SOFTWARE UPDATE 2.35.34 Q2
-
@Danny-poleg To make it work you have to be following a route, then you will be able to do zoom in the profile. You can create one in Suunto App, and follow it during the activity and you would see it working.
-
@Likarnik I’m usually at around 50 - 60 HRV, but recently had a month of 60 - 80 which, again, came down to 50 - 60 with occasional 60 - 70. And it started and ended abruptly with that weird month. It happened regardless of the new firmware. The only thing that might have changed in my case was the increase of vitamin D, as I’ve started supplementing due to deficiencies. Training load seems similar, but I guess it’s called “variability” for a reason
Perhaps you’ve changed something in your diet or had a perfect sleep, and it’s not related to the firmware?
-
@cosme-costa Unfortunately, this is a route created or uploaded to the application
But it doesn’t work for me - are there certain conditions for the elevation level, etc. -
@Danny-poleg It’s possible SA does something new to routes, post-FW update, to enable Climb Guidance. Routes already on the watch may not work with CG…
-
@Danny-poleg you need to have a route synchronized with the watch after the firmware update that brought the feature. You may simply create a duplicate of your preexisting route (in Suunto App) and synchronize the duplicate and check again. The old routes may be missing the data required for the new elevation screen to work properly.
S9PP 2.37.48
-
@Danny-poleg said in SOFTWARE UPDATE 2.35.34 Q2:
@cosme-costa Unfortunately, this is a route created or uploaded to the application
But it doesn’t work for me - are there certain conditions for the elevation level, etc.maybe it is better to start a new thread with this question regarding the climb guidance…
-
@Danny-poleg @Łukasz-Szmigiel I didn’t need to duplicate: just sync to remove from watch and sync to put back.
-
Regarding battery drain:
Welcome to the club, guys! My 9PP battery was ruined after 2.30.32 update in November and since then has only 12 - 13 days of life. With just only ~7 hours of gps road running withount navigation in between and nothing more, laying down on a shelve.
Maybe this is a coincidence, but after that update the overall quality of the software greatly decreased and now every new update brings lots of annoying bugs
-
@Egika thanks a lot!
I will follow the shared guidelines! -
@Fenr1r cool, good to know. I had to duplicate. But maybe because I was using it already?
-
@Mitch9 thanks! I haven’t noticed anything weird. Let me check the next time I’m going to the gym and I’ll check what setting I have. I’m using the indoor climbing activity.
-
I have a problem, the weather complication doesn’t change/updates the temperature on this WF on my Vertical, even after I go to the weather widget… Only after I sinhronyze with Suunto app… Before the update it worked with no issue… And all permissions are allowed… Anybody have this problem, or a solution?
-
Hi, has anyone noticed any bugs in the watch face regarding solar charging indicator? It looks like the solar charging indicator is malfunctioning! Does it happen to you too? I would like to have feedback to rule out a malfunction of the solar panel (it was replaced a month ago).
-
@jjpaz Hello,
I have shared also in this thread issues regarding the charge.
nothing really work for me, i have changed all configuration related to battery draining, got better results yea but i never went beyond 10 days ich with my solar vertical… i should get 20 days at least with my current usage.i have finally decided to do a soft reset (from the watch, where it does reset all the parameters) with the latest FW. it took ~10 minutes, the smae to put back all parameters.
until yesterday, I had done only watch reboot (turn it off and on again)
Since the soft reset, it seems that it fixed my drainage issue. its been since yesterday 11PM. until this morning 9AM, i was 99% and I am still 99% and a small walk 40 minutes with GPS already registered!
Now we are talkin, I will let you know after several days, but I have a good feeling about this, finally My Suumto Vertical Solar at its full potential! -
One extra thing I’ve noticed - I’m actually getting stand up notifications for the first time ever since the latest update, whilst sat down to do work. Shows the filter change at least!
Suunto Spartan Trainer Wrist HR / 9PP Refurb
-
@isazi
I have a problem, the weather complication doesn’t change/updates the temperature, even after I go to the weather widget… Only after I sinhronyze with Suunto app… Before the update it worked with no issue… Anybody have this problem, or a solution? Couple of people reporting same problem on FB…
,
-
@The_77 said in SOFTWARE UPDATE 2.35.34 Q2:
One extra thing I’ve noticed - I’m actually getting stand up notifications for the first time ever since the latest update, whilst sat down to do work. Shows the filter change at least!
i have also since last update. seems to work much better, as it seems accurate for my case!
-
@Antoine-Lancrenon said in SOFTWARE UPDATE 2.35.34 Q2:
@The_77 said in SOFTWARE UPDATE 2.35.34 Q2:
One extra thing I’ve noticed - I’m actually getting stand up notifications for the first time ever since the latest update, whilst sat down to do work. Shows the filter change at least!
i have also since last update. seems to work much better, as it seems accurate for my case!
Same for me - my first one today
-
Hi all, one question for my vertical… whiy the software download is not available yet? it says my watch is updated but not yet on this new version. Should I wait some more time? Im in italy. thanks
-
@giuliosq What is Your current version? Its 2.35.34 now.
