Battery drain after update 2.44.46 (2025 Q3) on Vertical Watch
-
@Mff73 said in Battery drain after update 2.44.46 (2025 Q3) on Vertical Watch:
@thanasis said in Battery drain after update 2.44.46 (2025 Q3) on Vertical Watch:
. I don’t want to think that it was on purpose to promote the newer generation of the watches as I have read on some other posts in social media
If you don’t want to think, why would not not want to write it?
No specific to you only, but could one really think that (thus write it) “bugs” are introduced on purpose. Come on…(Btw I edited my post prior to your reply , but yet I think I need to clarify )
Since the new watches are currently based on the same platform you could argue that one (the people developing it ) ) does not care on the impact the implementation has on previous models because they want to promote the new ones . Not that you create bugs so that you ruin the experience on purpose . It’s an argument that you can purposely take : we need to have consistent experience hence the old ones need to take a hit on something … aka the battery life . -
Full cycle battery, 20 days with OHR24 and three activities each week (same time as usual since 2 years).
It used to be 30 days before the last update since the precedent fix drain battery issue about one year ago. -
@thanasis The battery issue has already happened a few updates ago, Suunto doesn’t want the battery to last less, they will try to fix it as soon as possible as battery life is one of the strong points of our watches.
-
@MeazzaS9 I hope so, i’m still stuck in 10% day with my vertical solar
-
@fedequei I honestly waited to update (set it to non-automatic) as soon as I read about the problem. They’re definitely already working on it.
Suunto Race S Gravel Gray (2024)
Suunto Vertical Black Lime (2023)
Suunto 7 Graphite Copper (2021)
Suunto 9 Baro Black (2020) sold -
@MeazzaS9 and where is this information coming from?
-
@MeazzaS9 What is your sources about this please ?
-
K Kramble referenced this topic
-
@OutdoorMan @Kramble These are just my considerations, but I repeat, since battery life is a must for Suunto, they cannot ignore this issue.
-
@MeazzaS9 ok, you stated it as fact so I was curious. I am not sure if I share your optimism though, but let’s see…
-
Former long-time Garmin user – I switched to Suunto at the end of last year because Garmin put me off with a lot of messed up updates and among other things the resulting high battery consumption.
And now the same thing is happening with my Suunto Vertical Solar, which I switched to because of its high power efficiency…
As I’m new to the Suunto universe, can someone explain to me if and how I can roll back to the firmware without high battery consumption? Where can I get the firmware (I can only see the last two firmware versions in the watch – and the second to last one is already faulty) and how can I downgrade the firmware of the SV?
Thanks for advice! -
I’m reading through this issue, but I’m not entirely sure I agree with what’s being said here.
Since not everyone is experiencing battery drain, how can we say the drain is deliberate?
I’m raising this issue, but let’s keep things in perspective — it’s not that Suunto wants to drain the battery faster. The Vertical 1 is Suunto’s flagship model for MIPS.
Could you please check whether the battery drain remains the same if you unpair your sensors (under Connectivity)? This was one of the main low-level changes in the latest update, so it would help narrow things down.
Thank you for taking the time to write here and report your findings — it’s appreciated!
Community Manager / Admin @Suunto
Creator of Quantified-Self.io
youtube.com/c/dimitrioskanellopoulos
https://instagram.com/dimitrioskanellopoulos
https://www.strava.com/athletes/7586105 -
@Dimitrios-Kanellopoulos Thanks for your reply.
I have just fully charged the SV and will now log the battery consumption again over the next few weeks with the current firmware. I can then compare these figures with the consumption logged at the beginning of this year (during the evaluation of the SV in comparison to the Fenix) – then I will have clear facts instead of vague feelings.
PS: I do of course not believe that these issues are deliberate! Watch software is apparently very sensitive to poor code or hidden bugs in terms of energy efficiency. -
@Dimitrios-Kanellopoulos I’ve experienced random restarts with my Race v1 every few hours on 2.44.52, which were gone when I reverted to 2.44.46 (hard reset didn’t help on 2.44.52). May the restarts and increased battery drain related? I assume the watch draws more current during startup. Could someone who has battery drain issue check for an error code in the debug menu (mine showed an error code)?
