Software update 2.12.30 Staged Release for S3/S5/S9

[chrisc92]

safe is a great function, too bad it is not standard feature and has to be activated before the activity. Also if you have a failure and activated another suuntoplus option, there is no way to see this screen.

[Maryn]

@chrisc92 good point

[Dimitrios Kanellopoulos]

I like to share something with you guys. Safe is a must to be enabled anytime. Among other S+ (also perhaps weather).

We do plan for this to happen and were planning to deliver with this release but testing took so long to cover real life exceptions.

[markytarky]

@Dimitrios-Kanellopoulos great to read that. Finger crossed for you guys to deliver this as soon as possible for all of us.

[isazi]

@Egika @MiniForklift the manual setting of the first day of the week works only if you don’t sync time between phone and watch.

[sealion.hr]

Kudos to Suunto for the latest FW update. As a long time Suunto user (ever since Ambit 1, SSWHRB and now S9B plus D6i for diving) I would say this is single biggest update I can remember. This update really caters to 90% of consumers. The remaining 5-10% are perhaps those wanting structured (complex) intervals as example. Now with Loop and Sprint add-ons I have a very viable alternative to those intervals.
A very important factor I like and prefer a Suunto watch is Suunto’s ability to have a user-friendly interface by keeping things as simple and neat as possible…as opposed to Garmin’s high priced complexity.

Hints for few improvements:

• it seems finally after many years Suunto removed a bug which prevented successful save of workout made with external heart rate monitor. I am no longer Spartan user but I see it as a minimum to push such bug fixes to Spartan users as well
• I would put “Weather” as part of the watch face screen in a way when watch screen is scrolled to left, weather would appear after notifications screen. This way I could always quick check baro situation or sea temperarure when doing casual sea or lake swimm (no body temp influence then)
• Suunto do give us a lock button as some users already suggested here
• Suunto give us some sound notification prior to interval begin (say last 5 seconds beep or similar to what Polar users have).
• Suunto give us possibility to save preferences per sport mode, most importantly Wrist HR. This summer, every time when going to standup paddle (SUP) I had to manually deactivate Wrist HR. It consumes battery and is of no use to me for such an activity where heart rate is relatively normal (except maybe for those minority doing races).

[MiniForklift]

@isazi said in Software update 2.12.30 Staged Release for S3/S5/S9:

@Egika @MiniForklift the manual setting of the first day of the week works only if you don’t sync time between phone and watch.

Yeah I have tried changing it to a Monday which works… until I upload my next workout and have to sync my phone/watch

Hey potentially dumb question, is there something in settings that allows you to turn the backlight on during training by shaking the wrist? Just got my running partner to switch from Garmin to a S9B and he says he can’t see a way to do this; he does most of his training before sunrise and as a result is having to run with the backlight permanently on

[isazi]

@MiniForklift said in Software update 2.12.30 Staged Release for S3/S5/S9:

Yeah I have tried changing it to a Monday which works… until I upload my next workout and have to sync my phone/watch

Yep, at the moment the Suunto App uses your locale settings, and pushes that to your watch, overriding everything you manually set. It is useful, except for the lack of deciding which is the first day of the week

Hey potentially dumb question, is there something in settings that allows you to turn the backlight on during training by shaking the wrist? Just got my running partner to switch from Garmin to a S9B and he says he can’t see a way to do this; he does most of his training before sunrise and as a result is having to run with the backlight permanently on

Don’t know of a way to do that on the S9.

[Dimitrios Kanellopoulos]

@MiniForklift only via options -> Backlight -> on. Either during or before. Its remembered though.

[Efejota]

I am very happy with the update. I would like to share a couple of thoughts, maybe @Dimitrios-Kanellopoulos have information on them

-Has POIs (not WP) management been abandoned? Although in the watch it would be great, I mean whether in watch or through the App.
-New bearing lock with distance and altitude is a great addition, but… Is the impossibility to access during an exercise something to be solved later or was simply never understood to work that way. Additionally, I tried it today and discovered that I had to point the direction. It makes it useless unless you have a direct sight of the point. It could be a good alternative for POIs if we could see the bearing in degrees. Then we could fix the point in a map (paper or phone), find the bearing and distance, and put it into the watch.
-Locking button (I know, you are insisting on it, it would be great to have it). Do you think it possible in the future?

[Dimitrios Kanellopoulos]

@Efejota said in Software update 2.12.30 Staged Release for S3/S5/S9:

-Has POIs (not WP) management been abandoned? Although in the watch it would be great, I mean whether in watch or through the App.

