SOFTWARE UPDATE 2.33.12 - Q1 2024
-
Is it possible to revert to the previous FW?
-
Hi everyone
I’m a new user of Suunto Race Black, I don’t have much experience with this type of device but I would like to share my thoughts about the new update:
- the update process went without a problem
- device responds correctly, no problems with the operation of the buttons and crown
problems that appeared after the update:
- already twice the watch could not synchronize data with the phone (Samsung Glaxy S21) - restarts of the phone helped.
- there were problems with data synchronization between the watch and the Suunto app - in my case, the sleep tracking data differed between what was in the watch and in the app. In the app the data was incomplete, 2 hours were missing, I thought the data would be completed on the next sync. Unfortunately, this did not happen. According to the information I was able to find on the forum, it was necessary to perform a reinstallation of the application. It helped, for 2 days. Today the situation repeated, again the data in the application is incomplete.
I noticed that the problem may occur when the watch has not yet registered that the user got out of bed, or has not finished recording the sleep data, because when I checked the sleep registration status on the watch, the message summarizing the sleep time did not appear. It appeared only after several seconds indicating the total value of slept hours unfortunately incomplete data had already been synchronized in the application.
-
@enneo this is watchface? there is the same available in SV?
-
@gerasimos no, unfortunately this watchface is not available for Vertical.
-
@RaDeck The problem has been identified for the Race by several users and has been reported, I believe, to the Suunto teams. I don’t know about the Vertical. I’ll take advantage of this answer to point out an observation from my training today: when navigating a trail outing, the data screens don’t suffer from the reported readability problems. In any case, on one outing (4h30 all the same). Coincidence or not?
-
Hi! Mi S Race has been acting weird after the SW update when it is in the water, specially in the shower. It is like if the water drops operate the touchscreen and the watch goes mental through all screens and functions. Has anyone else noticed something similar?
-
@Meneillos I had this experience even with the previous fw but now it appears even more sensitive.
-
@Meneillos said in SOFTWARE UPDATE 2.33.12 - Q1 2024:
Hi! Mi S Race has been acting weird after the SW update when it is in the water, specially in the shower. It is like if the water drops operate the touchscreen and the watch goes mental through all screens and functions. Has anyone else noticed something similar?
This problem has existed in Race from the very beginning. It is not possible to lock the screen/keys outside of activity.
-
@Meneillos said in SOFTWARE UPDATE 2.33.12 - Q1 2024:
Hi! Mi S Race has been acting weird after the SW update when it is in the water, specially in the shower. It is like if the water drops operate the touchscreen and the watch goes mental through all screens and functions. Has anyone else noticed something similar?
I had the same all the time before the update already.
Before going into the shower or water, I now use the DND function, which I’ve assigned to the top button shortcut. Thus the watch will not wake up and not be affected by water on the screen. -
I have the same sync problems of activities between Suunto Race and Sunto App running on an iPhone after the update as mentioned by @Draculax and @Niclas-Brundell . Haven’t found a solution yet. I tried to re-sync a couple of times with re-start of all devices, etc. still no success.
Anyone else experiencing such connectivity/sync problems?
-
-
@Mff73 thank you for pointing me to the correct thread!
-
@gizmo One of the strangest things with Suunto is that we can’t lock the watch when not exercising. Suunto please, please add this to the next update
-
@Iggge hum…watch automatically locks itself when not exercising, after around a min of inactivity. You need to press a button to reactivate it
(Works for sur on S9pp and SV) -
@Iggge i have made a lot of requests for that function… After ambit peak does exist in any model and it’s so simple…
-
@e6321 said in SOFTWARE UPDATE 2.33.12 - Q1 2024:
FYI airplane mode in control panel doesn’t do anything.
Same here (S9PP)
I have to go into the settings, connectivity, to activate the airplane mode for real, and to cut the bluetooth connection to the iPhone.But the airplane switch in the control panel has no effect, the iPhone still synchronises with the watch.
-
Hi !
I have a weird bug on my 9PP since the update.
In “Gym Timer” for example, the lap button don’t do anything, it just record a lap.
It used to go to the next exercice or something.
Am I the only one ? -
@Tieutieu not the Race, at least. I get in the shower with the watch locked and as soon as the water drops start to hit the touchscreen it goes throug menus, screens, etc.
-
@Neblazok said in SOFTWARE UPDATE 2.33.12 - Q1 2024:
Hi !
I have a weird bug on my 9PP since the update.
In “Gym Timer” for example, the lap button don’t do anything, it just record a lap.
It used to go to the next exercice or something.
Am I the only one ?@Neblazok On my 9PP this also happens on any screen except for the “Gym Timer” screen, where the bottom button does work.
-
Hi @Neblazok, FYI we’re discussing this issue in this post, in the context of the 7 Minute Workout S+App! Some code got lost in the last update? If anyone can confirm/replicate the issue, it would be useful, thanks!
