S9B BLACK SCREEN
-
Hi to all. This morinig at the wake up I have had the same problem (black screen); I remember that the battery was around 48% when I went to sleep. Next time I will try to send the log with Suuntolink.
-
3 days old S9 Ambassador. This morning blank screen not responding to anything. Battery was in the 60. Holding the up button for looong then the watch made a sound and the watchface was shown. The recovery was affected but the sleep info seams ok. Sent the logs to Suunto. Hope this is SW issue and i do not have to return the watch.
-
@hristijan-petreski Are you in the last firmware? Last time it happened to me was on February.
-
@cosmecosta Yes latest firmware and very new watch (only 3 days). I sent some more details to @isazi and looking forward to share any findings. Great support and forum btw.
-
Hello. Last night this issue happend to my S9B, which is just a few days old since delivery.
I could solve the issue with a soft reset. Just to let you know - with the actual software the issue is still there. (When it isn’t a hardware fault). When it happens again, I will contact the support. -
@Alex-M-0 said in S9B BLACK SCREEN:
Hello. Last night this issue happend to my S9B, which is just a few days old since delivery.
I could solve the issue with a soft reset. Just to let you know - with the actual software the issue is still there. (When it isn’t a hardware fault). When it happens again, I will contact the support.Last night while sleep tracking, it happend again. This time I could see a gap in the HR monitor graphic from the point of interruption until my soft reset.
You know. I am a bit sad because my Suunto 9 (non Baro) never had this issue. Now my sister got the watch
I really hope a new sw release will fix it.
This time I also made a hard reset with the option to send the watch too deep sleep after reset.
I woken it up and configured again. -
Well, my S9B got a black screen again, for me, this bug was resolved in the previous firmware but now, with the last firmware 2.23.20 it has came back.
The symptoms and solution (soft reset) are exactly the same than when the bug pop up.
I can’t send logs right now (no computer with Suuntolink).
-
@cosme-costa
I’m always sending logs thru the app.
not good, that it happens again -
@cosme-costa I forgot to reply, but yes logs from SA are as good as from Suuntolink (there may be some differences, but for a watch issue it should not matter).
Watch: Suunto Vertical Ti
Blog: isazi's home
-
After I’ve made the update, in the same day, also I had a black screen. Soft reset and after no issues.
-
Hopefully it will not happen again, but if it does send logs with the black screen (it should work) and also after the reboot. And then send me a message.
Watch: Suunto Vertical Ti
Blog: isazi's home
-
@isazi Will do!
Thanks!
-
Well it has happened again this morning.
I always wear my watch, even while sleeping. Today I woke up, took off the watch to put my clothes on, in the mean time the watch screen went off (as it should), then I took the watch to put it on and the screen wasn’t able to lit up and again it was solved with a soft reset.
@isazi I have sent logs to Suunto with SA and I did the soft reset around 6:04 a.m.
I do not recall having this issue with the previous software but it was there prior the previous software. It has happened two times in one month and a half. The shitty thing is that if happens before the activity, due the soft reset you loose the AGPS and some times you can’t wait 15 minutes (sync and deploying of the AGPS file) to get the GPS lock.
-
@cosme-costa
after sync to SA AGPS should be sent to the watch again. it takes some time but much less than waiting for sat lock
-
@cosme-costa can you send me your email in SA? I think I do not have it.
Watch: Suunto Vertical Ti
Blog: isazi's home
-
@isazi I’ve sent you a PM!
Thanks for looking into it!
-
@cosme-costa it takes a lot of time and sine you get up early it reduces the time you can train
-
Dears,
today, my nightmare came true. My display turns black while I was looking at it, and it did not wake up. 12secs soft reset is not working. Display is black and watch is not responding to buttons press. I see that from time to time, HR led flashes very shortly. Then I saw that suddenly, after few hours of black display, normal watch doisplay restored for few seconds and nearly immediately went back to black. I tried to connect it to Suunto link but it did not help. Suuntolink did not recognize the watch. After few attempts in Suuntolink to connect the watch, it seemed for a while that it is connecting to watch but then no success again. Anyway I pressed the Send Logs button, and Suunto link gave me an ID and claimed that it has sent the logs. I wonder, what logs it sent, when it could not connect to watch. Well, if that could help, this is the ID - 863443733300. Maybe, @isazi , could I kindly ask you to check with support, whether there are any meaningful logs and what to do next?
I guess that watch is somehow stuck and I need to wait for complete battery drain. Which may takes days… ),:Suunto S9 Baro Titanium, Ironman l.e.
Suunto Smart Sensor
Wahoo Tickr FIT
Hammerhead Karoo 2Swim Ride Run Rest Repeat
-
@zadow
sorry to hear and hope you can get your S9B back to life!
-
@zadow
Try thisPlug in the watch to the PC and open Suuntolink
- When the watch is recognized, press the three horizontal lines symbol on the top right.
- Go to watches.
- You will find the watch name there.
- Click many times on the name (5 should be enough, but keep pressing until a checkbox appears)
- A checkbox will appear. It will say to “Put the watch to deep sleep after reset”.
- Check the checkbox, and then click on “reset all settings” above it.
- Follow the instructions.
- Let the watch go to deep sleep.
- Unplug the watch and then plug it in again: if this worked, it should start again from the original boot and it should then work normally.
