Live location S+ app

Nikolai Simonov

@Lazar-Dimitrov upd: should be fine in the latest Testflight update (72)

please let me know if it works or not.

Egika

@Nikolai-Simonov Both works now!
Sending message to iOS with Testflight version is working well plus the finished activity notification is gone.
When the watch is in a different screen than the S+ live tracking, there is a vibration, when a message comes in. It is rendered once I enter the S+ screen.
Have not tested yet, what happens if I send multiple messages before looking at the first one…

And sending SMS to a German number is also working.

This became an awesome tool!

SuperFlo75

German mobile number works now… in the regular app, not only in test flight thanks a lot!

Nikolai Simonov

@Egika Awesome great to hear it!

So, enjoy using it!

Panagiotis Kritikakos

@Nikolai-Simonov I still get the pop up for showing last route as mentioned earlier. Also, still not able to add a GR number.

graciti

Is it now possible to receive notifications on the watch (whatsapp, etc.) when you go live or can you only receive Messages from Live view?

Nikolai Simonov

@Panagiotis-Kritikakos

I still get the pop up for showing last route as mentioned earlier.

could you try reset browser cache?

Also, still not able to add a GR number.

will be next rollout

@graciti
it’s only from messages from live view, not sure if we able to share btle connection with suunto app on the same device in near future. only if suunto decide to integrate our app into their…

Egika

@Nikolai-Simonov just for unserstanding: if the live app is running, it is also not possible to add routes to the watch, because the BT connection is exclusively used for the live app?

thx!

Ecki D.

@Nikolai-Simonov Sad too hear that, hope there will be a solution some day.

Nikolai Simonov

@egika unfortunately, yes. however, as a workaround, the latest version (still in appstore review) adds a restore session feature.

so briefly
you will be able to turn off live.τ for a minute, sync with the suunto app (to update a route or something), and then turn live.τ back on, the app will let you continue your session without interruption.

it’s kinda hacky and not ux friendly solution, but it could works for non frequent things like an route update.

Nikolai Simonov

Hi everyone!

I want to make the development process and feature planning a bit more transparent for those interested. I also want to ensure the product solves real user problems, so I’ve decided to try launching a public feature request board for the project. - https://athletica.userjot.com

I think this approach will bring more clarity from my side and help me better understand actual needs. So please, jump in, vote for features, submit your own feature/bug requests, and feel free to share the link with anyone else who might be interested!

P.S. first time using userjot, hope it works smooth.

Antoine

Has anyone measured the battery drain with live tracking? I’ve noticed it’s consuming about 3% per hour.

Nikolai Simonov

@Antoine I had an idea to measure this, but haven’t gotten around to it yet.

Honestly, measuring power consumption properly is not as simple as it looks. Battery percentage is a very subjective metric, especially just on-eye observation.

To do it right, we would need to use a multimeter and run controlled A/B tests (baseline vs. tracking in background/UI) across different devices multiple times.

That’s the only way to get real consumption milliamp numbers instead of just rough estimates.

But 3% per hour looks great for continuous live tracking.

Antoine

@Nikolai-Simonov said in Live location S+ app:

@Antoine I had an idea to measure this, but haven’t gotten around to it yet.

Honestly, measuring power consumption properly is not as simple as it looks. Battery percentage is a very subjective metric, especially just on-eye observation.

To do it right, we would need to use a multimeter and run controlled A/B tests (baseline vs. tracking in background/UI) across different devices multiple times.

That’s the only way to get real consumption milliamp numbers instead of just rough estimates.

But 3% per hour looks great for continuous live tracking.

@nikolai-simonov : thanks for aswer.
Of course. It wasn’t a criticism. I just wanted to get a rough idea of the battery drain on the Suunto Vertical. My measurement isn’t super precise, but I’m usually at around 1.6% per hour during an activity (100% ≈ 65h). With the SuuntoPlus Live Tracking app enabled, it’s around 3%, but i just want to confim that (or not). My goal is simply to estimate the overall battery life of my suunto vertical 1 for a long race while using live tracking.

