SOFTWARE UPDATE 2.35.34 Q2
-
@sartoric i have a solar vertical.
backlight is off since day one, good suggestions for others though.sincee than, I have restarted the watch, will see.
-
I ‘may’ be in the minority but on the prev firmware I hardly ever tapped the little icons to switch through different data on an hourly or daily basis.
I find the current update with the added options and detail loaded in much much better.
@JimUSGA said in SOFTWARE UPDATE 2.35.34 Q2:
This seems like an easy problem to solve. All the data fields are already there, so just let the user select which ones they want to see in the configuration screen. When they tap the watchface, it should scroll through the data they care about.
This is a signature feature of all Suunto watches I have owned in the past 14 years. To just discard it like they did in this update is infuriating.
-
@mikekoski490 I initially didn’t like the change on the watch face. But a couple of days in and I’ve got used to it.
For me it is a minor thing anyway. The other improvements, particularly the count down to the next waypoint on the map is excellent.Excellent upgrade Suunto.
-
Speed limit for autopause is still to high since last update (Q1/2024). For this reason, I have to turn off this function for ski touring and trail because the movement speed is too low during steep climbs with many turns during these 2 activities.
Related to this, does anyone know what the speed indicated on the watch is? By that I mean, are only longitude and latitude taken into account or also elevation? Because I was moving flat at the same speed indicated by the watch as when going up a steep slope and I had the impression of being stationary.A suggestion for improvement: Would it be possible to deactivate step-by-step route tracking directly on the watch? I often want to deactivate this function when recording because the directions are not necessary throughout the route.
-
@Audaxjoe yeah same here. I started to really like the new watch faces. I’ve set one up with info I use often and want to see on my watch face. Then I cleaned up my list of widgets and now i think I actually use complications and widgets more efficiently. Well done Suunto!
-
Did someone notice that long press on a complication on the Wf brings you to the details of the complication ? For example long press on tsb open the tsb widget
This is nice, for me I did not miss the previous version I did not use tap on complication or rarely
I think we have lots of improvements and the battery is mad now: before I charge my watch during my shower and it charge the 10% I used per day (more than 1h of gps and 1h of indoor bike) now this takes only 6% per day (and I have aod enabled during running… )
It’s always funny that people complain when things did not change, when they change, when you communicate, when you don’t (I manage a 40k users IT environment so it remind me my job)
Also when I read : this is not complicated to implement, man you have no clue on potential difficulties that a change could bring…
Anyway, I feel happy, I love my watch more and more, thanks Suunto ! -
@duffman19 said in SOFTWARE UPDATE 2.35.34 Q2:
Had to get a run in to test the new features even though it’s a rest day (nearly tripped several times looking at the watch so much!).
Settings: Suunto Vertical, Trail Run, Performance battery mode, navigating route, SuuntoPlus Loop-Pace, Climb Guidance on, external HR belt.
Navigation:
- Turn-by-turn notification timing still hasn’t been updated. You still receive a notification for the NEXT turn when at the CURRENT turn. Can anyone explain the reasoning behind this??
- The new “tooth” window with upcoming info is great. The arrow icons are very tiny and maybe a shade too grey on the Vertical.
- However, what’s the point of the info in the “tooth” if it is completely covered by a full screen alert with info for the NEXT turn when you reach the CURRENT turn? It’s just confusing when you’re chugging along and reach a fork and the watch says “Turn Left” in giant letters when you really need to turn right. I know there’s a first alert before reaching the turn, but the second alert should correspond with the turn you are currently at. Please, please…
- When navigating a route backwards, the turn notifications now seem to correctly update! Lefts become rights. Rights become lefts. Straights stay… straight. It’s wonderful!
Climb Guidance:
- This works quite well. I like the simplicity.
- I did NOT receive pop-up notifications when approaching climbs. I had to navigate to the climb/altitude screen myself to view it. (Edit: This is expected behavior. Notifications are only for red “Climbs” and green “Descents,” and not orange “Uphill” or turquoise “Downhill”.)
- Climbs also reversed when navigating a route backwards! Ups became downs. Downs became ups. Wonderful!
- The expected ascents and descents were pretty far off (way short of what they actually were). This may be route specific or just bad background info for my region.
SuuntoPlus:
- The Loop-Pace app I was using did not work correctly, or at all, really. I normally wouldn’t use this while navigating a route, but I was trying to test everything at once.
- I think it marked laps, but I did not receive an on-screen notification with lap info. I did feel a buzz, but no verification of a lap marked. I ended up marking them manually instead.
There may be a correlation with why I did not receive Climb notifications as well.
GNSS:
- I had a substantial GNSS error toward the end of 3 of 3 hill/loop repeats. You can see below where it decided to wander off. It added about .15 mile to my final distance. Took almost a mile to get back in line.
