Altitude and barometer issues.
-
@sartoric around 8-9 hPa
X10, Vector, Ambit2, Suunto 9 Baro + HR smart sensor, PolarX10 HR strap (current) & SA 2.24.1
Walking, hiking, running, climbing & mountaineering. -
@tomviv said in Altitude and barometer issues.:
around 8-9 hPa
If the altitude is set according to Google Earth Pro, then my barometer shows 10 - 11 hPa less than the actual pressure above sea level
-
@tomviv @ist-1973 How do you know what the actual pressure is? This will vary depending on location and weather. I do not have a commercial weather site close to me so I cannot know exactly what the pressure is. My altitude will change when we have weather events. When I start an exercise FusedAlti will correct the altitude. I rarely adjust my altitude manually. The best way to do this is use the auto adjust, this requires the watch gets a good gps fix.
-
@tomviv
in addition to @Brad_Olwin 's comment, I’d like to add that you might want to read pressure as a relative value only, not as an absoluteliving sideways
-
@tomviv I live at sea level and just checked my S9P.
Watch: Alt 0m, Baro 1021hPa
3 Offical weather stations around me within 30km: 1019.1 - 1019.3 hPaWell within margins I would say and, as @freeheeler already mentioned, the speed in which pressure raises or drops is more important than the exact value.
-
As an additional note, the baro sensors in our watches cannot be compared to a precision one used in most professional weather station, so there can be some discrepancies.
If you search the forum there is an old topic about pressure,sensors and precision
-
@sartoric The height is the same. The pressure is different.
Which clock shows correctly?
-
@ist-1973
that’s impossible to tell IMHO… what’s strange is that baro graph isn’t the same. did both watches stay together the past 12 hours? -
@freeheeler said in Altitude and barometer issues.:
did both watches stay together the past 12 hours?
And both should be in the same conditions, clean, not covered etc.
-
@sartoric Yes. Together.
-
@ist-1973 On the clock scale, the division price is different. 2 hPa, and 4 hPa
-
@ist-1973 The conditions are the same. Together on a closet shelf.
-
@ist-1973
strange… maybe you need to clean the sensor (soak it in water) and observe again -
@freeheeler
Today I went for a run with my wife along the same route. Here is the data.
Difference in watch pressure 9 hPa![1659269024817.jpg]
(/assets/uploads/files/1659269649255-1659269024817.jpg) 
![1659269024829.jpg]!
(/assets/uploads/files/1659269685098-111.jpg)
-
@ist-1973
looks alright
I assume you can ignore the pressure difference as everything else looks good
-
@freeheeler thank you. I think this is where I was going wrong although I’m assuming absolute pressure is at sea level, which is where I was for the week. Now I am back at home it makes more sense for the readings to be out by 8-9 hPa given my altitude.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login