SSU 2.5.18 - ON AIR

kolyany4

@Dimitrios-Kanellopoulos said in SSU 2.5.18 - ON AIR:

@Zdeněk-Hruška I think you can hold a little the middle button to turn on backlight. That is what I do. And yes I think you can turn off touch via power options now.

@Dimitrios-Kanellopoulos is this feature (“holding a little the middle button to turn on backlight” during activity) available on S9?

Just tried with Running and Walking on my S9 with 2.5.18.

If after starting exercise screen is locked (using lower button):
1.1. short press on middle button - switch between activity screens;
1.2. long press on middle button - ‘Locked’ message is displayed.
If after starting exercise screen is not locked:
2.1. short press on middle button - switch between screens;
2.2. long press on middle button - exercise “Options” menu is shown.

NB. Probably, activation of backlight by single long press is not good idea, since it can be accidentally caused by sleeves or gloves, resulting in battery drain. Especially, when buttons are explicitly locked to avoid such misfortune.
Perhaps, some sequence could be helpful here (something like “long press + short press” of lower button that is used to unlock buttons).

Dimitrios Kanellopoulos

@kolyany4 Excuse me probably I confused the requirement.

by holding a bit the middle button does not toggle the backlight state.

It does however light up the screen just a little before the options is about to appear.

Makes sense?

kolyany4

@Dimitrios-Kanellopoulos It does however light up the screen just a little before the options is about to appear.

Nope.
Only gear image with circle around it is animated, though without any backlight active…

Dimitrios Kanellopoulos

@kolyany4 definitely does for me Strange… I have backlight to off

kolyany4

@Dimitrios-Kanellopoulos said in SSU 2.5.18 - ON AIR:

@kolyany4 definitely does for me Strange… I have backlight to off

It was found that
Case 1:
Setting->General->Backlight->Mode = Toggle
and
Exercise->…->Options->Backlight = Normal,
then backlight is not activated during Exercise if buttons are pressed.

Case 2:
Setting->General->Backlight->Mode = Automatic
and
Exercise->…->Options->Backlight = Normal,
then backlight activates if I press any button (during Exercise)…

Thus, it would be great to have option to activate backlight during Exercise even when Mode == Toggle…
which doesn’t mean that in latter case backlight should be activated whenever button is pressed: I activated Toggle mode for backlight to save battery as much as possible, and I want backlight on only if I explicitly activate it (e.g., by some key combination in this case)…

Zdeněk Hruška

@kolyany4 Exactly, that’s what I thought. I have always used toggle mode to save some battery. But because you are unable to tu turn the backlight on when you turn the touchscreen off I think I will use the automatic mode with 10% brightness or something.

nassosc

Hello guys,

updated my S9 and went for an easy run. It was also a good opportunity to test the OHR if it got fixed (not that it is mentioned on the change logs).

Well it is not. As you can see on the pics there is dramatic drop on the graph and that is when the OHR starts to work properly. On the second photo you can see the location of the watch on my hand.

Thank you

sartoric

@nassoc
Missing images

nassosc

@sartoric server keeps disconnecting, trying to upload

Dimitrios Kanellopoulos

@nassosc I think there was no ohr update and I think the ohr will become more hard in the winter as temps drop. However there will be an update I think on the next batch, if finished with valencell.

sartoric

@nassosc
We (spartans) have got the Valencell update, the one you’ve already on S9

nassosc

@Dimitrios-Kanellopoulos well its not that cold here yet. will have to wait for the update and hope for the best.

Dimitrios Kanellopoulos

@sartoric correct

Dimitrios Kanellopoulos

@nassosc ok. Well more important is that there was no update at least. I mean it like dont get hopes high and start testing or complex it. Sorry to hear though that your OHR is not ok.

Unfortunatly todays running after the update was one of the worst tracks I ever had, concerning GPS (GLONASS on) and OHR. Will see how this goes on this week.

Dimitrios Kanellopoulos

lets try to hit consistency here

@Dimitrios-Kanellopoulos Yup.

Dimitrios Kanellopoulos

@paradize btw in regards to prev posts about a FW reset to “clear cache” of the GPS module, now this works with a 12s reboot. A series of horrible tracks should be helped by that.

herlas

Went for interval training (run) and it was great to be able to disable automatic laps, not hearing beeps now in the middle of the interval

Also noted that after run was done, it’s now displaying total steps for the workout, before it was just the cadence, liked it, now it’s Suunto app turn to pull that when syncing, (it didn’t)

thanks

suzzlo

@herlas said in SSU 2.5.18 - ON AIR:

steps for the workout

Same here, just interval this morning and see that for running , but not for yesterday 's Squash (cadence doesn’t make sense but steps can be good info)

I imagine that this watch info, will be catched by SA (in any new release) and reported to backend.

Happy with the FW improvements and bugfixes