Software Update 2.46.14
-
@Tami999 Race flow is good, highly adaptable
-
@Tami999 Nice, I like Race Flow
-
@Tomas5 usually thing that are not mentioned in the release notes are not changed.
-
Anyone after update got problem like this?
When I don’t use watch for some time, move hand to wake up screen and my upper lower or crown button doesn’t work/react? I figured out I need to scroll down/up to menu or exercise menu than go back to main watchface and boom all buttons work. Than after some time of not use it happens again. Happened to me three times today.I am a bit scared to use ,do not disturb" mode because only way too wake screen is to press button and then it won’t work and in same way I’ll be unable to wake up screen.
-
@Tami999 I am not seeing that behavior. Have you checked your display settings to make sure they were not altered? Soft reset the watch?
-
@larrybbaker said in Software Update 2.46.14?:
@Tami999 I am not seeing that behavior. Have you checked your display settings to make sure they were not altered? Soft reset the watch?
Yesterday (after update) everything was fine. I did few minutes ago soft reset, we’ll see.
-
@Tami999 same issue, seems like we got same problems with this version as vertical 2 had in launch software. Also Suunto app doesn’t synchronize automatically always anymore, sometimes needs screen wake up and some scrolling to widgets, otherwise it says watch is busy.
-
@Tami999 My watch had the same behaviour.
I reverted back to the former version 2.46.4 which was ok. Then I updated to the latest 2.46.14. Since then it seems ok. I am testing it.
No luck. The issue is still here.
Which one to choose? Not recording heart rate or not responding buttons. Both happened to my watch. -
@szleslie said in Software Update 2.46.14?:
@Tami999 My watch had the same behaviour.
I reverted back to the former version 2.46.4 which was ok. Then I updated to the latest 2.46.14. Since then it seems ok. I am testing it.
No luck. The issue is still here.
Which one to choose? Not recording heart rate or not responding buttons. Both happened to my watch.I did rollback to 2.26.4 and so far problem solved. I won’t update since only one time HR stopped work for me on this version. On new version buttons problem happens all the time.
-
I have this button problem after update. Moreover, I locked the watch for some time using lower button and cannot unlock in some time, cannot do anything with watch. I had to do a reset. This is very annoying. How can I return back to previous version?
-
@newegor said in Software Update 2.46.14?:
I have this button problem after update. Moreover, I locked the watch for some time using lower button and cannot unlock in some time, cannot do anything with watch. I had to do a reset. This is very annoying. How can I return back to previous version?
Setting, general, information, scroll down to the list and than press and hold lower button like for 5s.
Hidden menu will show. Find ,Select OTA pkg". There You will find all versions of updates You ever had. You can choose older. I heard it’s not recommend to do rollback, but I did it many times on my three Suunto watches and nothing wrong happened.Oh and be careful because under ,Select OTA pkg" option is option ,Delete saved pkgs" that as it says it delete versions of update, and if I good remember if You click that by mistake it won’t ask about confirm! So watch out when You scroll :D.
CURRENT 1 is older one, You can see version of update In its name.
-
Yesturday i saw after update in my Race 2 SpO2 ismessuring all the time (red circle going and going) with no ststus summary. Anyone have the same problem. After todays night i have no messured SpO2 in whole night. Last night everything was ok. Watch is without drop. I did soft reset by push top button 15s. I dont know whots going on
-
@newegor
Since the update, I’m experiencing exactly the same issue. I’ve had to restart the watch multiple times already. When this happens, it doesn’t sync with the app either—it just shows that the device is busy. -
@newegor I’m experiencing the same issue: after locking, I can’t unlock it. I can’t connect to the app. I have to reset it.
I just got back. There are so many bugs. -
N newegor referenced this topic
-
@Tami999 this going to sound odd but could you scroll up on that screen so I can see the entire file name? I accidentally delete all the prior firmware and I’m having this issue and would like to downgrade.
-
In addition to the button locking issue, I have observed two other problems:
Sometimes it doesn’t sync with the app and shows that the watch is busy. It won’t sync until you randomly press buttons and turn the crown.
More worryingly, I’ve also noticed that the battery life has significantly decreased. Before the update, it could take up to 7 days to drop below 30% battery. Now, with the same usage, I’m already at 30% after just 3 days.
-
@Tami999 thanks for this ! However I did not have the 46.4 available only 2.46.14 and 2.41.48.25 any hints that could allow to go to 2.46.4 maybe ?
-
@Josaiplu said in Software Update 2.46.14:
@Tami999 thanks for this ! However I did not have the 46.4 available only 2.46.14 and 2.41.48.25 any hints that could allow to go to 2.46.4 maybe ?
@Tommylee84 said in Software Update 2.46.14:
@Tami999 this going to sound odd but could you scroll up on that screen so I can see the entire file name? I accidentally delete all the prior firmware and I’m having this issue and would like to downgrade.
If You Guys deleted/dont have specific version, iam not sure but I think i saw somehow on forum You can choose and download any version You want, and download it to Your phone & sync and install.
In past long time ago i accidently deleted all versions (delete ota pkg option dont ask for confirm :D)
-
@Tami999 thanks I check the firmware collection topic and I ask Claude to construct the url but no luck
If someone have the url or the 2.46.4.452 for race 2 I’ll be glad
Thanks for your help !
-
@Tami999 may I ask you a screen shot with the name of the 1_current ? With the full name we could have url
Edit found it 2.46.4 : https://firmware.geo.movescount.com/production/Wismar-fw_2.46.4.25276-U-6542ddd7.sof
and the current one 2.46.14 : https://firmware.geo.movescount.com/production/Wismar-fw_2.46.14.26212-U-a994f63c.sof
Your screenshot was enough to find the proper URL with some guessing thanks a lot
