Suunto 2.50.28 hot-fix Q4
-
@Benjamin-0
Thats useful to know. My battery drains a third every day, without any activities. My watch is close to two years old so I think suunto will refuse to look at it. I’m so annoyed by this as i’ve been a suunto user for 15+years, and have never had a problem. I bought the watch to use for long Ultra races, which I now don’t feel comfortable in using. -
@Geoffwilli if its not two years old you might still be under warranty, its worth a try
-
Answearing to myself, my watch did turn off again this night, so it might not be related to alarms (none was active).
I will hard reset it -
@Geoffwilli with this latest fw I have a stable daily drain of around 10% including 30 to 60 mins of GPS activity per day - SVTiSolar which I received as a replacement last September. I have a paired Polar H10, I suspect this may be the reason.
-
My Suunto Race battery seems to be draining much faster than on the previous firmware, and it’s clearly not just me
-
@Milan-Šádek That seems a reasonable amount of drain per day. I’m experiencing around 35% drain every 24hrs with no activities on my race, so charging every other day. I have no faith in using the watch for anything over 50mile races. This is silly, as I purchased the watch for 100 miles races etc.
-
My race S also drain faster in daily use, I find myself to recharge it more often (1 day earlier ?) than before.
-
@Geoffwilli with my old unit I’d get 6–8% drain per day with an hour of GPS (sometimes even below 6%). I even remember finishing a 50km race and the watch still being at 23% ten days later.
This replacement watch started off okay at around 6–7.5% on older firmware, but now it’s jumped to 10%+ daily. It’s a huge step backward and honestly pretty frustrating. Is anyone else seeing this jump after the latest update?
-
@Milan-Šádek I don’t know which watch you have but if it’s a Race S (9 days with HR, without GPS => 11%/day) or Race 1 (13 days with HR, without GPS ==> 7-8%/day) then I think you are getting what you should expect (assuming you are NOT using AOD which reduces battery life further). No?
With my Vertical 2, latest firmware (2.50.28), I am getting 14 days with 25 hours of GPS (running, cycling) which is exactly what the V2 spec implies (21 days with HR, without GPS => 5%/day and 65 hours of best GPS => 1.5%/hour extra for GPS).
I don’t use external BT connectivity except for the Android App (on Android 16). You may get worse drain if you use external HR belts etc. -
I don’t know were you live but suunto repaired mine without any issue (race s - 1y1/2 old). In FR we have a 2y waranty.
-
@gkaempfer as mentioned earlier, I have Vertical 1 Ti Solar with Polar H10. So no AMOLED display.
-
@Milan-Šádek Have you turned off the BT discovery? I feel like that helped me a little bit.
-
Random Suunto bug hit my Race S yesterday. Put the Watch on the charger, dismissed some notifications and reseated it to get the charging screen. A couple of seconds later the Suunto logo greated me as the watch rebooted itself… Reliablity, man…
-
@Milan-Šádek said in Suunto 2.50.28 hot-fix Q4:
Is anyone else seeing this jump after the latest update?
I have the Vertical 1 Ti solar as well and paired with a Polar H9 but I don’t see this kind of battery drain. I see around 3% per day (no 24/7 HR and sleep)
-
@surfboomerang good hint, thanks. I will turn it off before charging to have a better idea about its real effect on the discharge.
-
I wanted to refer https://forum.suunto.com/post/185015
-
@Milan-Šádek said in Suunto 2.50.28 hot-fix Q4:
Is anyone else seeing this jump after the latest update?
Similar proportional jump on my SV1 after 2.50.26.
-
@Benjamin-0 Hi Benjamin. Im in the uk, which i think is only a 1 year battery warranty. My issue is that the watch has failed and is not fit for purpose. If suunto don’t respond then i’m considering taking them to court under the Consumer Rights Act 2015.
They have already offered my a 30% reduction on a replacement watch, but why should spend hundreds of pounds to get the same watch thats failed me!?
-
@Geoffwilli have you tried a hard reset in case you for some reason have ended up in a situation where the watch can’t enter power saving states?
I know it is no fun to do a hard reset but maybe worth trying instead of throwing the watch in the bin.
-
@Geoffwilli I can understand since I’ve had the same issue twice, probably there is a design issue on the battery. I don’t know if I will have battery drain again but now this is repaired and with the new HR algorithm (previous was failling measurement all the time during activites on me) I’m quite happy with my watch.
