Software Update 2.30.32
-
Hi guys. Where is possibility to measure blood oxygen saturation hidden now? In previous FW there was function for this. It was possible to perform this measurement manually anytime not only during sleep. Now it is gone?
I noticed that they switched buttons when alarm beeps. Upper is now for snooze and lower for stop. Before it was opposite.SUUNTO M2 - retired, SUUNTO M5 with bike pod - retired, SUUNTO Ambit3 Peak Sapphire customized, SUUNTO Spartan Trainer - retired, SUUNTO 5 Peak, SUUNTO 9 Peak Pro Titanium
-
@AntoniusGaius it is among widgets. You can activate it through “customize” menu or from Suunto App.
-
@Александр-Даниленко Yeah
Thank you. -
@minimark069 said in Software Update 2.30.32:
Hi first of all loving the latest UI I have noticed a couple of things since the update last week;
-
I didnt get my weekly summay last night (is this due to not having completed 1 week since the update? is it still available?)
-
I havent been prompted to stand yet ( i do sit for my job but it would not suprise me if i stand up before it i get to the 2 hour limit)
but other than that I am really happy it feels like i have a new watch!!
I have the same issue on my Vertical since the update two and a half week ago:
- No message for daily goals reached
- No weekly summary shown on Sunday evening
- No stand up message (which I would not miss anyway, tbh).
Can maybe anyone confirm if this is already listed as a bug of the new software?
Suunto Quest / Suunto Ambit 3 Peak / Sununto Spartan Sport Wrist HR / Suunto 9 Baro / Suunto 9 Peak Pro / Suunto Vertical / Suunto Race S
-
-
@Stoke80 not really to confirm, as I get the daily goals reached notifications…
t6, S6, Elementum Terra, Ambit 3 Sapphire, Spartan Ultra Copper, Traverse Alpha, S7 Graphite LE, S9B Ambassador, S9P Granite Blue Titanium, S9PP Titanium Sand, Vertical All Black, Race Titanium Charcoal,
Race S All Black - TI Canary - Titanium Courtney -
@Egika said in Software Update 2.30.32:
@Stoke80 not really to confirm, as I get the daily goals reached notifications…
I can confirm I get these and also the stand-up reminders. Don’t remember if I had a weekly summary yesterday. I don’t think so.
S9PP
-
@taziden at least if the summary does not stay long enough until confirmed, it can be improved.
-
@Egika said in Software Update 2.30.32:
aily goals reached n
As said, I don’t get them. And it seems I am not the only one.
After doing some soft resets after the update, to see if that does the trick, I also did a hard reset (adviced by Sunnto support) last Monday. It didn’t help as well.
-
@AntoniusGaius I guess I should consider myself lucky because my CTL TSB and HRV numbers are same in both. I got saturdays TSS numbers day late but today I got them after run. I also got my weekly notification on sunday evening. I hope we get these patched soon and not have to wait 6 months to get new bigger patch that may or may not fix them.
-
@Francesco-Pagano, that is a great new functionality. Thanks for sharing! Running on a treadmill has always been a nightmare when it come to capturing the accurate distance.
@fv4500, after you finished the treadmill exercise, when the summary screen is displayed, scroll down until you see the distance you ran. Note that it says “edit the distance” (I guess, my locale is French
). Press the middle button to enter the actual distance. -
@Danny-Labrana said in Software Update 2.30.32:
@Francesco-Pagano, that is a great new functionality. Thanks for sharing! Running on a treadmill has always been a nightmare when it come to capturing the accurate distance.
@fv4500, after you finished the treadmill exercise, when the summary screen is displayed, scroll down until you see the distance you ran. Note that it says “edit the distance” (I guess, my locale is French
). Press the middle button to enter the actual distance.Yep! Found it! Thanks you both! I was hoping the same edit can be done for crosstrainer sessions, but it seems you can’t. Which seems weird because you can actually edit the distance of a crosstrainer activity directly editing it in the Suunto App.
-
with great joy I have just discovered that there is a watch face that reports the barometric trend as in the old days of the good Vector
-
@Stoke80 I saw a “stand-up” notification once on my S9PP. There was written something like “You didn’t walk for 2 hours”.
However, I also would say that probably most of us don’t see this notification because of bad step count algorithm in the watch, which can count you some steps when you just move your hand while sitting…
For example, I saw this notification pretty often on my old Huawei Watch Fit, where step counting works perfectly.
-
@robis said in Software Update 2.30.32:
@Mff73 said in Software Update 2.30.32:
@robis said in Software Update 2.30.32:
Hello, thanks.
Just one question: now oHR, during an activity, is always active even if disabled in the options. Am I missing anything?i didn’t check myself, but if correct, it is then same bug as in SV latest FW .
https://forum.suunto.com/post/132349A follow-up to this, just discovered after a short evening run. If you do not want HR monitoring during an activity, simply turn off the HR belt sensor as well.
This is what I found too - because if I do this, the heart icon isn’t shown on the pre-start screen and no value is shown in the HR data field after starting.
But I checked and the sensor is still turned on after starting the activity. No HR data is recorded but it’ll still use battery power (which is why I turn it off on long races). To stop it doing this, you also have to turn off 24/7 HR tracking in the general settings, otherwise it overrides the activity settings and keeps the sensor on.
-
@Egika just to let you know that it works correctly now! The problem is solved! Thank you! I recently switched from an (old) Polar and I can say I am in love with my S9PP!
-
Yes, that is a possibility.
But still I would like to see those messages again. Especially the weekly summary. And it doesn’ work since the update.
Before no problem at all.
Anyway, I am aware that this is not a major issue at all.
-
I’m also experiencing the “TSB data a day later” I first thought it wasn’t going to bother me, but yesterday my watch was telling me “ready to exercise, loosing fitness” while the app was screaming “OVERTRAINING HIGH RISK OF INJURY” since I just ran an ultra marathon…
Yeah, its annoying -
@MKPotts said in Software Update 2.30.32:
To stop it doing this, you also have to turn off 24/7 HR tracking in the general settings
I hadn’t tried that so I just checked and you are right! I hope they will fix it
-
Hi, I’m new here and not sure where to post this. I recently bought a S9PP having previously had an S5.
I link to Training Peaks to get my TP Structured Workout as a Guide. In the past the Lap button created a lap but also advanced the structured workout. After my purchase, I configured my S9PP and updated the software to the latest version, but when tried to use my structured workout on Saturday and today pressing the Lap button creates a lap but does not advance the workout. Is this a bug or am I doing something wrong?
Thanks
-
@grantgrobbelaar Hi!
I don’t use TP, but create training program in the Suunto App and use it for swimming.
I tested it on my training session on Sunday and it worked fine - after pressing the lap button the watch gave me instructions for the next exercise. My S9PP also has newest update installed.
