SSU 2.5.18 - ON AIR

ianshowalter

After today’s run I can confirm that measuring altitude during a run after the watch has gotten thoroughly soaked in the rain is vastly improved over what it used to be in that circumstance. I used to get some wild variations when that happened; it looks like the update fixed that.

stromdiddily

Sample size of 3 but tracking has been great post update. Noticeably better than the trusty A3P on two of the three runs

ColdBeer

On SST, add far as I tested it, seems sobbed the battery indication bug who showed a totally crazy value (for example: it shows 50% and when you connect it to charge, it changes to 18%).

Last test, it was showing 45% and when connected, 43%, which seems fine.

Tim4c

@Tim4c said in SSU 2.5.18 - ON AIR:

After the update, the sync with SA is coming back to normal (not stuck during “preparing sync”). We have to wait few days to confirm because an update it is almost like a reset, no?

App stuck again. The duration increase slowly day by day, now it’s almost 20s. ++

borgelkranz

What do you think of the weekly training summary? I feel its a non-feature because it’s not persistent.

To clarify: currently I’ve disabled standby background lighting. The summary popped up, but the watch was to dark to read it. Intuitively I pressed the middle button and it was gone…

Feature wise I would expect it to be persistent so that I can review it, when I want to. For example in the training insight area…

What do you think?

jw cou

I fully agree, i’ve missed it too (pressing the middle button) so I couldn’t tell which data is shown…

@borgelkranz Why don’t you create a new post as a feature request for this? I agree 100%

borgelkranz

@Yannis-Belouris said in SSU 2.5.18 - ON AIR:

@borgelkranz Why don’t you create a new post as a feature request for this? I agree 100%

You are right. Done.

nassosc

did a 5k treadmill workout today but S9 was way off. Treadmill measured 5k watch 4k. 1k difference in five. Usually there is a 2-300m difference in 10k runs but this was too much.

Has anyone else seen something similar?

Saketo Nemo

@sartoric

That’s very boring
you no longer reported the problem or am I wrong?

sartoric

@Saketo-Nemo
Not yet
I must send an email to support

Tim4c

Hi everyone,
I tested autolaps settings yesterday. i made a mistake by setting 2km per lap instead of 20km. Once you click on Start, you can’t edit this setting.
@++

77alex77

Hello,

With Suunto 9, is there any way for deleting all of the moves stored in the diary in one time ? I did not find any command in the watch and the only way I have found is to delete them one by one which is not handy at all.

Thanks.

Saketo Nemo

You can reset all the watch by suunto link, settings, watcg, reset

Philippe Segers

Dear all, I’m new on the Forum, and may have missed some info, please apologize if I’m out of the scope… I’ve update to 2.5.18 with a Suunto Spartan Trainer Wrist HR Black (174380007338). I have choose the new watch face, with the red and orange ring around, but I’m not able to find any description of them anywhere (on the web site, the tuto, the new Suunto Spartan Trainer Wrist HR Black User Guide, version 2.5.20, or even on the Suunto 9 User Guide)… Could you please help ? The support is not helpful so far, but I have other issue, like a pairing issue with the Suunto HR belt and MoveScount vs Suunto app conflict, which is another annoying story… Thanks a lot.

sartoric

@Philippe-Segers said in SSU 2.5.18 - ON AIR:

Dear all, I’m new on the Forum, and may have missed some info, please apologize if I’m out of the scope… I’ve update to 2.5.18 with a Suunto Spartan Trainer Wrist HR Black (174380007338). I have choose the new watch face, with the red and orange ring around, but I’m not able to find any description of them anywhere (on the web site, the tuto, the new Suunto Spartan Trainer Wrist HR Black User Guide, version 2.5.20, or even on the Suunto 9 User Guide)… Could you please help ? The support is not helpful so far, but I have other issue, like a pairing issue with the Suunto HR belt and MoveScount vs Suunto app conflict, which is another annoying story… Thanks a lot.

Hi @Philippe-Segers
If you search the forum you should find almost all the clarification you need, there are several discussions related to your “issues”

e.g.
https://forum.suunto.com/topic/1240/parallel-use-of-movescount-suunto-app

Dimitrios Kanellopoulos

@Philippe-Segers btw 2.5.20 is latest version for the Trainers

Philippe Segers

@sartoric Dear Sartoric, thanks for the link, I’ve already read it some time ago, but this is still a mess, very confusing, asking you to remove one app (MC), installing another (SA), but it came to registering the Suunto HR belt it ask me again to do it on MC… But My main issue (here) was to understand the “nice” red and orange rings around my watch… any decent information, user guide, web page ?

Philippe Segers

@Dimitrios-Kanellopoulos Thanks Dimitrios, I’m using 2.5.20 but My main issue (here) is to understand the “nice” red and orange rings around my watch… any decent information, user guide, web page ?

sartoric

@Philippe-Segers
Have you already checked this very thread (scrolling up a bit) ?

https://forum.suunto.com/topic/1443/ssu-2-5-18-on-air/51