Battery drain

Brad_Olwin

@freeheeler To me it sounds that the standby light consumes more battery than Suunto intended. Although it could be that the battery claims were made with the standby light off and they send out the notification because it is on by default right now.

In our testing we had firmware updates where Standby = on by default and we experienced higher than expected battery drain. The intent is to have Standby = off by default. Turning Standby = on will deplete the battery faster than the published specifications.

Dimitrios Kanellopoulos

Please keep in mind that battery needs a full circle 0-100 to calibrate. Thus you might see faster drops near 50-100 and slower at lower percentages.

surfboomerang

@Dimitrios-Kanellopoulos That’s a problem with the SV. It takes ages before it’s totally empty

I still haven’t used the charger since the watch is delivered. And it will take a couple of weeks I guess.

isazi

@surfboomerang I only used it because I needed more maps

jjpaz

@surfboomerang You can leave the watch with an activity started and wait 2 days to drain the battery!

dombo

during my last activities battery drain was ~5% in one hour. I lost 50% of battery in 10 hours bike ride - custom sport mode, weather + climb sport apps and navigation where I had more than half of the time only black tiles…

Tieutieu

@dombo said in Battery drain:

during my last activities battery drain was ~5% in one hour. I lost 50% of battery in 10 hours bike ride - custom sport mode, weather + climb sport apps and navigation where I had more than half of the time only black tiles…

Did you checked if backlight is off ??

dombo

@Tieutieu yes, it is off. in standby battery is OK

So this happened today…

Yesterday I went to bed and had still more than 30% of battery left.

I however woke up with 16% battery left, not sure what happened overnight, but I have also had only 51 minutes of sleep recorded. 16% is still enough, so I went out for a bike ride. When I started the activity, the battery prediction showed only 2 hours of activity left - that was strange. I changed the Battery mode from Performance to Endurance, which showed 3 hours - so I went for the bike ride. After 30 minutes the watch turned the power saving mode on, and shortly after that turned itself off.

So yesterday at 22:30 it was 30%+ and today around noon 0%. Standby is OFF. Brightness and Rise to wake on Low. Any idea?

Brad_Olwin

@tomasbartko First, did you check Standby backlight? Second, has the battery cycled from 100% to 0% to calibrate? The percent battery may not be correct, see posts on this.

@Brad_Olwin I have Standby turned off, but I didn’t go through the first cycle. I have read comments about the first cycle, but have never experienced this with previous watches (also from other brands). Is this “Vertical specific”?

isazi

@dombo using two S+ apps results in twice the battery consumption

Łukasz Szmigiel · S9PP 2.37.48

@isazi even if an app just displays the notes or some very simple stuff?

isazi

@Łukasz-Szmigiel seems so to me, I think it needs further optimization

Jose Luis

Hi, I want to cycle the battery from 100% to 0%.
Currently it is 20%, is it necessary to completely drain the battery or do I have to charge it before?

Thank you

Tieutieu

@Jose-Luis said in Battery drain:

Hi, I want to cycle the battery from 100% to 0%.
Currently it is 20%, is it necessary to completely drain the battery or do I have to charge it before?

Thank you

Interested with the answer too ! Currently 4%…it’s hard to get it to 0% !!

freeheeler

@Tieutieu
I’ve done a dummy activity to drain completely to 0%.
it’s not too hard when gnss is active, it actually goes very fast… at least in my case

Jugger

@Tieutieu I did battery draining with max light (always on) and maps open inside my home.

babychai

may i know under what condition need to do battery calibration? is it every new watch recommended to do battery calibration?

sartoric

@babychai
basically every electronic gadget need a battery calibration once