Software release 2.30.26

Ars Vitae

@ionparvan You are absolutely right, this is/was one of the best things about this watch, and I didn’t feel any lag, everything was/is ok (I still hope, they will change that option).

ionparvan

@Ars-Vitae At least I hope they can give as the option to pin more widgets, so we can have access to all widgets that we can select with down button, and access to our favorite widgets with the main button.
As it is implemented now, is like having 5 children, and Suunto asks you to chose only one that you love the most.

Iggge

@Frederick-Rochette also have some HR issues. Today my HR went from 60 to 140 when watching morning television. I decided to count to see if that was correct, and I got 64 BPM.
After that I did put on my old Charge 2 to see the HR and that also showed 66, and my Vertical 130+.
Now my HR is always very high (20 or more over other watches).
No idea what has happened…did a hard reset two days ago

Mff73

@ionparvan said in Software release 2.30.26:

@Ars-Vitae At least I hope they can give as the option to pin more widgets, so we can have access to all widgets that we can select with down button, and access to our favorite widgets with the main button.
As it is implemented now, is like having 5 children, and Suunto asks you to chose only one that you love the most.

you can still choose and sort the widget you use and like most in the SuuntoApp, and scroll down instead of right/left.
Plus have one real favorite.
I still personally need to be used to it, but i don’t think it is so worth than before.
But all opinions are just good.

ionparvan

@Mff73 The problem is that selecting like this is not fast / efficient, because:

after you select the widget you want from the list using up/down buttons, you still need to press another button to activate that widget
if you want to select another widget, you need to press one button to go back, then again up and down to select, then again press a button to activate the new widget, just scrolling in one direction with one button is better.
try doing that with a pair of winter gloves, pressing different buttons, going back and forth just to activate the widget you want

I still hope they will implement in the near future the option to pin some favorites widgets, is nice to have available a lot of useful widgets, but only some of them we use most of the time.

GiPFELKiND

@Iggge said in Software release 2.30.26:

@Frederick-Rochette also have some HR issues. Today my HR went from 60 to 140 when watching morning television. I decided to count to see if that was correct, and I got 64 BPM.
After that I did put on my old Charge 2 to see the HR and that also showed 66, and my Vertical 130+.
Now my HR is always very high (20 or more over other watches).
No idea what has happened…did a hard reset two days ago

Same Problem Sometimes. Suunto what to say about this Problem? Same Problem on Vertical and race. ONLY Option to got correct values put the watch off from your wrist 30seconds than in your wrist. You will then have correct values. I cheecked this Problem too, and it seems that the watch exactly count the double heart Beats. Check this!!! And perhaps suunto can give us an answer!

By the way check the back from your heart rate Sensor. I have this Problem too with a first Vertical and the backside from thr OHR looks scratchy. Picture from you?

GiPFELKiND

@Iggge said in Software release 2.30.26:

@Frederick-Rochette also have some HR issues. Today my HR went from 60 to 140 when watching morning television. I decided to count to see if that was correct, and I got 64 BPM.
After that I did put on my old Charge 2 to see the HR and that also showed 66, and my Vertical 130+.
Now my HR is always very high (20 or more over other watches).
No idea what has happened…did a hard reset two days ago

Seems exactly the watch count exactly the double Beats… 66 you wrote with heart belt 130+ the watch LOOK HERE

Frederick Rochette

@Iggge
On very rare occasions it works well…

duffman19

@GiPFELKiND said in Software release 2.30.26:

Seems exactly the watch count exactly the double Beats… 66 you wrote with heart belt 130+ the watch LOOK HERE

Thanks for doing that math for us, @GiPFELKiND. I don’t think the sensor is exclusively reading double the actual HR. The fact is that the LifeQ sensor just isn’t that great and never will be, no matter what future software improvements Suunto may be able to come up with. It simply lacks the number of LEDs and photosensors found on newer sensors from other companies. It’s also probably operating at a very low power for 24/7 monitoring to help conserve battery. That power jumps up (brighter light output) when recording an activity in an attempt to get more accuracy, but the sensor is still handicapped by the lack of inputs.

In my experience, HR numbers seem to hover around 100 bpm while it’s looking for a correct number. Sometimes it finds it, sometimes it doesn’t. Suunto could have chosen to show no reading (sometimes it will briefly show “measuring…”) while it acquires a more confident number, but instead they show the active “hunting” while it looks for a number.

I’m a little confused why people are still demanding accurate HR from this sensor. Yes, I know the watch is expensive and should give us better numbers. I definitely agree with that. But, having read reviews prior to buying the watch, I knew I wasn’t going to get good results from the WHR. So I use an external HR for activities. If you need accurate HR readings 24/7 (not sure who would?), then you’ve got the wrong watch.

e6321

@fluca can confirm, only appears to be an issue with airplane mode selected from control centre.
Control centre airplane mode does not work.

e6321

@duffman19 it does seems to be worse since update. Locking to high rates while not moving which I never noticed before.

Ars Vitae

@ionparvan I haven’t done an update yet (I’m waiting to see what they did with version 2.25.64, after a week there was an update to 2.25.66). Are you saying that only the button can access the widgets? Can’t it be done by swipping the screen? If you don’t mind me asking: does swipping to the right exit each interface menu all the way back to the start screen? Is this option for moving around the interface retained? Has navigating the interface totally changed?

stromdiddily

@Ars-Vitae said in Software release 2.30.26:

@ionparvan I haven’t done an update yet (I’m waiting to see what they did with version 2.25.64, after a week there was an update to 2.25.66). Are you saying that only the button can access the widgets? Can’t it be done by swipping the screen? If you don’t mind me asking: does swipping to the right exit each interface menu all the way back to the start screen? Is this option for moving around the interface retained? Has navigating the interface totally changed?

Yes, it has changed. Down button gets you to the widgets. Middle button gets you to your pinned widget and long hold of upper button gets you to your “upper button shortcut”.

Takes some getting used to but I like it a lot better

Ars Vitae

@far-blue Thanks for informations. And how does swipping the screen work? Same as before?

Ars Vitae

@stromdiddily Thanks for informations. And how does swipping the screen work? Same as before?

Dimitrios Kanellopoulos

@Ars-Vitae yes

Antoine

@Dimitrios-Kanellopoulos i have done trainings on wednesday / thursday / friday but today (saturday) the TSS graph widget on the SV watch displays tuesday / wednesday / thursday: that is the same problem (“values are off by one day. Known issue”) ?

runomatic

@ionparvan said in Software release 2.30.26:

@runomatic we don’t want to pin only one widget, we want to scroll through the widgets we need with the middle button, I don’t understand why they removed that great option, maybe just to fix the lag problem. No option, no more lag, the problem is fixed.

Why are you talking about a “we”? I think the solution with the bottom button is perfectly fine. You can also sort and deactivate the widgets in the app.

Ars Vitae

@Dimitrios-Kanellopoulos Thanks.

Sebastian Linder

I also have the no map shown issue since this release. Also it seems to drain the battery way faster once this appears. After a restart, no drain issue until the map doesn’t show again. Seems like it’s always trying to load the map in the background or something.