-
@Dimitrios-Kanellopoulos unfortunately yes, power drain is a thing even if I unpaired sensors and disabled Bluetooth visibility.
Something bad happened with the last 2 firmware updates on my SV1 (Finland): footpod does not work, battery drain, and dismissing notifications takes seconds. First time I complain about a FW update in years. First time I reach 4% battery.
I really hope a fix comes out soon and I’m starting to think to go back to previous FWs.
-
@Dimitrios-Kanellopoulos said in Battery drain after update 2.44.46 (2025 Q3) on Vertical Watch:
I’m reading through this issue, but I’m not entirely sure I agree with what’s being said here.
Since not everyone is experiencing battery drain, how can we say the drain is deliberate?
I’m raising this issue, but let’s keep things in perspective — it’s not that Suunto wants to drain the battery faster. The Vertical 1 is Suunto’s flagship model for MIPS.
Could you please check whether the battery drain remains the same if you unpair your sensors (under Connectivity)? This was one of the main low-level changes in the latest update, so it would help narrow things down.
Thank you for taking the time to write here and report your findings — it’s appreciated!
Hi
Yes I have tried this and it did not work, I literally tried every single “fix” that was suggested on these forums and various fb groups on mine none have worked. I’m not someone who just complains for no reason if you look at my historical posts I was singing praises for the suunto vertical more than anyone when it first come out on here when it worked properly. The solar stopped working which I can live with but the battery drain is a fundamental failure of this watch. I sent my watch to suunto repair cost me $50 who said there is nothing wrong with the battery or hardware and they claim it is only draining 4% per 24 hours!!! Yet I have approx 6 week worth of notes every morning I would record battery level when I wake up. I would get anywhere from 12-40% drain every 24 hours it gets worse as the battery gets lower below 50%. So either I’m lying or the suunto repair shop is lying???
To all the others this battery drain has been happening well before the last two firmware updates so rolling back to the last firmware won’t help you. This is something suunto must fix. Currently I’m using my old reliable ambit 3 peak which goes through maybe 2-3% battery a day and puts the vertical to shame how embarrassing. 2014 technology smashing the current stuff
-
@Dimitrios-Kanellopoulos I think we should keep in mind that this is also affecting other watches, not only V1. I have a new R2, went through multiple cycles already, tried everything and loosing around 10-20% per day without activities, just in watch mode. There are also many posts on other forums about it.
-
@gone-troppo Yup, same is happening on my 9PP, also roughly at 12% per day
-
@Dimitrios-Kanellopoulos I have paired a stryd sensor that i can not unpair. As you see on the picture below I have paired the sensor several times and therefore you see the connections that actually do not show anyting.
Additionally the watch often does a beep sound without showing anything on the watch. Usually when activated an alarm you see that is sun rise or sun set, done that many steps and so on. But the watch just beeps and doesnt show anything. I can not see a pattern either.
Since the update I have to charge the watch once a week, usually on sundays and it seems that the training amount with GPS activities does not affect the this rythm. Skiing season has not starte yet but when training 20 hours a week I maybe have to charge more than once a week.
-
@Dimitrios-Kanellopoulos
Thank you for your reply and for taking the time to look into this.
From what I understand, it seems that Suunto hasn’t yet identified the exact cause of the increased battery drain, and that’s a bit concerning.
As we can see, quite a few users are reporting the same issue, which appears to have started after the last two firmware updates.
In my case, I started noticing the faster battery drain since June, and I can confirm this with all my recorded charging cycles.
I also tried the suggested solutions, including unpairing all Bluetooth devices, but unfortunately it didn’t make any difference.
I really hope this can be investigated further and that a solution can be found as soon as possible.
Thanks again for your time and support. -
Alright. Time for logs
Press send logs via the Suunto app and send me a message here with the email used for the Suunto app account. Try to send the logs at a relevant time if this is applicable.
