Software Update 2.40.38 (2025 Q1)
-
@Łukasz-Szmigiel
A bit late reply - I think it’s because of the time difference.
Yes, both battery modes show me the same battery time left for training. -
@Danny-poleg generally the fix for custom battery mode being stuck as default is to recreate the desired mode (i.e. performance) as custom. The next time the default should switch if the settings match.
-
@Łukasz-Szmigiel Thanks again
I also tried aerobic training and the change is not permanent
Not bad overall, both battery modes currently give me the same battery time for training so let’s not get into the nitty gritty -
@Danny-poleg You are not alone. i already posted this problem much earlier and you can scroll down and read few more messages.
https://forum.suunto.com/post/164415my Custom mode are set same with Performance mode but still going back to Custom mode.
-
@babychai In custom sports mode I would not like at all to have performance back every time, because as it is a custom mode I expect it to stay as I set it up. But in standard mode it is weird.
-
@Ghost Yup, i understand your point. now my Custom sports mode and Standard Mode still going back to battery Custom mode. so i believe this version is a bug there. Previously i always successfully change to Performance mode become default.
Suunto Vertical Black Ruby (S/S)
S̶u̶u̶n̶t̶o̶ ̶V̶e̶r̶t̶i̶c̶a̶l̶ ̶A̶l̶l̶ ̶B̶l̶a̶c̶k̶
Suunto 9 Peak All Black
Suunto Spartan Trainer Wrist HR (Black) -
@babychai For my Vertical, this changed about two firmware versions ago. From my perspective, it’s not a bug—I actually liked the change. I configure it the way I want, and when I go somewhere that needs more precise GPS, I switch to Performance, knowing my custom settings will return for the next run. Time will tell if it’s a bug or an intentional move.
-
Talking about battery: I discharged (completely)my S9PP Tuesday evening in order to recalibrate battery after the last two updates. Now is 95% with HR 24 and sleep monitoring on. No activities in these two days. It seems to be improved…let’s see how this goes for the future!
Fun fact: the watch went over during a running sessions. Screen stayed freeze at 2% and no way to refresh it clicking the buttons. Once in charge it went back recording the activity (never stopped even if the gps track record went missed).
-
I have somewhat of an irony of a bug to report, that the Loop Pace S+ app doesn’t work with the track running sports mode. I’ll try it again but it refuses to work, even when toggled off and on again.
Oh and the mode doesn’t give an estimated VO2 max either.
-
@babychai yup, seems like a bug. I’ve just noticed in one of my sports modes that it defaults to custom, even despite it being identical to performance.
-
Today I had my vertical in battery saving and at a random occurrence it rebooted itself … after reboot it was set in non battery saving state.
Logs sent -
Well. It is happening again.
About 2,5 hours are missing. I woke up at 3:55 and pressed a button to check the time. Watch shows the correct duration, app doesn’t.
HRV is also wrong: app shows 29, watch shows 32 as last night’s HRV.
-
@pavel.samokha Hello, is this an update error? That it is impossible to set the battery mode to Performance, but there is a User mode, and changing the pressure does not affect the pressure change arrow and the same error is present
-
@timecode
Uh…thanks to your message I know that the same behavior is happening here as well…sleep time is right in the watch and wrong in the app…going to check it again tomorrow just in case the system needs a day to be aligned between devices. -
@misu763 there is a workaround to turn on “do not disturb” or turn off “bluetooth” on the phone before going to bed and vice versa when waking up, but this is so annoying to be honest. The strange thing is that it happens once in a week or so. I don’t understand this.
-
Update went smooth. No issues on Race. Sleep tracking and HRV has worked flawlessly.
-
@Ars-Vitae said in Software Update 2.40.38 (2025 Q1):
@Artus-Diver You’re right that the update did not resolve a problem. But to be fair the results have improved a bit. The pool’s lengths are now counted better. I’ve been following this problem for two years now, and I admit it’s getting better but still, if you do a strange move in the water the watch could be wrong in counting. Also keep in mind that this particular update was not intended to improve style recognition. Maybe it’ll come with the next updates, I hope so…
Yes, for me, the pool length counting improved only after sending the watch to the service in Prague.
I think that Suunto Service performed a hardware reset and after that it is better (…) I previously performed two factory resets and nothing.
The speed of the service deserves praise (4 days).
The swimming style recognition algorithm has also been changed. My friends have the same feeling.
I swim repetitively and on the previous algorithm it recognized styles more easily. The current one is very wrong.
In my opinion, the best solution would be to implement the “swimming style learning” algorithm from Suunto Ambit 3 PEAK and everyone would be happy.
-
@kackburt said in Software Update 2.40.38 (2025 Q1):
Another night past and today opening the app/widget triggered the storing of the sleep tracking again. I guess I’ll just continue opening the app/widget after waking up in the morning for the time being…
Sidenote: HR tracking during the night always works.After few days of opening the sleep app manually in the morning, sleep tracking is back to normal for me on the Race S.
-
Did I missed it in previous updates ?? For me altitude profile during an exercice starts now from the start of exercice and then displays the last hour of profile. If I’m not wrong : the altitude profile used to display the last hour even at the beginning of exercice. That was pretty annoying for exemple if there was a lot of altitude difference before the starting point. That’s a good point !
[edit : well I’ve tried again and I don’t reproduce…
]
-
@timecode
Same here with S9PP