Nikolai Simonov

Hey everyone!

A couple of exciting updates are now live for those who enjoy following athletes via the web version.

Here is what’s new:

Smoother camera tracking: The camera following modes have been significantly improved - they now work seamlessly without any jerky movements. This is especially noticeable in the “dronie” view, where the movement physics have been tweaked to “realistically” simulate a flying drone.

Camera switcher: The camera mode switcher has also been refreshed to make it cleaner.

3D character: A useful… or at least a very fun new feature has been added! Instead of a simple plug/arrow on the map, it is now possible to switch to a running 3D character. (3D button in the right-bottom corner)

A quick heads-up about the 3D character:
Right now, it’s a basic stock model and it only knows how to run. So don’t be surprised if an athlete is speeding along on a bike while their character still running. There are plans to make these avatars much more interesting and customizable in the future… now just try it out.

Of course would be great to hear your or your spectator thoughts!

GiPFELKiND

@Nikolai-Simonov hey i use the android Version 1.0.12 ext

I had the message today NOT CONNECT 99
i cannot update this Version at Google Play Store. Can you Help me?

Nikolai Simonov

Hey @gipfelkind !

there are two ways to update non google play version:

there should be 1.0.13 (77)

1.0.13+ brings signaficant improvement to reconnection handle, so hope it solve 99 problem!

Nikolai Simonov

Hey everyone!

Glad to announce that Live Groups is finally in the early preview stage, and you can try it out right now.

You don’t even need the latest version to get started. Group setup can be done entirely through the web interface.

Here is all you need to do:

Connect your Suunto account in the app.
Confirm your email via your web profile (don’t worry, I won’t send any spam).
Create a group and manually add your partners.

You can also invite people via an invite link, but that’s currently only available in the TestFlight version.
You able to add to group any user with linked Suunto account

The link to watch the group live will look like this: live.athletica.one/live/+group-name

I’ve recorded a short walkthrough video to show how it all works:
https://drive.proton.me/urls/8RA2GZJHFC#3SfMbzrSV8sR

And quick demo how it looks for spectators:
https://drive.proton.me/urls/0NXMP4BV1R#zxaE0CLPdcwh

Since this feature is in early access, I would be REALLY grateful for any feedback! Let me know how it works for you or your club.

Ecki D.

@Nikolai-Simonov Have you thought about other datasources for the livetracking app. When it comes to groups, my first thought is - how to add that G. users to our group.

Further on my last ride I had to re-route on the watch during recording an activity. How can this be achieved in the moment? I couldn’t work it out without loosing the live track and stopping the activity to reconnect the watch to the suunto app. So I did just switch to directly back to start and let me route further with komoot and google maps.

Nikolai Simonov

@Ecki-D.

Regarding other ecosystems: Yes, expanding to users from other ecosystems is definitely in our plans for future growth. There is a lot to investigate regarding how best to implement this. One idea we are considering is a “guest account” feature that would allow users to join a group using just their phone’s GPS on demand. It’s one of directions, but there are still many details to work out before we can make it happen.

Regarding re-routing during an activity:
If I understand correctly, you want to maintain your live tracking session even if you need to stop an activity to adjust your route mid-workout.

So, here is how the system currently works: if you completely end an activity on your watch, it sends a “stop” message, which tells our service the session is finished. However, if the connection is simply lost without that “stop” signal, the service keeps waiting for new data until a timeout occurs. Even if the service on the phone is turned off during this time, there will be a “stalled” session in the app. If you start the app again, it should ask you whether you want to continue the previous session or start a new one. Because this involves several edge cases, it hasn’t been exhaustively tested, but it should work.

As a workaround for your specific situation, you could try this:

During your activity, hold down the bottom button to enter the settings.
Go to SuuntoPlus and turn off live tracking. (It would looks like a dropped connection for phone).
Stop activity
Set up your new route.
Once you are ready, re-enable live tracking as usual.
The live session should then pick up right where it left off!

So, hope it helps! And let me know if it works for you!