to all the ambit3 users - need some hints on fused-anti
-
Do you mean this? Point 4.4 of the manual
Weather and altitude changes both cause a change in air pressure. To handle this, Suunto 9
automatically switches between interpreting changes in air pressure as altitude or weather
changes based on your movement.
If your watch senses vertical movement, it switches to measuring altitude. When you are
viewing the altitude graph, it is updated with a maximum delay of 10 seconds.
If you are at a constant altitude (less than 5 meters of vertical movement within 12 minutes),
your watch interprets air pressure changes as weather changes and adjusts the barometer
graph accordingly. -
Hi @TELE-HO !
about the auto: yes you’re right. if you move in elevation for 3 minutes 5 meters (around 0,5 hPa pressure change) it switches to alti. if you’re in between 5 meters for 12 Minutes it switches back to baro mode.i like the documentation on this watch, so there is no guessing.
but thanks very much, i think you solved my question. i think that the elevation is just around 5 meters of ups and downs, that why it sticks on baro. and the days before it was just over the 5 m point to switch to alti.
-
@Saketo-Nemo
i just found the same. thank you.
works great! -
@TELE-HO said in to all the ambit3 users - need some hints on fused-anti:
@mario_b
I either let it calibrate automatically before an activity or I manually adjust the altitude when I know the exact altitude… I then assume fused alti does the rest during the activity.@TELE-HO for your info: if you manually calibrate the altitude while in an activity, fused-alti will be turned off. https://www.suunto.com/Support/Product-support/suunto_ambit3_peak/suunto_ambit3_peak/features/exercising-with-sport-modes/
-
@mario_b
I only adjust the altitude manually before I start an activity. -
@TELE-HO ah ok. i will try that too. thank you
-
I would avoid auto for all cases except track and filed (although there should be baro) and flat runs eg Netherlands.
-
@Dimitrios-Kanellopoulos thank you. i changed every activity to alti profile except the ones i do no care about elevation and hiking. (hiking because here in the alps it would be nice to get a “storm-alert” on weather changes) and i do not hike in flats.
-
@mario_b good point.
-
@mario_b
when I’ve had the Suunto Core couple of years ago, I tried the storm alert and it came up several times without any signs of a storm… I use the weather alert from the Swiss Meteo… don’t know if there is something similar in your area?
To be honest but without wanting to be mean: I think the storm alert is more a gimmick… -
@TELE-HO Kida gimmick. IT works as it should (3HPA drop) but not all storms drop that nor it means definately that a storm passes by.
-
@Dimitrios-Kanellopoulos
I think it could be useful when you’re out in nowhere, no cellular network, no radio, no access to meteo news etc
But I’m never there… so I have it as you recommend always in alti mode -
@TELE-HO yup. Except at nights that wakes me up sometimes here due to the summer storms
-
@TELE-HO i know that on baro watches it only works when in baro not in altitude mode. if you do not a sport and you are in auto mode, often it raise up the altitude instead of a storm alert. but in sports mode, with auto profile and fused-alti enabled, when it corrects the elevation it also corrects the sea level pressure. (i saw that on a friends watch and found it works great). and i could be wrong but @Dimitrios-Kanellopoulos i think it is 4 hPa in 3 hours.
i know it does only give you a hint, if a storm could be and i would not rely on it, but its a nice thing to have. -
@mario_b yup I dont remember the number by heart and I think what I said might be for Spartans/s9
-
@Dimitrios-Kanellopoulos
i think it does not really mather too. pressure drops, watch peeps and bad weather could come. the good point is, everybody can choose to turn it on or off.