Spartan - reading the HR belt properly
-
It has been a few weeks that the figures (1) displayed on the wtach screen, and (2) recorded on Movescount, and coming from a HR belt, are incorrect. Eg between 170 and 230 this norning, or 30 the other day. I have changed the belt and the battery to make sure it the problem did not come from that. What can I do? Thanks
-
@mjoncheres
First, try a watch soft reset -
@mjoncheres Are you exercising inside? Outside? How’s humidify? What heart rate sensor are you using? How contacts on the sensor pod itself look – sometimes there’s rust or accumulation of dirt… Did you re-pair the sensor following battery change?
I remember Polar H7 needed to be reset (you short the contacts by reversing polarity with the battery for 30 sec) when it went berserk. Also, properly moistening sensors on the belt, or even using electrodes cream, might be a good check. I’d also try an alternative sensor if you have access to one, just to be sure it’s on a watch side.
-
@sartoric a soft reset worked very well, thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login