Software release 2.30.26

Egika

@Michaël-POINTEAU said in Software release 2.30.26:

@duffman19 I have found the menu on my trail race from Sunday. Manual (Climb) and Auto Laps but on my 10k race from previous Sunday there is no Lap Count despite I had 1km auto laps… bug…

Also no laps in Suunto App after syncing? Did you get the laps notification during the activity?

PetrMisek

@Dimitrios-Kanellopoulos thanks for info

larrybbaker

@Sergei-Ladeishchikov I believe out goes into power saving mode at that point and vibration is stopped?

larrybbaker

@Jonathan-C I do see the weekly complication in the new watch face have not tried the others.

Jonathan C

@Egika @larrybbaker thanks, needed a full reset to restore the complication. Hate to do it but seems necessary once in a while to clear out some obscure bugs.

Edit: Actually, I figured out that one can only choose between showing Weekly Training and Dual Time!

kolyany4

Found interesting glitch:

Burner (sport app), if previously selected, is not shown as selected upon re-entering into list of SuuntoPlus section.
However, if one will scroll down through the list (of sport apps) so that Burner no longer is shown on watch screen, and then will scroll back (to see Burner), then selection mark of Burner app would be shown as expected.

inkognito

Right now, my battery level is 10%. Battery estimate for Running (Basic) in Performance mode (no SuuntoPlus apps, etc.) is 4h. Shouldn’t this be closer to 6h according to expected 60h battery life on full charge?

Sergei Ladeishchikov

@larrybbaker At 12% charge, vibration becomes barely noticeable and then disappears completely. If you turn on sound, sound notifications work. The power saving mode is disabled (if I remember correctly, it automatically turns on when the charge is 2%, it also notifies when the power saving mode is turned on and the screen becomes dim). This error was present in the previous version of the software. This way it is very difficult to drain the SV battery to 0% because I will miss all notifications from the phone for 2-3 days. I would have thought that the problem was in the watch itself, but the previous watch was replaced under warranty and the situation has not changed. It is very strange that no one has noticed this yet in the new software, or has their clock not yet discharged to 12%?

Ars Vitae

@Sergei-Ladeishchikov I would avoid discharging the battery to 12% and below. As with mobile phones, the battery should be charged between 20 and 80 % so as not to shorten its life.

Antoine

I have this morning a new issue that i have never seen before update (installed on 16th november): i can’t use touch screen anymore on my suunto vertical to change screen/menu, it doesn’t work, and it is only possible to use button.
A soft reset (12s on upper right button) solved the problem.

jjpaz

@Antoine I have commented on this problem twice, once with the previous version and once with the current one.

Antoine

@jjpaz i have never seen that with previous update. It was during the night when sleeping.

Mff73

@inkognito said in Software release 2.30.26:

Right now, my battery level is 10%. Battery estimate for Running (Basic) in Performance mode (no SuuntoPlus apps, etc.) is 4h. Shouldn’t this be closer to 6h according to expected 60h battery life on full charge?

mine was at 9% yesterday before running, and my estimation was 4h (custom mode with touch screen activated).
I will deplete it fully today to charge it fully after the latest FW update and calibrate my battery.
Maybe yours has another “calibration” currently

Mff73

@Ars-Vitae said in Software release 2.30.26:

@Sergei-Ladeishchikov I would avoid discharging the battery to 12% and below. As with mobile phones, the battery should be charged between 20 and 80 % so as not to shorten its life.

for everyday life, yes, it seems to be a recommandation, but after FW update, and for battery gauge calibration, we also are recommanded to make a full charge cycle once : this unique one should not damage the battery, and when watch will announce 0%, it will just be 0% from the watch meter, and not a total battery discharge.
just my thinking from what i am hearing and reading everywhere.

Pavlas

Hi, I have a new Vertical. Slept with the watch yesterday. And at night I got a notification that I’ve been sitting for a long time and it’s time to move If it was mentioned here, I’m sorry.

Mff73

@Pavlas
did you setup your sleep times range in the watch ?

smopi

@Pavlas In my case, I have never had a notification about inactivity. At work I sit at a desk almost all the time, so it’s weird. My Polar Grit X would show me this notification from time to time.

Pavlas

@Mff73 Yes. And the latest firmware.

Ars Vitae

@Mff73 This procedure, calibration, is followed usually after replacing the battery with a new one and is usually done by a service technician. Unless you are replacing the battery yourself. We would have to calibrate the battery after every system update on the computer, and yet we don’t do that. Such a “calibration” also consumes the battery (I didn’t write, that it “damages”). In my case, a soft reset of the watch, that is restarting it, helped. For instance, I had a battery level of about 63%, which dropped from 68% in 24 hours. After a reboot it went back to 66%.

Mff73

@Ars-Vitae
agree with you about the logic.
we heard so many time this advice for this procedure, that i repeat it all time i hear about any battery questions after a FW update.
But i also retreive this, which goes into your direction
https://forum.suunto.com/post/122861

so maybe the good advice is just : wait and see later.
I don’t know anymore