- AGPS was up-to-date and I “soaked” for a good 5-10 minutes prior to starting the activity.
- I had a similar error earlier this week, so probably not related to the update.
Full screen alerts are most annoying thing about navigation, also those about getting out of track or getting back on track or the whole sequence of out/back/out/back/etc alerts… all one by one are covering map for so long so you’re unable to figure out where you are or how you could correct your course. It especially annoying when you can’t be pushing buttons to ack alerts over and over (i.e. while downhill mtb or backcoutry skiing)
I had a lots of hope in data tooth new feature, thinking they’ll use it to show navigation alerts in some shorter form only in this area so they won’t cover map anymore. But again hope led only to disapointment -
@Majkel-Paszeko don’t lose faith I’ve seen a review were it say that full screen notification will be fixed in a fix where the alert did not hide the whole screen https://youtu.be/8YhuJLdqEI0?si=2U0FZ1fmDgOiewrF (French reviewer) @2m58
-
Since the update I have had the problem that my heart rate measurement stops. The LED is off and I have to restart the watch. Does anyone know this? I have the 9pp
-
@mikekoski490 said in SOFTWARE UPDATE 2.35.34 Q2:
I ‘may’ be in the minority but on the prev firmware I hardly ever tapped the little icons to switch through different data on an hourly or daily basis.
I find the current update with the added options and detail loaded in much much better.
Actually you are not in the minority, just the people who prefer the status quo are louder and more prone to voice their opinion
It is a standard change process, that in this case came a little unprepared for most of the users.
-
@Dimitrios-Kanellopoulos
After the last update, a small problem with the DI2 feature in SuuntoPlus was not fixed, it is still necessary to activate the sensor every training and perform a scan to locate it. -
@Danny-poleg said in SOFTWARE UPDATE 2.35.34 Q2:
@Dimitrios-Kanellopoulos
After the last update, a small problem with the DI2 feature in SuuntoPlus was not fixed, it is still necessary to activate the sensor every training and perform a scan to locate it.I think this has to be like this as it depends on how S+ connect to BT devices. The connection is not saved like other BT pods.
So S+ always need to reconnect every activity. -
Title : Bug with the new pause screen if you start moving while paused
Brief Description : while cycling I paused the exercise . I thought of pushing continue but It seems it didn’t . While I reached the end destination The watch showed me an indication that it detected movement and if I want to resume which I did and the watch returned to the previous screen . The watch showed the buttons of continue and stop . The bottom button did not stop the activity but increased the lap count continuously. Stoping the activity required to enter the menu for multi sport by long pressing the top button and then reverting to the previous screen
-
@Egika
Strange, I connected my smart trainer to the watch once and I don’t need to renew the connection before each workout and in my opinion electric bikes are the same -
@thanasis said in SOFTWARE UPDATE 2.35.34 Q2:
Title : Bug with the new pause screen if you start moving while paused
Brief Description : while cycling I paused the exercise . I thought of pushing continue but It seems it didn’t . While I reached the end destination The watch showed me an indication that it detected movement and if I want to resume which I did and the watch returned to the previous screen . The watch showed the buttons of continue and stop . The bottom button did not stop the activity but increased the lap count continuously. Stoping the activity required to enter the menu for multi sport by long pressing the top button and then reverting to the previous screen
I confirm this. To work around this, when movement is detected I just hit “stay paused” and then resume the activity and it works. Or you can pause 2x times/resume 2x times and the “visual bug” disappears.
This only occurs after movement is detected. And if you are in the city… this can happen often.
-
Bonjour à tous depuis la mise ma suunto vertical solaire consomme énormément de batterie environ 6% par jour et je reçois des messages batterie faible alors que la batterie et à 78% je l’ai redémarrer et était mais rien y fait suis-je le seul à avoir ce bug merci
-
@Danny-poleg said in SOFTWARE UPDATE 2.35.34 Q2:
@Egika
Strange, I connected my smart trainer to the watch once and I don’t need to renew the connection before each workout and in my opinion electric bikes are the sameIs the smart trainer also connecting to an S+ or did you connect it as a bike pod in the connectivity settings?
-
Since the update, I no longer have sleep tracking on 9PP. Someone else noticed this ?
-
@fondueaufromage said in SOFTWARE UPDATE 2.35.34 Q2:
Since the update, I no longer have sleep tracking on 9PP. Someone else noticed this ?
No, accurate as before the update.
-
What a disastrous update.
I have a watch face I didn’t want which the watch defaults continues to default too. Cannot change by touch when I do recover my old face like you used to be able to. Did a warm up today and then on the start line for a race and my watch goes blank and goes into safe mode.
I was a loyal customer of Suunto for years but got increasingly frustrated with this type of software issue. Finally came back with the vertical titanium and here we go again.
Come on Sunnto you can (and should) do much better. They will be asking us to manually wind our watches next!
One very frustrated customer.