Software Update 2.44.46 (2025 Q3)
-
@borgelkranz said in Software Update 2.44.46 (2025 Q3):
Another observation: in connected devices I have a nameless sensor that I cannot disconnect. Strange…
After pairing my 2nd cycling power meter to the Race, my Polar H10 HRM turned into a “nameless sensor” and my H10 could no longer connect.
And since the H10 configuration in the watch somehow got corrupted I could not delete the corrupted pairing from my watch. Also I couldn’t re-pair the H10 as the watch seemed to think that I have it paired already.
In order to be able to use my H10 HRM again, I had to factory reset the Race and setup the watch from scratch (and now wait for the watch to re-learn my HRV range).
So the multiple sensor support needs some more love (i.e. testing and bug fixing), Suunto!
-
@Mads-Hintz-Madsen ok, that makes sense. My “unnamed sensor” probably is my stryd that suddenly disappeared from the connected devices. However I could pair it again, though the unnamed sensor remains.
-
Doess anybody has some sleep detection errors since the update?
I Have several nights where it misses 2 or 3 hours of sleep -
@frullewulle sleep tracking is still very good after update both for me (SRs) and my wife (beta update on S9pp)
-
@Squirrel said in Software Update 2.44.46 (2025 Q3):
@orzechszek said in Software Update 2.44.46 (2025 Q3):
training is still recognized as Vo2max?
https://forum.suunto.com/topic/13517/how-comes-this-run-is-classified-in-suunto-app-as-anaerobic
Base on your suggestion I’ve changed to TSS(hr), but It seems it still base my trainings on pace, because it assign as Vo2Max. It is not a bug?
-
@orzechszek I had the same this morning : 1 hour trail running in Z1 but classified as Vo2max. I reported that through Sa beta program.
My 2 hours road cycling yesterday also in Z1 was properly classified as long aerobic.
Both with my SV and HR strap -
Very similar for me, running classification is currently very … creative, independently to the kind of TSS-zones I have chosen (TSS (hr) once again).
Biking is more relatable and related to the heart rate zones. -
And same here. No matter how I run, all this week’s runs were classified as VO2max. Even today’s very slow recovery run in Z1/Z2 (blue/green). I have the zones configured properly and use Polar H10 with a new battery. Even zone sense which normally works so-so for me showed 0 seconds in the VO2max zone.
I tried switching between rTSS and hrTSS, but it did not help. -
@kriskus for me setting the pace zones correctly fixed the problem. Although I use HR based zones it seems pace is now factored in.
-
It seems TSS
is still forced for classification. I have advanced zones disabled for running and cycling but it still uses it.
In my opinion, there is so many data, so if somebody has default configuration for all sports based on HR and specific TSS is set as default (for example TSS(hr)), then pace zones should be simulated for that training base on HR. Similar behavior when TSS is used. -
And it also seems it got messed up after the latest update which forced a reset of the zones to default.
-
Hi everybody, I have an issue with ZoneSense: it stopped working on Race S after an update to 2.44. Perhaps something should be tweaked, but I don’t get where and what.
- chest strap is repaired after the update
- ZS Suunto+ doesn’t show anything
- exercise options - Intensity zones switched to ZS: no “readout” triangle, just a green stripe on the left side (only if ZS target is set).
- also updated heart rate zones just by changing max HR - no ZS
- also no ZS data in the app after sync.
What do I miss? Or is it a bug?
-
@Brad_Olwin @Dušan-Ković @duffman19 A tester has reported the bug with Suunto already.
-
@Tieutieu is this not conflating two different systems? The automatic run type assignment is based off the personal zones set for HR, Pace & Power, whilst TSS is based off whichever of those you choose (+ZS) to generate a TSS number.
For the record I redid my zones after the reset and had a long aerobic run counted properly and an anaerobic run counted properly too.
Suunto Spartan Trainer Wrist HR / 9PP Refurb
-
@Alonzo said in Software Update 2.44.46 (2025 Q3):
Hi everybody, I have an issue with ZoneSense: it stopped working on Race S after an update to 2.44. Perhaps something should be tweaked, but I don’t get where and what.
Have you confirmed that your external HRM is actually used during your activity?
Some users have reported that they need to manually activate sensors when starting an activity if they have multiple sensor of the same type paired.
-
@Mads-Hintz-Madsen yes, HR data comes from repaired chest strap. Wrist OHR sensor is turned off actually.
-
@The_77 not sure to understand what you mean. I have set my hr zones to « hr zones the same for all activities ».
So my Z1 run should be long aerobic -
@pavel.samokha
This update corrects the Turkish translation errors in the play menu that I mentioned earlier.
There’s also a weather unit option for wind speeds in meters per hour, kilometers per hour, or knots. In Türkiye, we use kilometers per hour.
-
@Tieutieu I meant setting pace & power zones too
-
@The_77 ok got it. I only use HR zones, set the same for all sports.
