[Watch] SSU : altitude changes with temperature

[Mff73]

@sartoric said in [Watch] SSU : altitude changes with temperature:

Maybe there is something wrong with GPS receiver (or the accelerometer ?).
Also the average speed changes significantly

Hi,
My video was made indoor, so GPS was certainly awful.
But this phenomenon is totally the same than when I am really outdoor for activity : pause in movement (but not a pause in recording activity).

Hi @Dimitrios-Kanellopoulos , thank you for reporting, and I can send you fit files for my last faulty move and my wife’s one to compare if needed.

[Mff73]

@Dimitrios-Kanellopoulos said in [Watch] SSU : altitude changes with temperature:

Looks like a problem I need to report!

Hi,
I can reproduce my issue 100% times.
I have just unworn my watch from my wrist, altitude was 520m, 1min after, 530m.
And when put watch on my wrist ragain, 30s only after and altitude id 520m again.
All that on watch mode.

Should I open à ticket ?

[Dimitrios Kanellopoulos]

@Mff73 Hey hi! !!!

Can you shake it? It should change then as well and that is a pressure sensor issue.

I just now did the test with running and my Alti changed 1m only and that was due to GPS alti.
Take a Look:

This is a 5m pause.

IMHO it looks like a faulty sensor or the sensor got dirty etc.

I had my dad watch with the same issue. These are the tests I did:

• I shaked it and changed alti.
• Make sure you shake it in a way that you “bang” the pressure sensor grill on your palm. That should shake the sensor vertically and change the altitude.
• Temperature as only it self should not matter.

But there is a solution as well.

Hot water at ~35 and:

• Leave it in a glass or have it running constantly on the pressure sensor grill under the tap.
• Flush again
• Very soft toothbrush if there is debrys.

If the above do not help then please ask support.

PS. If you are leaving in a humid area that affects even more a ‘dirty sensor’

[Mff73]

Thanks for tips.
Shake this evening and no effet, but I am waiting for after shower revival
Yes, another symptôme, after shower, or hand in water, altitude decrease by around 80/90m, and stay constant during more than 2 hours.

Will try thé warm water and see.

[Dimitrios Kanellopoulos]

@Mff73 the water gets in? Then its normal.

[Mff73]

@Dimitrios-Kanellopoulos
Yes, but 2 hours to get out
If I put my old ambit 1 in water and Shake it, I retreive good altitude in à couple seconds.
With my SSU, now, whatever I do, I have to wait.
For now, watch is in warm water. Let see.

[Dimitrios Kanellopoulos]

@Mff73 oh. Something is funky. Mine comes back at about 30m Max after poool swimming 1hour. Both s9 and ssu. From what you say looks kapot.

[Mff73]

Hi folks,

My ticket is on the way

Let’s wait and see, I will let you know

[valdis830]

Temperature affects, but I think not so much. Around 0.6 m for each degree ??

[Mff73]

@valdis830
I think the same, but, it is the only parameter that I think is modifiés when I just put my finger behind thé watch.
No news from support for now.

[Mff73]

Support answers me to restart watch and let it on table for a day (for électrostatic reason) and if nothing better, send it to Finland.

My SSU is on the way to Finland
Wait and see : repair/replacement or maybe they will find nothing

[Mff73]

No news from Finland, but since then, I re use my Ambit 1, and Altitude doesn’t change without any reason, and after shower, just shake the watch to make water out sensor, and altitude becomes correct (more than two hour with SSU).
I wait eagerly my spartan to come back to see how it works

[Dimitrios Kanellopoulos]

@Mff73 try blowing gently air in the spartan. It takes then 1minutes.

[Mff73]

@Dimitrios-Kanellopoulos
Will try as soon as my SSU come back from Finland

[Mff73]

Hi, Suunto receive my watch, let’s wait 7 days from now :), but UPS said that it has been delivered on monday, so repair delay is calculated from when Suunto decided to registered the delivery
No matter, i am quite happy with my old Ambit, it is so reliable, just old fashion, no bluetooth, charger is a pain to clip, buttons have some arthritis , no fusedalti, but descent/ascent is spot on, and no difference between start/end of move.
Wait and see.

[Dimitrios Kanellopoulos]

I am reading in anxiety in every notification I get from this post. Good morning pal.

[Mff73]

@Dimitrios-Kanellopoulos
My only anxiety is that Suunto techs find nothing wrong.
But I send them à link of my video where I show that altitude lost 10m on a few seconds, just putting fingers behind.
In Suunto techs I trust.

Please @Dimitrios-Kanellopoulos , do not put too stress on you regarding my or others issues

[Dimitrios Kanellopoulos]

@Mff73 have another user with same issue let’s see.

[Mff73]

Just receive my new toy. Some driving to do towards week-end location, some drinks with friends there, and I will be ready to test

[Mff73]

Hello,
No vidéo to share, none of my test managed to change à single meter of altitude : neither fingers, nor température (reasonnable).
My new precious is perfect, old one was defective.