How to view POWER data in SA?

[suzzlo]

@Bulkan said in How to view POWER data in SA?:

use it as a powerpod and footpod in the watch.

This could be the answer. You need to pair Stryd 2 times:

• Power Pod
• Foot Pod

This this

[Mi_chael]

@suzzlo

No,

If your paired than power pod, you have just power.

If your paired than foot pod, you have power, speed/ pace and cadence.

In the beginning, i paired my Stryd than foot pod but the accuracy was not good.
Now, i paired my Stryd than power pod.

[Brad_Olwin]

@Mi_chael You are correct. I am on iOS and power is working fine, this is from this morning.

[Brad_Olwin]

@Bulkan said in How to view POWER data in SA?:

Hi, I use Stryd and I have the power in suunto app.

I use it as a powerpod and footpod in the watch.

You should not do this now, pair only as powerpod or only as footpod, either will provide power. Both may be an issue. I believe this is correct for Spartan and I know it is correct for S9/S5

[paul870]

Well, my watch is paired fine, shows POWER in real time as I’m training, all types of power are available.
I have NOT paired the Stryd with the SA, did not think i would have to do that, it’s just taking the data from the watch? and displaying it in the app or at least that’s what I thought.

In MC it all shows up fine, and of course PowerCenter shows all the data as well as Strava / Runalyze / TP / TrainAsOne

The only place the data does not show up is SA

I will check with Stryd about syncing the data with SA, was just hoping for a definitive answer on here.
Runs done with my Ambit 3 also do not show any POWER graphs, but both do show total POWER figures, so why does the graph just not automatically appear?

This is a Sony Android mobile.
Suunto Spartan Sport
Suunto Ambit 3 sport (the better watch in my eyes)

[Dimitrios Kanellopoulos]

@paul870 for Ambits that might be a bug…

For your spartan the chart should show stryd power.

Stryd should only be paired with your watch not SA

[A Former User]

For Ambit3 Vertical I can confirm, that I cannot see power in SA, whereas I could see it on movescount. I use the original Stryd Pioneer power pod (chest mounted), not the food pod.
Will this be fixed?

[Brad_Olwin]

@mzungu I have a Pioneer as well but do not use it anymore. I believe the cadence channel was used for power. You do not pair this Stryd as a Powerpod, the Pioneer was an HR and power device all in one. I have not used mine in some time. I am not sure this is enabled in SA. I will check to see if it shows in mine as the Stryd footpods do work but I will not be able to do this until later today.

[paul870]

Well, just thought I would ping on here again.
I still have NO power showing in the panel directly after the HR panel, it’s just PACE / SPEED / ALTITUDE

I would also point out that after that there is NO reference to POWER anywhere in the SA, would be nice to see the POWER in the 30 day summary.

I now tend to take more notice of my POWER numbers than anything else, which another thing that SA seems to be lacking.

any suggestions are welcomed with open arms

[paul870]

Still NO power charts from my Stryd in SA…
Fine in MC
Fine in QS… fast becoming the go to place by the way.
Fine in Analyze
Fine in Power Center
in fact fine everywhere except SA…

anyone?

[isazi]

@paul870 I do have a power chart when running with Stryd and my S9.

Edit to add a screenshot.

[Brad_Olwin]

@paul870 This is strange, as @isazi on Android and me on iOS both have power in SA. I do not have power in my weed or month summaries.
Add screenshot iOS for Hill Intervals.

[paul870]

@Brad_Olwin well for Tuesday I did a simple economy run (recovery) uphill so I was trying to keep my power even… using Stryd on SSS watch.
in MC i get the full power graph…

but when I look at the same run in SA I get…

not sure if that is very clear, but in SA I only get the PACE / SPEED / ALTITUDE graphs…

if I look in QS i get…

I have uninstalled, re-installed / tried everything.
finding this very frustrating…

[Brad_Olwin]

@paul870 So, which Stryd are you using? How is the Stryd paired on your SSS? It seems something is off here, either the app is not working correctly on the phone or some other issue. Are you running the latest beta for the app or the Play Store version?

[sartoric]

@paul870 said in How to view POWER data in SA?:

4.15.3

@Brad_Olwin

Could be the app version ?
@paul870 You don’t have the beta version , correct ?

[A Former User]

@paul870
I can report the same. My setup: Suunto Ambit 3 Vertical + (old) Stryd Pioneer Powermeter (Chest), connected as Powerpod with watch.
Watch shows power live on dedicated data field while running. MC shows power after workout (manually uploaded via cable). SA doesn’t show power.

[Bulkan]

Maybe is the pioneer edition and the log in Suunto app. Very strange all this. The only variable is the pioneer Stryd.

[Brad_Olwin]

@Bulkan When the OP replies we can try to figure this out. If it is the Pioneer, it transmits the information on the Cadence channel if I remember correctly. I found the Pioneer much less reliable than the footpod and that is why Stryd transitioned.

[Bulkan]

@Brad_Olwin That’s right. I read the paper about the footpod and chest. If it is in the channel cadence I think it won’t be read as power in Suunto app. Maybe @Dimitrios-Kanellopoulos knows it and we can report it.

[Dimitrios Kanellopoulos]

Just to understand this is a Spartan ? Can i have a link to the activity where power is missing ?