Shimano E-bike systems
-
@ttsirkia I’ve updated SuuntoPlus Shimano app to yesterday’s version (6.05.2024, 10:26) and everything is working fine.
-
@kuba1234 I just can’t get this working… I checked that i have also newest version but how did you connect this? Or is the issue really that i cannot connect same time for Android device?
-
@MikkoKartano After updating I still had the connection issue. Then I realised that my watch was connecting to my indoor trainer and it seems that only one Bluetooth connection is allowed for wath. The same may be with the bike. Try to turn off the telephone and try with the watch. What is important you have to pair the watch within 15 seconds after turning on the bike
-
Unfortunately I have still the same problem with the new version that the watch cannot connect to the bike although the BT symbol becomes visible in the bike’s display.
-
And where is the E-Bike sport mode?
It would not be too stupid to have a differentiation on the sport profile level (not only via tagging). -
@ttsirkia Ok so in my case it sometimes works, sometimes not. starting bike and activity on watch several times helps… and turn off phone bluetooth. Hope next updates will make it more stable.
-
Ok… But in practice, how this connection should even work? Just start the activity on watch and turn on the bike? Or should i try to connect bike as a external sensor for watch, or something else…
-
@MikkoKartano Here are the steps I did just now to connect:
- In Suunto I chose the type of activity (mountain biking)
- I didn’t click start but clicked Suunto Plus
- I turned on my bike with power button
- In Suunto I chose E-Bike Systems SHIMANO
- Several times it failed so I repeated step 4 until it worked.
- then i went back and started exercise:
- I am wondering what happens if you turn off bike for example for charging and want to continue the same exectise later… will watch reconnect automatically?
I hope they will correct all issues within month and everything will start working smooth as with garmin watches.
-
@MikkoKartano said in Shimano E-bike systems:
Ok… But in practice, how this connection should even work? Just start the activity on watch and turn on the bike? Or should i try to connect bike as a external sensor for watch, or something else…
have you tried to follow the written instructions of the app?
And yes - ony one device can connect to the Shimano wireless unit:
-
@Egika Yep, and it does not connect. I did put my mobile phone to flymode just to be sure that it dont try to connect bike.
Bluetooth icon in bike seems to be visible when clock tries to connect but it fails every time. But at least i know now that i’m doing everything correctly.
FYI, my bike has Shimano EP8-motor and SC-EM800 screen.
-
@MikkoKartano I don’t have much to add to the instructions by @Egika and @kuba1234 . Connecting SuuntoPlus app to bike should work as long as bike is powered on, and there is no other Bluetooth connection (e.g. Shimano mobile app) to the bike. Setting bike to Bluetooth pairing mode should not be necessary, but you could also try that. I’m not sure if pairing mode exists in all Shimano devices, so you might not have it at all.
If bike shows Bluetooth icon, watch finds the bike, but Bluetooth connection fails for some reason.
If you can’t connect your watch to the bike, or if connecting requires multiple tries, you can send logs to Suunto from Suunto mobile app, and then send email of your Suunto account to me as a private message. We can then check your logs to see what is happening.
-
@Raimo-Järvi Hi! So my bike sometimes connects but in most cases I require multiple times to connect. The bluetooth icon appears, I wait for ~10 seconds and I have connection error. repeated it several times now and I couldn’t connect at all. I’ve sent you my logs (email: kuba1234@gmail.com). Thanks for your support, please let me know what is the issue.
Btw, I have one more question. If during workout I turn off bike (and the workout still goes) (eg. for battery charging or for pause) then after turning the bike on watch will reconnect automatically?
-
I tried to connect again yesterday, watch gave same error message and i did give up… However when i was starting activity, i noticed that watch was connected to bike and it worked.
This is great app as it shows also battery % which Shimano apps / screens dont… @Raimo-Järvi i sent new logs if you want to take a look of those.
-
@kuba1234 and @MikkoKartano Thank you for the logs. You both have a similar issue where watch connects to bike, but is then disconnected and connected again repeatedly. We made a small fix to the SuuntoPlus app, let me know if it works better now.
Watch should reconnect to bike or any other Bluetooth device after you turn it back on, or if you have been out of Bluetooth range.
Pragmatic Programmer
-
@Raimo-Järvi Hello! Thanks for your help with new software version. After update my Vertical connects with no issues to the bike. However now no data is transferred to the watch. During my ride only speed was displayed all the time.
I tried then at home several times to reconnect and:
- 3-4 times there was only speed or completely no data
- one time there was all the data except speed
lack of speed is probably because weak or no GPS signal indoor.
I’ve uploaded my logs again.
Thank you very much for your great support!
-
I tried with my bike now with this May 14th release. Earlier, the watch couldn’t connect to the bike at all (although the BT icon appeared in bike’s display) but now I see the watch gets the connection for one second, loses it, connects again etc.
I need to debug this more tomorrow.
PS. I have E-Bike with Di2 electric shifting, how the both could be applied or could E-Bike also collect the gear information in the future?
-
Since yesterday I am the owner of a Suunto Race, installed new firmware and everything is set up.
After several attempts, the watch connected to the bike.
But the clock showed nothing except speed.
Everything back to factory settings and the whole thing again.
What I noticed was when I reconnected. The BT signal was briefly interrupted. So I tried the whole thing several times and in the end it worked -
@GPpov said in Shimano E-bike systems:
Since yesterday I am the owner of a Suunto Race, installed new firmware and everything is set up.
After several attempts, the watch connected to the bike.
But the clock showed nothing except speed.
Everything back to factory settings and the whole thing again.
What I noticed was when I reconnected. The BT signal was briefly interrupted. So I tried the whole thing several times and in the end it workedThis is what the whole thing looks like now
-
Yep… Now it looks like watch and bike connects but watch shows only speed (witch propably is not coming from bike?) Maybe i will also take a fresh start for watch and reset it.
-
@MikkoKartano You’re right, speed is not coming from bike. Watch and bike connect initially, but then Bluetooth keeps disconnecting and therefore there’s no info shown in watch. I still don’t know what causes the disconnections, and resetting your watch may not help with it (but I can’t be sure).
