - algorithm decides it looks like a malformed gnss data - no timestamp and speed probably more than 100m/s and cut it out.so in fix i’ll add euristic if point not contains timestamps probably it might be proceed like a route not a track…
but anyway i suggest use gpx followed standarts.
And thank you for bug report
-
@Nikolai-Simonov okay thank you! Thats the official route from UTMB Homepage from the Zugspitz Ultra Trail in 1 Week. The UTMB share this official route!
-
@GiPFELKiND yep, it could. it created via outdoor active as i see in the metadata. but frankly, not every software follows standards, so, neither good nor bad just a fact.
-
@Nikolai-Simonov what about the fact with the Break while run a Activity? I never had a complete track…suddenly the watch says Error… And did not track again. Yesterday 28km Trailrunning! Lost 3 times the Connection? End the Activity at suunto watch, start again…
-
What phone model? and what error?
also on lates android build, knowing issue if you app swiped out from activity list, you probably could lost connection, fixed but not released yet.
in general race for BTLE connection between suunto app and live.τ app still exist, but observation said that it’s not a big deal, and connection works in general well. personally i usually lost connection in some difficult areas near military objects, or radio polluted regions… not sure if it’s your case.
you can try to the latest apk build here - https://artifact.fra1.cdn.digitaloceanspaces.com/live-t/apk/1.0.18/live-t.apk
or if you use google play join internal builds here - https://play.google.com/apps/internaltest/4701596347369604163
-
Just purchased a Race 2. Updated to newest firmware. I installed LiveT on my phone (iOS) and on watch. I activated it in the run activity and was able to connect to my phone. The watch and the phone connect. Unfortunately after that my watch freezes then reboots. After watch reboot when go back to the run activity the watch freezes again. My watch looped on the “The device is being restored to a safe state” then it did a hard reset. I’m also trying to do a structured interval plan I created. Are there any know conflicts with that?
-
Hey @Tamon-Yanagimoto!
nope, never heard this behavior, is it happens if you try use Live.τ + structured workout? -
This year, I’ve already run 3 ultra races, each about 60-65 km (6-7 hours). Every time, I share my location via LiveT (Android, Pixel 8).
I ran the last one on Saturday.
On every run, after a few hours, my location stops being shared - it disconnects from the watch or something else happens. I don’t have time to figure this out while I’m running fast, so I just ignore it, but this is a major flaw for Suunto.
I use the Vertical 1.
I thought maybe it was because Android was killing the app in the background… So, as a last run, I made sure that battery saver mode was turned OFF and that the app could run in the background without any restrictions.
It didn’t help.
When I noticed that my location was no longer being shared, I opened the LiveT app on my phone and saw that the button was turned OFF.
I tapped the ON/OFF button to turn it ON, but it couldn’t connect to the watch anymore.
I think you’ll need logs from the watch or the app, but if you’re not a developer, it’ll be hard to fix this.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login