Software Update 2.43.8/.12 (2025 Q2)
-
@sryke hm okay. Todays Run with Suunto RACE with 2.43.12 with no bugs.
-
Most drops are failures, I did compare it to the Stryd fit file data.
And you’re certain that this is really the Stryd pod power stream? Everytime I do not see any drops in the data is when I get an overall different wattage in the Suunto and Stryd files. My assumption is that the Race S sometimes does not read the stream from Stryd but uses its own wrist estimated power. Despite having a connection with the pod.
-
@sryke i dont have a stryd pod. Its suunto Measurement
-
@sryke said in Software Update 2.43.8/.12 (2025 Q2):
Most drops are failures, I did compare it to the Stryd fit file data.
And you’re certain that this is really the Stryd pod power stream? Everytime I do not see any drops in the data is when I get an overall different wattage in the Suunto and Stryd files. My assumption is that the Race S sometimes does not read the stream from Stryd but uses its own wrist estimated power. Despite having a connection with the pod.
@sryke this makes me curious about the comparing the power algorithm between Suunto and Stryd. I might do a test run without connecting both and see how they differ.
-
I was looking into a recent trail activity and saw Strange gps drifts which reminded me of the drifts some are referring to in swimming . Indicating a couple of them but the there several of them during the trail
-
@thanasis if its in the woods you may get choppy GPS signal, did you enable dual band GPS ?
-
@thanasis I had something rather similiar on a sunday MTB Ride.
I wanted to follow a route that I had recorded with the 9PP.
The routing was way of most of the time, first I thought maybe I took another trail but no, the route was running parallel in about 20-50m to the Breadcrumb. Sometimes the route and Breadcrumb lined up but then they drifted away again.And I have strange looking loops even when there is no wood.
I did do a trail run on Monday, again testing with a route recorded before and it lined up perfect and there are no loops even while it was raining and the trail runs deep in the wood.
Here is a part of the Sunday MTB ride - it is really strange cause normally everyting lines up perfectly and you can even see tiny circles or 8 I ride sometimes.
This time it looks like I rode through sombodies garden.
I did sync the watch couple of times before because I had problems getting the livetracking S+ app connected.
As it was okay on Monday I almost start thinking - someone played with gps.
This is from my ride today. Everyting looks perfect again:
-
@Elipsus it’s on performance - so I assume yes
It’s the first time I observe anything like it . Have done other trails and with the vertical and also 9peak and ambit 3 peak without any such an issue .
-
Double```
code_text -
9PP HR monitoring stoped working during a night and didn’t come back
Restart helped but I am going to rollback to the prev. build.I’ve also noticed that the screen turned off several nights ago
Might be a good optimization weren’t that being a bug. -
Bug or intended?
Today I wanted to use the new “track running” sports mode. I also wanted to choose a Suunto plus Guide(TAO workout) but it wasn’t available.
Trying other sport modes i could choose the guide but in “track running” mode no guides were available, only Suunto plus apps.Is it a bug or is there a reason for it?
-
@Egika said in Software Update 2.43.8/.12 (2025 Q2):
@Kaiphi said in Software Update 2.43.8/.12 (2025 Q2):
I noticed a mistake in the sport mode mountain bike downhill. When I start the activity, it shows me the duration, but not the depth meters and distance. These remain at 0. After exiting, however, everything is displayed. Does anyone else have that?
I had the same today on two out of 3 watches.
The third one showed all data correctly.
Reported it to Suunto
Thx!Is there a statement from suunto until when this will be fixed? Was back in the bike park for the weekend and the problem still exists
-
@Sergey-Balbir It hit me tonight after 1 1/2 months without issues.
So it seems that this bug is back again. HR and OX sensors stopped working.
No sleep was tracked.
After the restart, the 9pp said I slept form 23:59 to 10:14 in the morning.I will keep going with the current version until it happens again.
Not sure though if it makes sense to contact Suunto support to file a bug and send logs.
-
Very strange!
I also had a failure in sleep tracking, after a long time, during my nap this afternoon.
In my case, I didn’t need to restart the watch; after my nap, it was working fine again.
-
Suunto, you doesn’t fixing bugs.
Roller skating mode. One year ago I reported to you that altitude estimation doesn’t work there. One year ago it was on 9PP. One of your moderators replied to me and confirmed the problem.
Now in one year exactly same bug on Suunto Race S. Elevation is zero:
You have so many bugs which you dont fix, despite you know. For example, this watchface and time - graphical bug (rectangle zone around the timer):
Despite you should be aware of it, because when I reported about it few months ago, one of moderators confirmed bug as well.And tons of bugs in swimming which are not fixed for 2 years, only new added
-
@Александр-Даниленко said in Software Update 2.43.8/.12 (2025 Q2):
You have so many bugs which you dont fix
I may be wrong, but I strongly suspect that in the last year nearly all Suunto development resources went into a new OS for Suunto Run and the new watches that will be released soon. Fixing bugs for the older OS doesn’t seem to be a priority and seems to have been neglected. I have reported multiple bugs too, and none of them have been addressed or even acknowledged other then mods mentioning that they have reported them.
I will not buy a new Suunto unless at least the issue of trail rendering on the map is addressed.