It will come, hopefully this year

[Dimitrios Kanellopoulos]

@Efejota said in Software update 2.12.30 Staged Release for S3/S5/S9:

Is the impossibility to access during an exercise something to be solved later or was simply never understood to work that way.

It has been asked but I am not sure

[Fenr1r]

@Efejota I suppose (and this is such a kludge) …

You could work out your desired destination’s bearing from the map, somewhere with an outdoor view. Sight and note the most distant identifiable point on the bearing and duplicate the process with the watch, locking in the arrow (& adding distance/elevation to taste). The reverse of actual compass navigation.

Or (even worse but possible in-tent) move the watch to line up its 12-6 axis with the compass plate/sight axis while the latter sits in the appropriate position on the map (as you would use it to find the bearing and maybe measure distance).

Make your angular error margins big, make 'em early.

[Efejota]

@Dimitrios-Kanellopoulos, @Fenr1r will like this information

[Efejota]

@Fenr1r you are right. But the possibility to see bearing in degrees rather than just pointing to a direction will lessen the possibility of angular error. Maybe I am mistaken, but I did not see that possibility in my first test with the feature.

[Fenr1r]

@Efejota Exactly. Sorry: that last line was meant to be an ironic coda to the “kludge” stuff. I am not genuinely keen on angular errors, big or small.

Viva Integers!

[Dimitrios Kanellopoulos]

@Fenr1r how about errors that need user input all the time. I think that costs more.

See

Its very easy to make a user input error for Angle Imo but I might be wrong.

You could change the bearing to the Castle 2 times quite easy though. Right ?

I like this discussion

[Fenr1r]

@Dimitrios-Kanellopoulos Depends on the purpose of your bearings. In your (excellently impromptu) pic, am I heading for that castle or just using it as a reference point to locate myself on its road? And what is the currency of this “cost”? Stopped time? Effort? Irritation?

I use bearings where there aren’t usable paths going where I want to go in the way I want to go. If I’m walking to that castle, there would be no 325d bearing for me because I’d either be walking North from pos1 or along that road. And probably not either, as castles are the known haunts of depraved aristocrats, many of whom are vampires.

Elsewhere, course correction can be constant. It’s why you check the terrain folds for their potential to obstruct real world features on your bearing. Assuming you can see anything. Fog, forests and night are not helpful in this regard.

(You know how you avoid those angular/sighting errors requiring repeated user input to reach a mapped feature? Coordinate entry. But who would put such a thing on a watch?)

That was long. I like this discussion too.

[Efejota]

@Fenr1r That is right.
How do I see the POIs use for navigation and how the absence of coordinates entry into the watch might be overcome?
My intended use (thankfully, I NEEDED it just a few times) is to be sure to find a certain point when I cannot navigate just with ground references (fog, forest, whatever). Also, in my A3P times, to have a clue on how far I where (I know, very basic, nothing compared to route ETE in S9B).
Let’s use the castle. I have it as a POI, then I can “reach” it if I can navigate to that point if I lost the road or if there is no road at all. Fog, night and wolfs are added components. Vampires come next. Coordinates is the best method.
If I cannot enter the castle coordinates, my only possible way is (if I know where I am in the map, of course), to get the bearing in degrees and an (approximate) distance and enter it using the new feature in navigation. A worse alternative, of course, but at least a possibility, similar to traditional compass navigation. I will need to check from time to time and it is very prone to error, but it is the best I can imagine if I cannot enter coordinates.
Here comes the conclusion. As most of the times I think of this feature for cases where my visibility of the destination is null (why should I need navigation if I have direct eye contact with my intended point), not knowing the bearing in degrees when locking the compass makes the alternative almost useless.
To be honest, what could the current implementation be useful for? I guess that there may be scenarios, but probably in sports that I do not practice.
I like the direction of Suunto with the firmware, but I still see that it has lost lot of its traditional ties with navigation.
And I like the discussion too

[inkognito]

@Fenr1r @Dimitrios-Kanellopoulos @Efejota

I would like to clarify the original idea behind the picture (it’s mine in fact ) This is the situation where the current bearing functionality will not help much unless you know the distance to the castle… But, via @Dimitrios-Kanellopoulos I yesterday suggested to Suunto guys adding a “triangulation” feature: you measure bearing to the castle from position 1, then you measure bearing from position 2 and the watch calculates the coordinates of the castle based on the intersection of 2 bearings