Future S9 firmware wishlist summary
-
I would really like adding the shortcut to the airplane mode in the shortcuts menu I usually turn off the BT radio at night when I sleep or when I do not want to receive notifications and the steps I have to take to disable/enable it are too much imho.
-
@hristijan-petreski why not use DND mode for that?
-
@pavel-samokha for one DND does not disable the radio emitting, secondly I do not have every-day’s meeting in the same time during the day so to enable it. I use it at night but that is that.
-
@hristijan-petreski you can enable/disable DND any time via shortcuts menu, just saying
-
@pavel-samokha I know But I may not have been clear enough. I do not mind the notifications so much as much as I like to reduce the emission around me. I know it is minor but it is close to you especially when you sleep and you have your hand near your head for example, etc. There is the wi-fi, the philips hues, the netatmo sensors, other BT devices and all this combined results in increased radiation (not to mention the neighbors wi-fi and devices). For example in garmin forums one guy measured the radiation of the fenix 6 (if you do not toggle airplane it emits wi-fi, bt and ant+) and found it to be huge. So I was just trying to find a fast way to disable the BT radio.
-
@hristijan-petreski may your provide links for “that guy’s” measurement? I wonder what exactly did he measure. Bt and WiFi frequently ain’t your typical gamma rays, so one won’t become hulk overnight.
-
@hristijan-petreski I’m not telling you what to turn on/off, but just saying - humans shouldn’t be affected by these frequencies. It follows from “common sense” as well as from inconclusive research trying to prove otherwise
-
@дима-мельниченко Yes I will try and send this later it was in some sub-question not directly aimed at the airplane mode and radio emission. Basically it is what you say that the emission is surely ‘less’ than a mobile (I might used the wrong word ‘huge’ in my previous post) but nevertheless I just expressed my opinion to turn it off/on.
-
@hristijan-petreski nonono, I don’t mean that it’s less or more than that of a phone(it indeed is, but that doesn’t matter now). I’m saying that it’s all about frequency not intensity: only UV frequencies and higher may be harmful to humans.
I suppose “harmfulness” boils down to DNA damage which may cause cancer. In this case imagine your trying to shoot tennis balls through a key hole: it just won’t fit. That’s the same with low frequency photons and DNA. Very very roughly of course, I’m not an expert on this subject and may be wrong, it just doesn’t make sense. -
@дима-мельниченко You are enough of an expert it seems but you are correct. There are other biological activities that could be affected by long range frequencies and those include the electrical gradients across cell membranes (how nerves conduct and how your cells generate energy) but those are not going to be affected by radio frequencies.
-
Non ionizing radiation consists of photons that carry too little energy to knock electron off an atom, all absorbed energy is therefore converted to heat. Your bt wifi or mobile radiation would heat your body by a about a very small fraction of what sun wave does to you. To do any harm you need photons that are less than 124nm wavelength or more than 10eV. To compare middle spectrum of visible light (about 500nm wavelength) and bt or mobile or wifi is several cm. Energy carried by photons of bt wifi or mobile device is roughly 120-240 thousand times weaker than green light. Green light is about 4 times weaker than ionizing radiation. It does not matter if it is 1Million watts or 10mW, if it does not knock electrons off an atom only result is heat. If your watch, mobile, microwave does not cook you, you will survive.
-
@stromdiddily very good idea . Garmin just released a new sport mode for the Enduro watch which is the direct competitor of s9 line (but from 80 to 300 h autonomy vs 25 to 170 h)
Ultrarun Activity:
Rather than selecting a run or trail run activity, we’ve added an ultrarun activity profile to Enduro that includes a built-in rest timer. If you’re running in an ultra race or marathon, you’ll be able to utilize the rest timer and log the time spent at aid stations — so later on, you’ll be able to see exactly when you were running and when you weren’t.
I think it is a good idea for suunto as the brand has a long battery life strategy for long activities. And this is not a complicated function just laps markers .
-
Navigation screen feature request: A dual swipe menu
Since the S9P has a full round screen instead of the S9B which has a flattened part at the bottom, it crossed my mind how we can benefit from this “extra” space at the bottom. Noticing the rotating information if you go into navigation settings, I thought it would be great to see that rotating information all the time without the menu blocking the route view.
So the feature would include 3 views of the navigation screen controlled by the number of times you swipe up or down.
Default: Full navigation screen
First swipe up: Permanent menu part on the bottom with pre-determined fields which auto-rotate or (even better) customizable datafields. Stays active while selecting different screens.
Second swipe up: Full navigation menu optionsAnd swipe down for the reverse order.
This way the person can choose for itself if it wants to see the whole route or a flattened bottom part, but with some extra information.
-
@surfboomerang Great idea
-
@surfboomerang ETA there would be AWESOME
-
Wish Item:
An option to automatically lock the watch after starting an activity -
@frederic
whaaaaat? auto lock? your wild fantasies go beyond far -
Power off option like peak have in general settings. Time to rest.
-
@frederic I prefer the way it is, easy to lock if you want to. I do not want an autolock as during interval running I would forget and miss an interval. The watch is so easy to lock why is this an issue?
-
@brad_olwin I am not saying to have it locked at all times. I was just asking for an option to lock (or not… your choice thanks to a toggle) automatically upon the start of an activity. By default, I always lock my watch and unlock it when I need to. But that’s just me I guess.