Ambit3 Peak elevation gain
-
@Fenr1r have you read Sanderson (Way of Kings)? You remind me of Wit (aptly named).
-
@fazel maybe one of Elon Musks satellites started, hit a gps satellit and pushed it 3500m out of orbit
-
@dominikbalko
don’t get me wrong, it just reminded me how great those ambit apps were. I don’t entirely miss them but it is just great what’s possible
-
am facing a similar issue when going skitouring, I get always 200/300 meters more than in reality. I have Fusedalti activated, and noticed that the altitude is decreasing costantly when temperature drops (e.g exiting the car before starting the tour). I suspected the barometer and sent it for RMA but Suunto claims the barometer is ok.
As I would like to avoid setting manually the altitude every time before startin, is there any other workaround?
-
@zzmike76
is the behaviour different when you set the altitude manually before the start? -
@freeheeler yes when setting it manually it is more precise. I realized the skitour sport mode was set to auto, I will try this weekend with altitude mode only.
With my SSWHR I never had to set the altitude manually and readings were correct
-
@zzmike76
you are talking about the alti-baro mode that switches automatically. I don’t have experience with that since the settings in my A3PS was always alti. Maybe (!) the watch does go back to baro during slow altitude changes even during an activity? Is that possible at all?What I was asking for: do you manually adjust the altitude value before you start? If you do that within 15min before the start FusedAlti is deactivated and can not do corrections caused by weather changes etc
living sideways
-
@freeheeler said in Ambit3 Peak elevation gain:
you are talking about the alti-baro mode that switches automatically. I don’t have experience with that since the settings in my A3PS was always alti. Maybe (!) the watch does go back to baro during slow altitude changes even during an activity? Is that possible at all?
In the A3P, the mode switches after 15 minutes of no altitude change. At my place we have negligible altitude changes so my A3P was almost always in baro mode. In movescount it was possible to select how the watch should deal with pressure changes. (variable altitude vs fixed altitude)
This option has changed in SA and S9 combination. Now I still believe the X minutes of no significant altitude change, switches the watch to Baro mode, but it is not possible to select the mode in activity again.
This is why I have an average of 250m total ascend and descend during a windsurf session since I record them with my S9. On my A3P this was a flat line because it was kept on the same altitude and the pressure changes were interpreted as weather changes. -
@surfboomerang
250m ascent is a lot for a windsurf! …unless you do a lot of high airs
I once went surfboard paddling here in the lake and came to something like 17’000m ascent caused by the frequent submerging into the high density water.Isn’t it still possible to setup these things for A3PS in movescount?
How is it handled if you set it up for baro but now you want to have it changed to either automatic or alti?
Does a default setup overwrite MC A3PS settings from SA once you sync?living sideways
-
@freeheeler I have no idea if it’s still possible. I don’t own the A3P anymore.
When I bought the S9B, I used it with movescount the first two activities. After that I switched to SA. -
@freeheeler no I never adjusted the altitude manually. I suspect the auto alti-baro setting is having issues in getting the right values, as the altitude is rapidl going well below the real one. Will try on weekend with altitude only profile
-
@freeheeler yes it is still possible to change the values in movescount
-
so today I went skitouring, I set both profiles (watch and skitouring activity) to altitude, I went to the place (I started from Realp -1538 meters).and then i manually set the reference altitude .Still I see start and end altitude completely wrong. ,respectively 1474 and 1388 ! I suspect I am doing something wrong?
-
@zzmike76
nice, what was your summit?
maybe, what you could have done wrong: setting the altitude manually. It switches off FusedAlti and if there is weather change, hence different pressures, then FusedAlti can’t do its magic.
But the weather is pretty stable between the north and Tessin at the moment afaik… can you share the alti graph? -
@freeheeler easy going, went to Tälligrat
Weather was super stable, my understanding of setting manually the altitude is that it should avoid the FusedAlti discrepancies?
-
@zzmike76
nice summit! I recall it was a lot of “cross country ski style” to get into the valley and to the actual ascent, but very nice slopes
the graph looks alright. The point is with the FusedAlti, and I did not believe this until around 2 years ago, you want this to work. Because it is much more precise than setting a manual altitude and the watch just calculates the difference.
Next time, leave your watch in alti mode (I never used anything else), when you start the activity do it without manually adjustment of alti and just wait for the satellites to lock, then start. Even if the watch shows in Realp 2’000m, it will be corrected throughout the activity. Normally within 15 minutes, and of course on the fly if the weather is shifting -
@freeheeler thanks for the hint, will try in the weekend (next skitour is planned :)) !
-
@zzmike76 i went skitouring today, and noticed the following: while driving the altitude was correct (again in Realp!) at 1530, as soon as I exited the car it started going down…after 30 minutes I started the activity, but noticed that it was mentioning 1340. Once reaching the peak, it was showing the right altitude. As in the other recording, this would mean 200 meters more in ascent. Unfortunately I cannot share the graph as the watch went in pause for a while, but next weekend will try again
-
@zzmike76
why did the watch pause itself?
Do you have any graph or no graph at all? it would be good to see the graph and route you made today.
alti drop could also be related to temperature drop but should be backward corrected with fused alti.
my friend has my “old” A3PS and he had no issues this weekend whatsoever (Obergoms). -
@freeheeler i simply forgot to lock the watch (doh!) and probably pressed inadvertently the pause , am attaching anyway the graph
PS : I suspect the temperature at this point
