Resources bug V2.46.4
-
So Iām not only one with not working resources.
Resources showing recovering all the time, doesnāt really matter what I do, heart rate can be over 120bpm. So I think there is a bug. Hardware seems to be okay cause sensor works normally.
Version 2.46.4, soft reset done, hard reset done. Didnāt work.
-
@nicovoim for the record I have exactly the same problem. Also soft reset. Just did a hard reset. Letās see if it makes any difference
-
@nicovoim Your watch likely needs a week or so to calibrate and establish your HRV baseline. A hard reset probably made this worse, as it forces the watch to start learning from scratch again.
SV: fingers crossed :D
S9 (non-baro): died after 2 months, replaced, holding strong since 03/20
Spartan Trainer: casing broke after 23 months, repaired, lost watertightness 5 months later, died
Despite some pretty bad luck, I still love Suunto! -
Same issue here with brand new SR2. I did power the watch down yesterday, nothing has changed since.
-
@inkognito i donāt think it is connected to hrv. It has to be connected to pulse variables.
-
@helgonet12 It works based on your HR and especially your HRV, which it checks periodically. Just wait, give your watch a few days to get to know you. Everyone is different, and the watch really needs some time to adapt. I had this with both S9 (once Resources were introduced) and my SV.
SV: fingers crossed :D
S9 (non-baro): died after 2 months, replaced, holding strong since 03/20
Spartan Trainer: casing broke after 23 months, repaired, lost watertightness 5 months later, died
Despite some pretty bad luck, I still love Suunto! -
@inkognito great. Thanks š¤©. Iāll give it some time
-
@inkognito waitā¦ In the daytime WE now have HRV Measurement too??? I thought only while sleeping??? Please answer us
If it doesn't challenge you, it doesn't change you. #lifewithasthma #runwithasthma #nevergiveup #pushinglimits #adventurestartshere Suunto Ambit 3 Peak , D9, Vertical Ti, Race , RaceS Courtney, Race 2, Vertical 2, SA (Beta) Android Insta: @gipfelkind
-
2.46 vs. 2.44 - I wonder what is addedā¦
-
@GiPFELKiND The watch does indeed measure your HRV throughout the day in the background; itās how it calculates your āResourcesā. This isnāt new and has been a feature for a long time, even on the original Suunto 9 series. You could actually spot when the S9 was measuring HRV because its sensorās green light would be constant, not blinking like it did for heart rate alone.
āThat data or its trend is simply fed into the algorithm and isnāt presented to user, most likely because daytime readings can fluctuate wildly and wouldnāt be very useful.
āSo, in short, nothing has changed on this front.
SV: fingers crossed :D
S9 (non-baro): died after 2 months, replaced, holding strong since 03/20
Spartan Trainer: casing broke after 23 months, repaired, lost watertightness 5 months later, died
Despite some pretty bad luck, I still love Suunto! -
@inkognito great. Thank you so much for this information
wish you a great day -
@inkognito Does the Suunto Race 2 use the same algorithm source as Suunto Race 1? Or did Suunto go over to their own for the Race 2?
-
@helgonet12 Iām afraid youāll have to ask someone else. Full disclosure: Iām no Suunto insider, just a long-time enthusiast. Iāve been around for more than six years, and because the technical stuff has always fascinated me, a lot of the details have stuck in my memory
-
@inkognito ok. Then I hope youāre guessing is right but I doubt it. I never experienced this behaviour on vertical or race 1. And to me it seems strange that it will be corrected after 2 weeks. But we will see
. Thanks for your help 
-
@helgonet12 One last thing that comes to my mind: is your resting HR and max HR set up correctly in your watch?
-
@inkognito yes, I have the same as on my vertical. Also updated my Zones. Did my first run with Race2 and I have no Zone sense data in app or during the run on the watch.? Do you know if you have to run a couple of times before it shows up?
-
@helgonet12 Zonesense should work from the first run. But it needs long enough run (first 10 minutes are used for calibration) and you need to use a HR belt. But you probably already know that, right?
-
@inkognito yes I know and my run was about 50min and puching my self between 60-80%. No zone sense data on the watch š„²
-
@nicovoim I got a Race 2 to play with for a few days and have a same issue. Resources are super high every day and I have noticed there is no stress measured. I.e. previously there was usually stress measured directly after an activity, now I am just gaining resources : ) I donāt think itās calibrating, as it was already mentioned, I think it isnāt working properly.
-
Went for a easy relaxing 5K run today. The run felt nice but I think Suunto over estimated the ārelaxingā part a bit
Resources went up from 24 % to 68 % while being active. Someone else seen this ?But hey! At least the run wasnāt taged as Vo2Max
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login