TSB in Watch Screen Not actually like in app
-
@Egika said in TSB in Watch Screen Not actually like in app:
@ChrisA the TSB and other cumulative training related parameters are calculated in the app, as users possibly use more than one watch.
To only have it in the watch alone would omit trainings from other watches from the calculation.
Finally we get training stats synced between multiple devices!
Like my TI Race that I received today has cumulative training data from the start of the week that I recorded with another device.Are zones now globally used or still need to be set within the individual devices??
-
@stromdiddily individually on each device 🤪
-
@ChrisA noticed today an issue in sleep sync.
When I looked at the Suunto App for the first time sleep period was “21:58-04:00”. It could be because at 4am I awoke for 20 minutes.
In a few minutes it was “21:58-06:00”. I didn’t do anything at 6am besides sleep
And it remains unchanged in Suunto App (v4.77.3).In Suunto Race (v2.29.48) sleep period is correct “21:58-07:01”
I didn’t make soft reset or something else - I just want to track the next night and check whether it is correct.
-
@sashaklepikov works perfectly for me - sometimes it takes some minutes in the morning to catch up (like in your example) but after about 10 to 15 minutes awake it shows the correct times.
-
@ChrisA yes, I supposed that. But now it’s almost 3pm and I’m going to bed soon again
And in SA it is still “21:58-06:00”. You just asked about bugs.That’s fine for me. I just wanted to test it during sleeptime. Usually I don’t wear them at night.
-
@sashaklepikov for me correct sleep tracking depends on setting my resting HR on the watch correctly. If it is too low, the app will track my wake up time incorrectly (too early). If it’s too high, it will not detect the correct time I fell asleep. For me, it works best if I set my resting heart rate on mythe watch about 9 to 10 beats above my nightly resting heart rate.
-
@ChrisA said in TSB in Watch Screen Not actually like in app:
the app will track my wake up time incorrectly (too early)
wow. how interesting…
after the first night I set resting HR as the minimum HR from the first night (54).
on the second night (this night) minimum HR is 52 and this sync issue(?).
just in case I’ll play with these settings. thanks -
@sashaklepikov for me my nightly average resting HR is 52-53 (53 atm)
So I set my average Resting HR on the watch to 62
For me, sleep times and recovery seems to work best and sleep times match the times I actually fell asleep and the times I woke up.
-
There are some many things to like or even love about this watch. But this issue, I can’t understand how did Suunto miss this. It’s understandable that watches aren’t perfect at the launch and propably software update will fix this eventually. But these training metrics shown also in the watch is one of the key elements to buy this watch. And it’s also highly marketed with these features. In my case I tried even a hard reset, but the problem keeps coming back (tsb and ctl numbers). For my watch, it doesn’t need even a soft reset to fix this. Just power off, back on and sync again with suunto app and after that the metrics are correct also in the watch. Still the problem comes back, metrics are correct in the app but after a while not anymore in the watch (unless performing this power off and on…).
-
If I understand this correctly, it will be fixed in November’s update. Training metrics are reset at midnight and need an app sync to be available again, but with next update the watch will remember these values while waiting for the updates.
Watch: Suunto Vertical Ti
Blog: isazi's home
-
@isazi I am on day 3 with my SR. And again, the new TSB value is not synchronised to the watch (app TSB 1, watch TSB 6). On the watch I still see yesterday’s TSB value (which was 6). This also applies to CTL. To me it seems the updated values are not synced at all to the watch in the morning. It doesn’t matter how often I trigger a sync in the app. I don’t think that the problem is, that the watch doesn’t remember the training stats. That’s what the SR currently does. It’s not updating, that’s the problem. At least that’s the beahvior I see.
My guess is, that the newly calculated training metrics are only sent to the watch after a workout, a soft reset or if I turn the watch off and on. I will skip the soft reset today and test this with a nice long roller skiing session
-
@wmichi same Problem with my watch.
No automatic Refresh the values after many times synch. ONLY reboot solved actually the Problem. Seems like new watch with old Firmware 
hope for fast fix it with coming Update -
@wmichi please let us know if your Training manage some new values while synch your TSB CTL with the App
-
@GiPFELKiND My guess was wrong, it’s not syncing after a workout. Today I did a 2,5h rollerski session, which was calculated with 107 TSS according to training zone, respectively 108 TSS according to the activity details (why the difference???). According to the training zone my current weekly TSS is 480, CTL 69, Form / TSB still 1 (this never updates after a workout, only the following day).
Screenshots training zone:
Todays rollerski activity (different TSS value!)
None of this is visible on the watch. In the training widget, todays workout is completely missing:
But if I scroll down to “Duration”, the 2,5h are there:
The recovery training and progress widgets are also not updated:
I did multiple syncs since ending the workout. Still nothing.
Yesterday I did a trail running training. After this training everything was correctly updated on the watch. The only difference between yesterday and today is, that I forgot to active the feeling input in the custom sport profile I made for roller skiing (trail running was also custom, but feeling activated). I always forget to active the feeling toggle.
Maybe this is the reason?I have the latest firmware installed and I am using the latest Suunto App Beta build 2.29.0 (13466) on iOS. Is it a problem with the beta?
-
@wmichi TSB is yesterday’s ATL - CTL so it makes sense that only updates at midnight. Everything else I think should be fixed in next update.
-
Just checked the new firmware and it seems to work for me.
Watch: Suunto Vertical Ti
Blog: isazi's home
-
@isazi Thanks for checking.
-
To be more clear how it works for me now: sunday 29.10. watch and app showing the same ctl and tsb numbers. Just after midnight, when the numbers on the app are updated and sync with watch, again watch and app showing the same numbers like they should. BUT in the morning 30.10.2023 after syncing with the app (for example because of sleep data), it somehow makes the watch use again ctl and tsb that i had on sunday, so day before. And those wont update to monday numbers / same as app, until i power off and on (the normal sync does not work before this off and on no matter how many times you try). And the same goes on and on from day to another. After power off and on, again same numbers for both the watch and the app.
But glad to hear that this could be fixed when next update comes, thanks
-
@isazi you checked the new firmware and on your race it works fine?synched every day the right values TSB, CTL and so?
I have the official firmware but it dont work… What can i do? -
@GiPFELKiND He’s using the beta firmware. With the next official update, the bug should be fixed.
