Automatic alti/baro really needs attention

[isazi]

@renton82 maybe because users will forget about that, and then complain that “my watch does not record altitude, duck you Suunto”

[freeheeler]

interesting post… I received a storm alert when I came back home after a nice MTB tour while sitting in the sun on the balcony… no bad weather came in, just few clouds.
yesterday evening I did not receive any alert and my entire neighbourhood looks aweful… cars in golfball shape without windows, cracked windshields, roof tiles broken or completely gone, completely cracked roof windows etc.
this would confirm the slow vs fast changing pressure setup

[sartoric]

@freeheeler Basically, if you see it coming you won’t get an alarm

[vgnjhd]

i guess for now we need to rely on knee pain

[Efejota]

Interesting post, particularly the reference to storms not coming with significant pressure changes. My experiences in last weeks with my S9B is that the storm alarm is not working really well. We had several storm episodes in the area lately (a couple of days with really big storms and rapid and big weather changes) and in none of them the alarm triggered with different scenarios (the watch standing by me on my desk, on my wrist, walking or in a car). I wondered a lot why, but the fact is that the alarm never started in any of those cases (at least, five different episodes)

[surfboomerang]

@efejota Just to be sure… you did turn storm alarm on in the settings?
If so, the watch should trigger an alarm if the pressure drops with a rate of 3-4 hpa per hour.

[Efejota]

@surfboomerang yes, I checked it to be sure.

[nikshot]

@efejota Hello, and five days ago (Saturday) I had a terrible storm, with lightning, a hurricane that knocked down many large trees and caused great damage to many places across the country, in some places there were floods with destroyed crops, broken walls of houses, removed fences of yards, etc. The same day (before the storm started) my girl and I were high in the mountains (2500 m), planning to spend the night at this height in a tent! Although, my storm alarm is always on, I checked just in case because the weather forecast was for light rain! Until late afternoon we were hesitant to stay at 2500 meters for the night, relying on my Suunto 9 Baro Titanium that if something scary is asked it will inform me (as my Ambit 2 Sapphire used to do)! But my S9B does not react in any way! We stood on the roof of the mountain and watched in the distance as the black storm clouds set in, and my S9B seemed to have swallowed its tongue. I was wondering who to trust - my eyes or S9B. In the end, reason prevailed and we quickly moved out of the mountain as the storm hit us hard! When we were already traveling by car, the storm was in full swing. We crossed the whole country, as the storm was moving with us, it was scary, trees were falling on the road we were traveling on … The next day we saw the whole balance of the past storm on the news … I don’t think if I had trusted the alarm of my S9B and we were left at 2500 m in a tent, imagine what was there!

[Egika]

@nikshot @Efejota
comparing a storm event with the watch triggering an alarm does not help.
Can you please share the pressure information for the specific location and time, to see if the conditions where so, that the watch could detect it…
The watch is no weather station, the only information it has, is the barometric pressure.

Cheers

[nikshot]

@egikaI can only show this photo which was taken on the same day at noon, when the weather was beautiful and there was no sign of what would happen a few hours later, but here I notice that the pressure has changed dramatically by 8 points (1020 hPa- 1028xPa) without the alarm responding!?!

[isazi]

@nikshot well, it increased, the alarm is for a sharp decrease

[nikshot]

@isaziI’m sorry I didn’t check the pressure value a few hours later when this happened, do you think it happened without a change in pressure?
Before (A photo I took around noon ) :

After (The video is not mine) https://www.youtube.com/watch?v=If5WCGxtkIM

[isazi]

@nikshot I’m just saying you showed a pic that does not mean anything. You show the pressure going up, and complain you didn’t get an alarm. It’s like saying you press up on the elevator and complain you didn’t get to the ground floor. Go on the internet, look for the pressure at weather stations close to where you were, and measure the drop.

[nikshot]

@isazi See this now a few hours later (video is not mine): https://www.youtube.com/watch?v=If5WCGxtkIM

[nikshot]

@isazi Or this::
https://www.youtube.com/watch?v=vfqNnn5R6Rk

[isazi]

@nikshot I don’t doubt there was a storm, I can read newspapers. I’m just telling you that I have no idea why you didn’t get a storm alarm (I get them for major storms), but that if you want to know why you need to check the data of weather stations in the area and measure the drop. Not YouTube, that’s not a weather station

[Egika]

@nikshot like in the screenshot from desertkie20 here in this thread.
There no big pressure drop was to be measured, still a storm went through. Nothing a watch could do here.

[surfboomerang]

@nikshot If altitude is calibrated by FusedAlti or manual it can also cause this jump in pressure. In this case the alarm won’t be triggered.

[nikshot]

@surfboomerangIt is not touched

[matteo_000]

For my experience you can not based only with “storm alarm” functionality. It more important to read the baro/pressure information about the evolution of last 24h.

For this I would like to see the baro graph evolution for the last 24h (like in the old Suunto Core) and not only 12h like now.

So also the arrow indicators in the baro clock face, it not help because for me it’s too much sensitive.

I hope in future feature release…