Race misbehaving in multiple ways
-
I was trying to use the ZonSense S+ app on my SR the first time today. I vent out ton the trails, set up the watch with route navigation enabled, and activated ZoneSense. I also had Ultra Walking activated. I started the activity and realized I forgot to set a target HR zone, so I paused the activity and set that. This was within the first few minutes of the activity. The ZoneSense app didn’t display much data, I assumed it was because of the 10 minute period to get HR stabilize. But even after 10 minutes the app didn’t show my zone. It didn’t show NGP either. Then I realized, that the HR zones ring around activity data displays is stuck at green. In addition, my route selected for navigation was 32k but the navigation display showed much less. When I reached the end of remaining distance shown on the navigation screen, the route was reset, showing the total 32k to be ahead of me. The route I ran had crossed itself at two places, and my starting point was one of those points. This may be a contributing factor to the navigation display issue. I haven’t experienced this before, not even with self-crossing routes. I don’t know if these issues are inter-related, or related to pausing and enabling HR target mid-activity, might be. The issues with HR zone ring and ZoneSense seem to be related. Anyone experienced anything like that?
I sent the logs to Suunto, I would be thankful if forum moderators could help to report this. I took some pictures about the issue:
-
@halajos Sorry for the question
Did you use a suitable heart rate strap? -
@Danny-poleg said in Race misbehaving in multiple ways:
@halajos Sorry for the question
Did you use a suitable heart rate strap?Yes, of course. And I have ZoneSense post-analysis in SA.
-
H halajos referenced this topic on
-
Apparently, I’ve got increased battery drain during the night after experiencing this error.
-
H halajos referenced this topic on
-
I did a couple of tests and was able to reproduce most of the issues. I think there are two bugs.
- When ZoneSense S+ is used together with UltraWalking S+, then ZoneSense doesn’t show the time spent in each zone (showing – instead).
- When ZoneSense S+ is used together with target HR zone, then the coloured circle around exercise data display and the arrow indicating the current HR get disconnected (colored circle gets stuck).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login