to all the ambit3 users - need some hints on fused-anti
-
Hi @TELE-HO !
thanks very much for your help.
fused-alti is the main reason for me for this watch. and all the 13 sports i did before, have been rock solid.
just today, it didnāt get the point. all the runs before on the same round route -> spot on. (and that in a for me completely flat area).
iāll try tomorrow run with altitude profile not with auto. maybe it just was a bad day, or its because of the auto setting. ( i did just auto, because weather was changing a lot here the last days, and running was nearly flat.)
do you know if A-GPS data gets refreshed while syncing with the mobile phone too, or only by cable? -
@mario_b
what I know about the auto baro-alti profile is that it switches from baro to alti when the pressure changes and the watch is in motion. When the watch is not in motion, letās say on the desk and the pressure changes it remains in baro. I think I once read something about around 5m of altitude change and then it switches. But to be sure Iām always in alti, and I donāt observe the weather on the watch, I use the multimodel in MeteoblueThe GPS āoptimizationā or how the call it (updating satellite orbiting data) is only working thru cable by the moveslink2 on the laptop. At least that was an information over a year ago from Suunto customer care. MC app does not support updating GPS data.
I think SA does that also for Ambit3.
For now Iām syncing thru MC app to have all my data stored in MC web and have it uploaded to Strava.
After that I sync with SA and force the app to stop once the activity is uploaded to SA. During the sync with SA it always says something about updating GPS data or something similarā¦
The only reason I sync to SA is to be able to do some testing with every updateā¦
Until SA is working solid and supports A3 entirely I stick to MC -
Do you mean this? Point 4.4 of the manual
Weather and altitude changes both cause a change in air pressure. To handle this, Suunto 9
automatically switches between interpreting changes in air pressure as altitude or weather
changes based on your movement.
If your watch senses vertical movement, it switches to measuring altitude. When you are
viewing the altitude graph, it is updated with a maximum delay of 10 seconds.
If you are at a constant altitude (less than 5 meters of vertical movement within 12 minutes),
your watch interprets air pressure changes as weather changes and adjusts the barometer
graph accordingly. -
Hi @TELE-HO !
about the auto: yes youāre right. if you move in elevation for 3 minutes 5 meters (around 0,5 hPa pressure change) it switches to alti. if youāre in between 5 meters for 12 Minutes it switches back to baro mode.i like the documentation on this watch, so there is no guessing.
but thanks very much, i think you solved my question. i think that the elevation is just around 5 meters of ups and downs, that why it sticks on baro. and the days before it was just over the 5 m point to switch to alti.
-
@Saketo-Nemo
i just found the same. thank you.
works great! -
@TELE-HO said in to all the ambit3 users - need some hints on fused-anti:
@mario_b
I either let it calibrate automatically before an activity or I manually adjust the altitude when I know the exact altitudeā¦ I then assume fused alti does the rest during the activity.@TELE-HO for your info: if you manually calibrate the altitude while in an activity, fused-alti will be turned off. https://www.suunto.com/Support/Product-support/suunto_ambit3_peak/suunto_ambit3_peak/features/exercising-with-sport-modes/
-
@mario_b
I only adjust the altitude manually before I start an activity. -
@TELE-HO ah ok. i will try that too. thank you
-
I would avoid auto for all cases except track and filed (although there should be baro) and flat runs eg Netherlands.
-
@Dimitrios-Kanellopoulos thank you. i changed every activity to alti profile except the ones i do no care about elevation and hiking. (hiking because here in the alps it would be nice to get a āstorm-alertā on weather changes) and i do not hike in flats.
-
@mario_b good point.
-
@mario_b
when Iāve had the Suunto Core couple of years ago, I tried the storm alert and it came up several times without any signs of a stormā¦ I use the weather alert from the Swiss Meteoā¦ donāt know if there is something similar in your area?
To be honest but without wanting to be mean: I think the storm alert is more a gimmickā¦ -
@TELE-HO Kida gimmick. IT works as it should (3HPA drop) but not all storms drop that nor it means definately that a storm passes by.
-
@Dimitrios-Kanellopoulos
I think it could be useful when youāre out in nowhere, no cellular network, no radio, no access to meteo news etc
But Iām never thereā¦ so I have it as you recommend always in alti mode -
@TELE-HO yup. Except at nights that wakes me up sometimes here due to the summer storms
-
@TELE-HO i know that on baro watches it only works when in baro not in altitude mode. if you do not a sport and you are in auto mode, often it raise up the altitude instead of a storm alert. but in sports mode, with auto profile and fused-alti enabled, when it corrects the elevation it also corrects the sea level pressure. (i saw that on a friends watch and found it works great). and i could be wrong but @Dimitrios-Kanellopoulos i think it is 4 hPa in 3 hours.
i know it does only give you a hint, if a storm could be and i would not rely on it, but its a nice thing to have. -
@mario_b yup I dont remember the number by heart and I think what I said might be for Spartans/s9
-
@Dimitrios-Kanellopoulos
i think it does not really mather too. pressure drops, watch peeps and bad weather could come. the good point is, everybody can choose to turn it on or off.