Same trail and very different ascent/descent

Bogdan1921

Yes but the difference is to much:

Ascent for example: 1102 vs 2106

zhang965

@Bogdan1921

I got 60m vs 24m same place in 2 weeks

el2thek

@Bogdan1921 the 2020 graph is a lot smoother. Did you have something covering the watch (like a sleeve) this time. I have read that something covering the baro sensor can cause changes in pressure and as a result affect the altitude reading.

Bogdan1921

@el2thek
Yes, this time I had a long sleeve jacket.

@Bogdan1921 unless it was an air tight sleeve, it shouldn’t matter that much IMHO.

The way altitude gain/loss is calculated might be different between the 2020 and 2023 firmware… wild guess.

zhang965

FusedAlti
FusedAlti provides an altitude reading that is a combination of GPS and barometric altitude. It minimizes the effect of temporary and offset errors in the final altitude reading.

NOTE:
By default, altitude is measured with FusedAlti during exercises that use GPS and during navigation. When GPS is switched off, altitude is measured with the barometric sensor.

https://www.suunto.com/en-gb/Support/Product-support/suunto_vertical/suunto_vertical/settings/fusedalti/

isazi

@twekkel how ascent and descent are compute changed in 2021 with the introduction of a new algorithm, although difference should not be this large. It was very windy and/or rainy this year?

Bogdan1921

@isazi

It was approximaty the same conditions, without rain.

isazi

@Bogdan1921 strange, the alti profile is definitely more nervous in 2023, something was bothering the baro sensor it seems. I would clean the watch to be sure nothing is clogging the sensor from the inside, but it looks like something was pushing air in and out.

Bogdan1921

@isazi

Yes that’s the next step, I will clean the watch and see in the feature how it works. Thanks