Software release 2.30.26

[Walter Samuel]

@suzzlo Thanks for the answer It’s a shame, maybe we’ll have to wait.

[suzzlo]

@Walter-Samuel the good thing is that if Suunto is in control of the algorithm, they should be able to correct problems (in case they are)
In my experience, “Resources” have never worked ok. I hardly get more than 60%-70%, and the answer was always that these was a Firstbeat problem (or at least Firstbeat&Suunto integration problem)

I hope it can help to deliver good metrics

[Martin Vrska]

@Dimitrios-Kanellopoulos The data from the Suunto application does not synchronize with the watch - again I had to do a soft reset for the correct values. Any advice?

[houndsgarden]

Hallo zusammen, kann es seit, dass nach dem Update die Erholungszeit nicht mehr angezeigt wird? Ich kann sie nicht mehr finden.

[Wilson75]

Hi folks, did you notice an excessive battery drain?

I didn’t have the time to test the new firmware. I updated my watch directly at the release date with 54% and today 20%.

[A Former User]

@Wilson75 not on my watch. Had about 70%+ before update (can’t remember the exact number) and did 8h of activities already and have 57% now… quite the opposite (and impressive!).

[A Former User]

@Martin-Vrska @Dimitrios-Kanellopoulos I’m also experiencing the same behavior. Data is not syncing unless I perform a soft reset. Not critical, just reporting.

[Mff73]

@Wilson75 said in Software release 2.30.26:

Hi folks, did you notice an excessive battery drain?

I didn’t have the time to test the new firmware. I updated my watch directly at the release date with 54% and today 20%.

Any battery “issue” right after FW update could be just normal, or at least one need to do a full cycle from 0 to 100%.
Let’s confirm or not after.

[Tieutieu]

@Wilson75 not extra consumption notived.

That’s the gps precision that bothers me. Tried yesterday again : the track I recorded was less smooth and less precise than usual.
Let’s try again today…

[Juhani]

Hi, I can repeatedly get my SV to the state where it is not syncing with the app without soft reset. All I need to do is open the map and zoom out to 500m. Then I see only the black grid instead of the map and everything turns sluggish even when I return from the map and the watch is not syncing anymore. I have reported the map issue to support and there are a few mentions on other threads. Maybe related to certain location? I will do a bit more testing over the weekend, unfortunately no travelling in the near future so I will be on the same map area…

[fluca]

@v-sacre I agree with you. It is improved but still you can’t have a recurrent weekend alarm different from the weekday alarm. Which is my use case.
Anyway thanks suunto to try improving this feature.

[Piotr Grygiel]

What about automatic map updating?

[vpet_09]

@Juhani as I wrote in no maps -thread, I am also seeing basically just black grid on every zoom level, this is happening in Finland Espoo area. With the old firmware everything worked just fine, so this seems to be bug in this newest update.

[Juhani]

@vpet_09 Seems so. I’m also in Espoo. I also had no problems with the old firmware. I’m a bit tempted to try this in Vantaa

[jjpaz]

@Martin-Vrska Same here. TSS info doesn’t sync from App automatically.
Only after soft reset, not practical at all…

[Tami999]

@Wilson75

I noticed it too, but I’ll re-post when re-charge battery again in few days. Maybe its just need to go 0% and recharge to back to normal.

[Tomas Prochazka]

Hi. I am from czech republic, and update still not ready to download.

[nassoscal]

@jjpaz sama here too. after two different sessions, I had to reset it in order to update the watch.

Also can someone please tell me where the recovery time has moved? under which menu is it? I can t see to see it

on a side note - sleep was recorded as 3:15 instead of 7ish.

[GiPFELKiND]

@houndsgarden die Erholungszeit wird nur noch in der App im jeweiligen Training angezeigt. Nicht mehr in der Uhr. Das liegt daran dass Suunto die Kooperation mit Firstbeat bzw die Firstbeat Algorithmen die vor dem Software Update auf der Uhr waren wohl in Gänze durch Suunto eigene Algorithmen getauscht hat. Mit der neuen Software entfällt somit die Anzeige der Erholungszeit da jetzt deine Erholung als HRV zb angezeigt wird. Finde ich persönlich gut aber es erfordert ein bisschen “umdenken”

[BrunoH]

After the update Vertical is showing 5-6 hours of sleep instead of actual 7-8 hours. Today I did a soft reset and I suddenly saw another sleep summary for 10+ hours. Now I have 6h in SA and 10h in the watch.