Sensors full of Bubbles, Plastic peels off.

[zhang965]

GiPFELKiND said in Sensors full of Bubbles, Plastic peels off.:

Martin-Wozenilek DEET a military proofed watch is braking while DEET!? Bad point

kek, your military proofed watch comes with full of bubbles on sensors, that’s a true good point

[Martin Wozenilek]

@GiPFELKiND to which military standard test do you refer? There are many.

[zhang965]

@Martin-Wozenilek said in Sensors full of Bubbles, Plastic peels off.:

GiPFELKiND to which military standard test do you refer? There are many.

SUUNTO 9 PEAK PRO WITH MILITARY-GRADE DURABILITY
Suunto 9 Peak Pro was tested according to the MIL-STD 810H military-grade standard to ensure maximum reliability and durability and it passed all of them.

List of the tests:
MIL-STD-810H - Test Method 500.6 Low Pressure (Altitude)
MIL-STD-810H - Test Method 501.7 High Temperature, operation
MIL-STD-810H - Test Method 502.7 Low Temperature, operation
MIL-STD-810H - Test Method 503.7 Temperature Shock
MIL-STD-810H - Test Method 507.6 Humidity
MIL-STD-810H - Test Method 509.7 Salt Fog
MIL-STD-810H - Test Method 516.8 Shock
MIL-STD-810H - Test Method 516.8 Drop
MIL-STD-810H - Test Method 521.4 Icing/Freezing Rain
MIL-STD-810H - Test Method 505.7 Solar Radiation
MIL-STD-810H - Test Method 510.7 Sand and dust

U.S. MIL-STD-810 is a United States Military Standard that emphasizes tailoring an equipment’s environmental design and test limits to the conditions that it will experience throughout its service life, and establishing chamber test methods that replicate the effects of environments on the equipment rather than imitating the environments themselves.

https://www.suunto.com/en-gb/Content-pages/military-tests-for-suunto-9-peak-pro/

[surfboomerang]

@zhang965 Sooo… no chemical tests.
DEET and suncream are still plausible

[Likarnik]

@surfboomerang military does not use sunscreen, so no need to test

[surfboomerang]

@Likarnik You’re right. Camo paint tests should also be included

[Elipsus]

@zhang965 Well, I don’t have 400€ to shell out for a month just to have a watch ^^

[GiPFELKiND]

@macpen Look i sent my watch to service Center in Prague in 28.6. my unit arrived there at 30.6. The repair Center sent my watch in the way from Prague to finland where my watch arrived in 3.7. yesterday (1 Month later) i got message from SUUNTO Finnland my watch is sending back to me. Today i look in track report --> Finnland sent my watch to Prague. Asking via Email where the Problem is whyi dont get my repaired watch and i only got this as reaction!!! Wait 1 month and now the watch will shipped again from Prague to Germany!!! Why SUUNTO Not directly from Finnland top Germany!!! So sad abou suunto service! Looks totally not coordinated! Sorry Suunto are you kidding me? Are you Joking!?
Where is the good old Suunto Service?! Lost in Wildness!?

[EzioAuditore]

@GiPFELKiND Could it be that you purchased your watch from some idealo store or online (and actually it is CZ watch)? Cause I sent mine to Finland directly and got it back in Germany directly.

[inkognito]

@Hristijan-Petreski According to their website, H.S.H Sport is the authorized Suunto service centre for Belgium, Czech Republic, Denmark, Estonia, Finland , France, Germany, Greece, Latvia, Lithuania, Luxembourg, the Netherlands, Poland, Slovakia and Sweden.
But who knows how does it work in practice and it might also depend on how busy individual service centres are…

[A Former User]

@GiPFELKiND said in Sensors full of Bubbles, Plastic peels off.:

Where is the good old Suunto Service?! Lost in Wildness!?

Hmmh… maybe lost when Amer sold Suunto to China?

But, this is what i am afraid of, i have had this watch now about 3weeks, and if i have to send it to warranty and it takes 4+ weeks, not so good thing to handle. Do i have to buy another one and sell this when it comes back from warranty or something similar. Dunno…

[isazi]

@Felttie said in Sensors full of Bubbles, Plastic peels off.:

@GiPFELKiND said in Sensors full of Bubbles, Plastic peels off.:

Where is the good old Suunto Service?! Lost in Wildness!?

Hmmh… maybe lost when Amer sold Suunto to China?

Amer was already Chinese before selling Suunto to Liesheng.

[altcmd]

@isazi Yeah! Amer itself was sold to China. Suunto has just been passed around in China, although at lower valuations.

[Dimitrios Kanellopoulos]

@GiPFELKiND this is not per SE Suunto hq issue. The issue is with Prague service center. Please contact them.

[Elipsus]

Just sent my watch to CZ, wish me luck on the delays ^^
On a side note, the DHL pickup at home is absolutely great, it feels nice to have things like that made to help you reduce the inconvenience, they grabbed my watch a 2 pm yesterday, and is already out for delivery in Prague

[EzioAuditore]

@Elipsus I had my vertical replaced in a week roughly. Of course I am away from home for a month to test it and enjoy it On a side note though, mine went strait to Finland (no CZ in between).

[Elipsus]

@Hristijan-Petreski Good to know ! My guess is that the repair center in CZ is not yet trained on repairing the Vertical ? otherwise if my watch then has to go Finland from CZ instead of France that’s a huge waste of time/money/CO2

[GiPFELKiND]

@Hristijan-Petreski said in Sensors full of Bubbles, Plastic peels off.:

@Elipsus I had my vertical replaced in a week roughly. Of course I am away from home for a month to test it and enjoy it On a side note though, mine went strait to Finland (no CZ in between).

Why you sent the watch to repair?!

[GiPFELKiND]

@Elipsus said in Sensors full of Bubbles, Plastic peels off.:

@Hristijan-Petreski Good to know ! My guess is that the repair center in CZ is not yet trained on repairing the Vertical ? otherwise if my watch then has to go Finland from CZ instead of France that’s a huge waste of time/money/CO2

Why you sent the watch to repair?

[EzioAuditore]

@GiPFELKiND It was crashing every third run.